Tour Pack for Harley from Amazon

Рет қаралды 133,085

Күн бұрын

Amazon Tour Pack 2014 & up on a 2012 Street Glide
Mounting Bracket:
www.amazon.com/Detachable-Mou...
Tour Pack:
www.amazon.com/TCMT-Backrest-...
Not the same seller for tour pack so not sure if the bottom cover will be the same material.

Пікірлер: 147

@richardedwin5980 4 жыл бұрын

That should've come with a flat metal internal mounting plate as well that gets placed inside the tour pack on the bottom in the area of that square. It helps keep the pack rigid when hitting bumps and under load. In the configuration you have that pack is going to crack. As far as the bracket...on your docking hardware bushings there are smooth spots that are designed to be angled in a certain direction. If all 4 are not lined up correctly you will experience what you did. Run your fingers around the bushings where the rack connects and you'll see what I'm referring to. Good luck.

@antoniobrown3219 4 жыл бұрын

Thanks bro, I'm gonna order the Chopped Tour Pack in the near future. 👍🏾✌🏾

@dennism103 5 жыл бұрын

Great choice on the bolts btw...

@carlblair6627 2 жыл бұрын

I bought mine off of Amazon. Cost me than $300.00 with the mount. Had it painted. I am very happy with it.

@rudyjuarez82 3 жыл бұрын

FYI , the docking hardware plastic bushings need to be rotated so the flats are top and bottom because they are elongated not round. Might need to loosen the screws slightly to rotate. Saw this tip on advanblack tourpack install video. Good video bro. Thank you!

@jamestijerina2787 3 жыл бұрын

I appreciate that man. I'll have to check that out.

@BoringFisherman 3 жыл бұрын

Thanks for the informative video. Looking at updating mine on my 02. Thanks

@rodneyhanbaum697 4 жыл бұрын

Looks great, ordered a king pack a week ago!

@dennism103 5 жыл бұрын

Thx for choosing Harley Davidson

@m.b4524 4 жыл бұрын

Thanks for your time bud nice bike

@Abeguzman 3 жыл бұрын

Hey James! Thx for the video... loved the helmet part!

@jamestijerina2787 3 жыл бұрын

I appreciate it.

@robertnichols7251 3 жыл бұрын

You can put the 2014 bags on a 2013. You just have to make a small modification to your front brackets for your bag.

@jamestijerina2787 3 жыл бұрын

Thanks for that.

@phillipbrooks6919 10 ай бұрын

Thank you for sharing your video bro it helps me a lot

@Dave-zy6de Жыл бұрын

Nice CVO Street Glide! Beautiful colors.

@jamestijerina2787 Жыл бұрын

I appreciate it. Looks a little different now. I need to post an updated video of the changes I made.same color just bagger look.

@michaelhagen76 3 жыл бұрын

Nice job great video 🇨🇦

@GERRYMALONEY47 5 жыл бұрын

First of all what I noticed has the good points it looks very good on a bike I guarantee you got a very good price on it and the video you did is both informative and well done you showed all little problem areas that I would have been worried about the one bad thing I think about this tour Pak you have it on a steel plate with four washers on top that is not the strongest way possible to mount that pack I would have definitely used to steel plate I would have put the plate underneath the liner and put the bolts and washers through the liner you would have had a much more Firm Mount right now if that tour-pak bumps into something I'm worried those bolts will rip out of the tour pack other than that I think you did a fucking great job and those mounts are a little tricky they make them tight so they fit good they will work in for you have a great day nice job

@jamestijerina2787 5 жыл бұрын

I appreciate the input. Yeh I was going to order that plate and never got around to it. I guess I need to quit procrastinating. As far as that mount I was hoping it would fit because their is a different style for the 2012 model and I went with the 2014 style and it fits. Glad I could assist you in answering some questions and thanks for the knowledge.

@maxcarr1516 5 жыл бұрын

Great music choice bud

@mkb3580 3 ай бұрын

Looks good man…bless you!!!

@phillipbrooks6919 10 ай бұрын

That's a really nice looking bike brother keep up the good work💯👍🏼😎

@jayneitz7787 3 жыл бұрын

Good video man thanks for sharing

@andrewminicozzi1634 5 жыл бұрын

Good information. Thanks for posting.

