Intake manifold amzn.to/48DK9OP 2jz vvti gear amzn.to/3u6UC6c Gates racing timing belt amzn.to/4aWVZVI Aluminum paint amzn.to/492sFeU Clear coat amzn.to/48Wkpg8
Пікірлер: 38
@adrianortiz44697 ай бұрын
Awesome Content as usual!
@BoBuilds7 ай бұрын
Thank you!
@nickmanchesi47956 ай бұрын
So the valve covers bolt on no mods? I thought one bolt doesn’t line up?
@chrisstackalot16806 ай бұрын
Do you build engine for others too?
@turbogears9007 ай бұрын
Great job
@BoBuilds7 ай бұрын
Thank you 🙏
@nanaydrider97856 ай бұрын
good jo sir
@BoBuilds6 ай бұрын
Thank you
@mikearceneauxbaker7 ай бұрын
Also when I do the seals my plan is to use the rope method then once I'm done bring the crane back around clockwise to TDC . Then run through the torque sequence on the cams until they are at TDC ...then I should be able to put belt back in and be good . Correct ?
@virgiliacarcallas54186 ай бұрын
Thank You 6 😢🎉😂 0:49
@GracelessGarage7 ай бұрын
Gaskets used in-between exhaust manifold and cylinder head are likely going to blow out. I would run OEM Toyota MLS or aftermarket MLS gaskets instead.
@BoBuilds7 ай бұрын
Thanks for the tip!
@1411MEDIA7 ай бұрын
Good shit dude
@BoBuilds7 ай бұрын
Thanks 🙏
@mikearceneauxbaker7 ай бұрын
Very nice. For the valve seals I Just got some from gsc but they are all the same size. I heard that the exhaust ones are supposed to be slightly bigger ?
@BoBuilds7 ай бұрын
Yeah the intake and exhaust valve stems have different part numbers, I couldn’t even tell a difference by looking at them. I did notice some companies will sell the whole set as if they are all the same, fell pro surprisingly sells the set and has them labeled intake and exhaust. Honestly I think it will be fine they are all the same size
@anthonyboria57384 ай бұрын
Where did u source this 2jzgte Block from ? And did u say it's new?
@BoBuilds4 ай бұрын
Brand new from Toyota
@BoBuilds4 ай бұрын
A Toyota dealership cab order one for you
@804MRMAN7 ай бұрын
I need to get a job at Toyota or Lexus if they let me do all of this to my car 😂
@BoBuilds7 ай бұрын
That employee pricing on parts helps too 😅
@804MRMAN7 ай бұрын
@@BoBuilds I'm jealous 😏 Lol
@Sam-wr5wz7 ай бұрын
It seems like you know what you’re doing, you should be a mechanic
@BoBuilds7 ай бұрын
One day ☺️
@Animestuffidk7 ай бұрын
No kidding
@MrOG3Drew7 ай бұрын
Bro I care. Also did you end up painting the block?
@BoBuilds7 ай бұрын
Lol thanks bro, so the block came in the original black paint all I did was clear coat over the factory coating. It’s super glossy and more durable
@MrOG3Drew7 ай бұрын
@@BoBuilds I got a block coming in from Toyota soon too. Keep the videos going. Interested to see how your build turns out.
@BoBuilds7 ай бұрын
@theallrounder1000 no way, when I ordered mine there was like 4 left in the country, did you order the 98 version? I believe it’s the only year pre tapped for the VVTI
@MrOG3Drew7 ай бұрын
@@BoBuilds it’s the same part number but I’ve been a while. I’ll know when I get it I guess
@MrOG3Drew7 ай бұрын
I just got the block in. I think since it was newly produced, they all come tapped for vvti
@richardknight12587 ай бұрын
I could swore you said the head was sent to a machine shop..if so that's was piss poor.