Tow Bar Install - Volvo XC60 2017 onwards

No video

Tow Bar Install - Volvo XC60 2017 onwards - Step by Step

Рет қаралды 9,618

Күн бұрын

TowBar Installation on a Volvo XC60 2017 onwards. This install should be similar on most of the Volvo range? This is a step by step video and should show all you need to know to install a tow bar, and although this is a flange type the detachable version is the basic same process.
The wiring install for the earlier XC60 model including bypass relay can be found here: • Tow Bar Install - Volv... The process is basically the same as on the newer models. A wiring video for the newer models will follow.
The tow bar kit including the bypass electrics supplied Towbars Direct on Ebay. I have included a links to all the parts below.
🛠 TOWBAR AND ASSOCIATED EQUIPMENT 🛠
Volvo XC60 Tow Bar (Detchable Swan Neck Type): ebay.us/FdT74v
Volvo XC60 TowBar (Flange Type): ebay.us/iW9QMx
TEB7AS Bypass Relay: ebay.us/IaDGZR
7 Pin Towbar Wiring Electrics kit for Volvo XC60 2017 on: ebay.us/9HSWAY
13 Pin Towbar Wiring Electrics kit for Volvo XC60 2017 on: ebay.us/A51qDa
Copperslip Anti Sieze Grease 500g: ebay.us/Q0S9O8
Action Can Multi-purpose Lubricant, AC-90, Twin Spray LPG, 500ML: ebay.us/soF8js
Please make sure the item you are ordering is the correct one for your make, model and year of vehicle.
These are affiliate links, so I will make a small amount at No extra cost to you. If you decide to purchase. Thank you.
----------------------
I hope you find this video interesting. If you have any questions please let me know in the comments.
If you did enjoy this video and please hit the "like button", it would be greatly appreciated. Thank you.
----------------------
You may also enjoy watching these videos:
Full restoration of an old woodworking vice: • Amazing - Vintage Reco...
DIY wooden car ramps with a few extras: • Is this too much - DIY...
Welding up a corroded & leaking LR3 air reservoir tank: • LandRover Special Prog...
HDC Fault and Fix Land Rover Discovery 3 & 4: • HDC Fault and Fix Land...
• Restoration of an old ... - Photo montage restoration of an old Genie Cherry Picker.
----------------------
Thanks for visiting.
#TowBar #Volvo #Electrics

Пікірлер: 10

@EverydayWorkshop Жыл бұрын

I hope you find this video useful, if you have any questions please let me know in the comments. I would really appreciate a 👍 and your subscription if you did. Thank you. You can find the full playlist of all the Volvo Maintenance videos here: kzfaq.info/sun/PLlryvotrcqlTAxB2ApBysoAxy0A-nSn1x

@robertxxl4494 Жыл бұрын

Das wideo ist sehr gut gemacht, und selbsterklärend. Wurde gerne sehen das ganze Elektro Anschluss

@EverydayWorkshop Жыл бұрын

Thank you Robert, I will try and post the electrical video soon. If you would like to keep a look out for it. Glad you enjoyed it. 😊👍

@matsandersen897 Ай бұрын

@@EverydayWorkshop Do you posted the video of connecting electric wiring inside...

@watlyle 7 ай бұрын

There is a better hitch manufactured by a company called stealth hitches. Their hitch allows reinstallation of the stock bumper reinforcement bar in addition to the hitch which gives extra security and preserves your warranty.

@Richard1977 Жыл бұрын

Anti-seize on the original inner bumper bolts reduces friction on the bolts. So they will come undone and tightening them to the required torque is a bit pointless. Appling anti-seize afterwards is not a problem. I usually let things as they are and let them age the way "God intended". And what's up with you Brits not buying the dedicated wiring harness? This is just waiting for problems. Us Dutch are known for being cheap but we do buy and use the dedicated wiring harness. Except for that it's a great video.

@EverydayWorkshop Жыл бұрын

Hi Richard, well I’m a Yorkshireman and don’t like spending my money. The dedicated harness is considerably more expensive, and this setup makes a good video. I will agree with you the the Anti sieze may affect it but it isn’t a lubricant. Also I’ve fitted locking devices in the form of nylock nuts and spring washers on the set screws (bolts), I’m very confident they are tight enough. From somebody who’s been an engineer for a lot of years now, I always thank the person who took the trouble to use some anti sieze when I disassemble something. Really pleased you like the video thank you. 😊👍

@neonalon 5 ай бұрын

Usually anti seize reduces thread friction and it will increase the pretension of the bolt. I would not worry for a bolted connection like this, it is way stronger than needed anyway.

@Tom-uk6zo 2 ай бұрын

Great video. What's the brand/model of the Tow Bar?

@EverydayWorkshop 2 ай бұрын

Hi Tom, it’s a TowTrust towbar. This is a link to an unboxing review: kzfaq.info/get/bejne/kJqAiZRz39jaeqM.html. Also if the you check either video description there is a link to the towbar from the supplier I bought mine. Hope this helps. 🙂👍