@angelaonealaon 5 жыл бұрын

you need to put a plate in the inside

@aquahombre 5 жыл бұрын

When you were installing the bracket for the tourpak, did you try adjusting the screw on the docking hardware? I had a similar problem with my 012 road king luggage rack.

@jamestijerina2787 5 жыл бұрын

No I didn't. I wasnt aware it would adjust. I thought the screw just held clamp on but I will try that. I dont plan on removing it often at all but I will still try that for when I do. Thanks for the tip.

@JoseVazquez-gj8oy 5 жыл бұрын

What screw exactly are you referring to? And did it help with the fitment. I plan on ordering this package for a 2011 Street Glide as a gift for my fiance. Any help would be appreciated before I purchase it. Thank you

@aquahombre 5 жыл бұрын

The screw on the docking hardware that is attached to the rear fender. My was too tight, which compressed the rubber grommet where my luggage rack attached. I just loosened it a tiny bit.

@Mr47Mc 4 жыл бұрын

Nice video really helpful man

@jamestijerina2787 4 жыл бұрын

Thanks. I appreciate it.

@ascencionbarrera691 4 жыл бұрын

Liked your video, I have a question about the hinge set up on your saddle bag. Mine hit my tour pack when opened. The hinge you have, that you lift then slide out and fold down would work for me, but I can't find them. Can you share where you got them?

@jamestijerina2787 4 жыл бұрын

I believe that hinge comes on the 2013 and lower harley hard bags. The 2014 and up doesn't slide out and down, it comes up and out. I'm not 100% sure on that but the research I did when purchasing that's what I seen.

@ascencionbarrera691 4 жыл бұрын

@@jamestijerina2787 Thank you Sir.

@ricklong5381 4 жыл бұрын

What brand tour pack did u purchase

@LilDead_107Hoover 2 жыл бұрын

Just the video I was looking for. We must be the only people with a 2012 Street Glide.

@jamestijerina2787 2 жыл бұрын

Lol. Yeh everyone has14 and up seems like. Glad it could help.

@Dinoxt12 5 жыл бұрын

Thanks good job.

@richardmcmillan533 9 ай бұрын

I thought I found a vid saying they used a '09-'13 mounting bracket and the '14^ Tour Pak?

@shandyfebiarisma3408 4 жыл бұрын

So its possible to install on old harley like on 06 ultra classic but need a little work on detach plate only?

@jamestijerina2787 4 жыл бұрын

I'm sure the box would fit but I would get the attachment for your year model. If you need some measurements offline let me know.

@phillipbrooks6919 10 ай бұрын

Did you do a fender extension in the rear or does it come like that

@jamestijerina2787 10 ай бұрын

The 2012 cvo came like that. I know have a 7 down 14 out kit from redfox bagger. Advan black.i think it is sells extensions for fenders to.look like that

@angelgarza7994 3 жыл бұрын

What kinda of seat is that?

@jeffrobinson1184 Жыл бұрын

Was watching your video… do you still have your 2012 CVO SG?… i’m trying to get exact specifications on where to put the Screamin eagle gas tank badges on and I thought if you were willing to do some measurements and photos with some precise measurements, I would gladly send you some cash for the favor. Seriously!…thank you!… I want to make sure they are in the exact position because they’re $250 for a pair of them and it’s a one time deal obviously!… thanks again…

@wilkesjeff 5 жыл бұрын

I watched this to see do u have trouble with the latches or release buttons and u did! Mine is hard to mount. I’m wondering would it be a major issue If I removed the rubber sleeves on the mounting hardware. I’m sure it would make it easier to mount. Just a thought

@jamestijerina2787 5 жыл бұрын

I'm not sure. It would be a start. I used some sand it didn't help much. Ki d of like it that way because it wont come up missing and I dont plan to take it off to often, but if you do that let me know how it works.

@wilkesjeff 5 жыл бұрын

I’ll let u know what I come up with!

@LukePierce333 5 жыл бұрын

Mine are the same way, and it’s because the bracket is too narrow. If you spread the bracket while you’re trying to attach it it helps mine a lot (YMMV)

@jamestijerina2787 5 жыл бұрын

I appreciate that. I'll try that next chance I get and see if it doesn't help it out. @@LukePierce333

@jmahan1928 5 жыл бұрын

FYI, this may resolve the rubber sleeve, hard to mount issue? Those rubber sleeves are not perfectly round. They are designed that way to assist with a firm mount once latched. Those rubber sleeves as you call them have a line scribed on them. That line should face the opening of the latching mechanism so when the latching mechanism rotates to latch it's solid. If these sleeves aren't lined up correctly it's similar to putting a square peg into a round hole. Hope this makes sense and helps.

@nathanizotic1757 3 жыл бұрын

Do u think I could snag one of them for my 2010 Street Glide CVO?.. I’m tryna find a tour pack for my ol lady and I’m going through hell and high water to find one. I got a crazy blue color so I’m gonna have to buff prime and paint whatever your pack I get regardless..

@jamestijerina2787 3 жыл бұрын

Yesr i don't see why not. You might consider your year model mounting bracket if you want it to release quickly.

@1nateaber 4 жыл бұрын

Very nice bike 👍🏻

@johnfischer8615 4 жыл бұрын

The mounting studs you are connecting to, are oblong. If you look at them closely they have arrows. Turn these a bit and the bracket will just slide on with no effort.

@jamestijerina2787 4 жыл бұрын

I appreciate that. I'll have to look at and try it.

@edub1811 4 жыл бұрын

what year did you order for the 4 point docking system

@jamestijerina2787 4 жыл бұрын

I would say around June, July 2019

@dennism103 5 жыл бұрын

U saved a ton of $$$$$

@steventhomas1878 5 жыл бұрын

Thanks for posting. Link for purchasing please and thank you.

@jamestijerina2787 5 жыл бұрын

So far its holding up. I haven't made any long trips yet loaded down. I have hauled a case of beer in it numerous times across town and seems to be doing fine.

@dansklenicka8403 3 жыл бұрын

Bless You !

@mlucasGrindstone 5 жыл бұрын

Was the light bar extra? Where did you get it?

@jamestijerina2787 5 жыл бұрын

No light bar on this pack.

@bjdulin2669 Жыл бұрын

😊😊😊 that 05/06 1k looks good in the background

@jamestijerina2787 Жыл бұрын

I appreciate it. Got rid of it about 3 months ago. Did alot of sitting after I got the harley but it was a good fun bike.

@bjdulin2669 Жыл бұрын

@@jamestijerina2787 I got a 06 same color scheme Brock’s exhaust sittin bout 62-64 inches! Love it man but my streetglide way more comfortable 😂😂😂

@jamestijerina2787 Жыл бұрын

@bjdulin2669 I hear ya there. Mine too. Plus that radio better than headphones 🎧 lol.

@hdrolling 4 жыл бұрын

Perfect, I have one coming Sat for my 2010.

@jamestijerina2787 4 жыл бұрын

I hope it works for you, I love mine.

@jamestijerina2787 4 жыл бұрын

How did it turn out for you so far?

@hdrolling 4 жыл бұрын

@@jamestijerina2787 Mine is perfect, I added the plate inside so it's more secure and added a blue stitched advanblack tour pack liner. Swapped out the cheap tether for an advanblack tether as well. Looks and fits great on my 2010.

@jamestijerina2787 4 жыл бұрын

@@hdrolling nice. Sounds like I need to upgrade mine with the plate. I seen the advan insert and been debating but you may have convinced me. Lol. Appreciate the input.

@hdrolling 4 жыл бұрын

@@jamestijerina2787 I was surprised at how expensive the pates were but worth it I suppose. The liners really make the inside of the pack look nice, I installed the saddle bag liners after seeing how well the tour pack liner was made. www.amazon.com/gp/product/B082FSHXX1/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

@travis67 5 жыл бұрын

Looking at the the same tour pack are you still pleased with it? thanks for posting.great looking ride.

@jamestijerina2787 5 жыл бұрын

Yes I am. I haven't been on any long rides but as far as around surrounding towns it works out great. It's really convenient and holding up well so far.

@Keith63060 Жыл бұрын

Nice video and beautiful bike..I have a cvo 2010 tequila sunrise

@jamestijerina2787 Жыл бұрын

Ohh nice. I've done more work to it now. I have a 26 front wheel and 7 down 14 out bags on the back.

@Keith63060 Жыл бұрын

@@jamestijerina2787 WhoW........ 💯

@sargefreeman5109 4 жыл бұрын

Is the tour pak the TCMT brand or the SLMOTO brand?

@thebasswicker6294 3 жыл бұрын

Also how is the pack holding up

@ronstidham1 3 жыл бұрын

Do u think the 2013 bracket would work with the 2014 and up tour pack? because I to would like the 2014 and up model on my 2011 street glide

@jamestijerina2787 3 жыл бұрын

I think it would. I believe the main difference was the older model bracket had forward/back adj holes every 1/4 inch or so to where the newer one has one log adj. Hoke about an 1 inch long so you can slide it to adj. With loosening the bolts rather than taking rhem all the way out and put in a different hole

@ronstidham1 3 жыл бұрын

@@jamestijerina2787 thanks,man I'm going to go with what u did 💯 seems to work fine

@jamestijerina2787 3 жыл бұрын

@@ronstidham1 awesome 👌. Mine is still holding/working/ looking good. Hope you like it on your bike.

@71donkrider 2 жыл бұрын

Good video from 2 years ago

@sprezzatura8755 Жыл бұрын

Perfect for pizza delivery.

@billytaylor7900 4 жыл бұрын

can you past the amazon part number please

@treyivey5431 3 жыл бұрын

The plastic clips that hold it to the docking system cracked on mine

@jamestijerina2787 3 жыл бұрын

I'm sorry to hear that. I've put mine on about 3 times (the first tapping it with a hammer to close) and I don't think mine are cracked(knock on wood)

@dennism103 5 жыл бұрын

I bought a tour pack from ebay it's ok has a few holes 4 to be exact for weird accessories speakers etc. I gotta do some DIY bodywork. I can't complain for the price $328. Free shipping hd wanted close to $2,000.!!! No fkn way!

@jamestijerina2787 5 жыл бұрын

I agree. The Harley ones are overpriced.

@lexxonadventures8755 5 жыл бұрын

Do you have the chopped or razor tour pack? The link you added was a razor but the one you have looks bigger

@jamestijerina2787 5 жыл бұрын

I have a razor. I thought about buying a chopped for long trips but most time its just short trips and I like the look of the razor better. There is a smaller on than the razor called a pizza cutter/carrier I believe but that's too small for me. I can give you exact measurements Saturday if you would like.

@lexxonadventures8755 5 жыл бұрын

James Tijerina thanks. I ordered the same one you got. Looks good

@jamestijerina2787 5 жыл бұрын

I hope you enjoy it as much as I do mine. Let me know how it turns out. @@lexxonadventures8755

@lexxonadventures8755 5 жыл бұрын

James how do you measure where to drill for the backrest?

@jamestijerina2787 5 жыл бұрын

@@lexxonadventures8755 mine had predrilled holes for the backrest and the retractable string for opening, so all I had to do was put the nuts/caps on.

@terryandteresa 4 жыл бұрын

Sub # 253! Great channel bro!!

@13thSwarde 10 ай бұрын

You can order a lock matched to your Harley from the dealership and replace the lock that came with the tour pack.

@jamestijerina2787 10 ай бұрын

I'm not sure. You may have to order a new set of 3 and redo them all at once.

@13thSwarde 10 ай бұрын

I purchased two key locks from my dealership, to replace the ones in a set of saddle bags I installed on my Harley Fatboy. I gave the dealer my VIN code, and the key locks were ordered, they worked great.@@jamestijerina2787

@writer312 3 жыл бұрын

Looks good brother. What was they nut n bolts you had to get?

@jamestijerina2787 3 жыл бұрын

Got them from a local hardware store. The washers were fender washers

@writer312 3 жыл бұрын

@@jamestijerina2787 ok, what size?

@jamestijerina2787 3 жыл бұрын

@@writer312 I belive around 1/4" or like an M6

@dennism103 5 жыл бұрын

I think those are made in china? Not bad for the price...

@joe305f4 4 жыл бұрын

Where you get the rim from

@jamestijerina2787 4 жыл бұрын

Came stock on 2012 CVO

@JoseVazquez-gj8oy 5 жыл бұрын

How is the quality of the plastic on the pak? Many reviews say it is cheap plastic and breaks easily.

@sire45 5 жыл бұрын

Jose Vazquez Super thin plastic. It cracks if you look at it too hard. Lol. Seriously, it’s really thin.

@Walt450 2 жыл бұрын

For that price if it cracks just replace it

@sixwheelcarlisle8491 2 жыл бұрын

Wonder if this would fit on a 2010 deluxe 🤔

@jamestijerina2787 2 жыл бұрын

Not sure on that. If you need some measurements let me know and I can get some for you.

@sixwheelcarlisle8491 2 жыл бұрын

@@jamestijerina2787 what are the measurements between the bracket legs left to right and the measurement between the right side to mounting slots? Wondering if it will fit right into the sissy bar quick connect spools I have on my Deluxe. 🤓😁 Thank you and stay safe 😎

@jamestijerina2787 2 жыл бұрын

@@sixwheelcarlisle8491 left to right outside to outside 10" metal is 1/8" thick. My mounting points front to back on center are about 5 3/4"

@sixwheelcarlisle8491 2 жыл бұрын

@@jamestijerina2787 Thank you🤓 I’m measuring my quick detach sissy bar/ back rest and that would not work for my 2010 Harley Davidson Deluxe, it measures 9 1/4” on center of either side and 9 3/4” left to right. Thank you again for your time👍🏻👍🏻

@jamestijerina2787 2 жыл бұрын

@@sixwheelcarlisle8491 yeh too far off. No prob. Glad I could save you some time and heartache lol.

@joeyblazik7990 3 жыл бұрын

I just would like it see a video on how to remove one properly.

@jamestijerina2787 3 жыл бұрын

I'll see if I can make a short video rhis weekend.

@joeyblazik7990 3 жыл бұрын

@@jamestijerina2787 Thanks James I just got this 1996 Ultra Classic

@dennism103 5 жыл бұрын

They are hard to latch alright

@dawsen7161 4 жыл бұрын

Hey I hear Aaron Lewis in the background!!!

@rjuarez4913 3 жыл бұрын

A table would have been nice for unboxing huh!

@Cabron692006 4 жыл бұрын

You coulde’ve just bought the right mount for the year of your bike 🤦🏻‍♂️🤷🏻‍♂️. The tour pack doesnt matter the year, it just get screwed on tho the mount.

@jamestijerina2787 4 жыл бұрын

This mount has like an inch to slide back and forth to where as my year model mount had like 4-6 holes for adjustment. No sliding for adjustment. That's why I went with this one.

@fatboysflstbs Жыл бұрын

DER.?

@dennism103 5 жыл бұрын

I ride a black road king.

@Jerk_ANC 5 жыл бұрын

That should have a plate on the inside of the tour pack

@jamestijerina2787 5 жыл бұрын

I mentioned that at 7:55. The plates I seen were flat and unless they are indented/raised about 1 inch circle around the bolt holes to form like the plastic, using big washers will do the same thing.

@Jerk_ANC 5 жыл бұрын

@@jamestijerina2787 cool. Just wanted to let you kno. Good video by the way. Thanks

@jamestijerina2787 5 жыл бұрын

@@Jerk_ANC Thanks for knowledge. I may try a plate later. I'll see how this holds up and go from here. Appreciate it.

@bobberguy1 5 жыл бұрын

@@jamestijerina2787 The metal base plate is to take weight off the bottom of trunk. If you don't haul a 30 pack or anything real heavy, you'll be fine. The aftermarket plastic won't hold the weight of oem fiberglass. I have the same trunk and well pleased for the price. God Bless Texas!

@jamestijerina2787 5 жыл бұрын

@@bobberguy1 Thank you for that bit of info. I wasn't aware it was for weight. Thought about putting luggage rack on top. I'd I do I will put a plate on it. Appreciate it.

@crash5309 5 жыл бұрын

Not to be funny man but why would you do all that work for the small box...kinda doesnt seem worth it....just asking....again not to be funny or shitty...i have a full size box and love the storage...be cool....rubber down....

@jamestijerina2787 5 жыл бұрын

I would like to get a bigger box. Like the look of this a whole lot more. I like the bagger look more than the touring so just my preference.if this one holds up well I'll get a bigger one for long road trips.

@snakebite6511 2 жыл бұрын

Typical cheap Amazon shit. I will never understand why people buy a Harley, then cheapen the bike by putting bargain basement crap on it. To each their own but not for me