Love all the hacks and tips. Your lil helper is adorable! Keep up the great work!! Your videos are awesome!!

Just got back from the gym and seen you have a new video! Immediately I sat down with an adult beverage and enjoyed your knowledge of vehicles! Thanks to you and your little Viking! Much love from AZ! 🇺🇸

Thank you!!! Didn't know about the tubes getting clogged, super helpful. Little man is ready to wrench! 😂😂 Can't wait for the next vid 🙏🙏🙏

Ever since I watched your pedal commander video, I've been hesitant on getting it ever since. But I've had it for a few months now. No issues! I love this thing

I use foam window or door weatherstripping on my licence plate. A strip along the top and bottom of the plate. Works perfect. Looking forward to the new rig!!

Great job. Can’t wait to see your new ride.

Thanks for sharing, I was like crazy looking for where that rattling in the back door comes from and I finally found it thanks to you.💯💯💯💯👍👍👍👍

Great video and outstanding practical info VG!!! And congrats on the new hire (mechanics these days...they're getting younger and younger).

This video is GOLD. You are a Saint!

Thank you sir, great video! God bless you!

Great tips! One suggestion - you can put the tape on the back of the plate instead of putting the tape on the trucks paint.

well done and thanks👍

I got a TPU cover for the tag. Fits on super tight and stops the rattling, even with my Sundown 12” sub in the back.

My main noisemaker was the front wheel well splash guards. At hwy speed, they made a racket. It wasn't cheap, but worth it to replace them with Ark splash guards. They run silent now.

Extending your A/C drain line helps with keeping your frame clean from corrosion in that area.

Great vid with your boy helping you ! I'm going to lube the hatch latch so it doesn't rust...i'm in the rust belt too! New T4R coming ???

Great again.

What’s the noise that comes from top right side of engine when ac is on. Sounds like a fluid pump or something . Any info would be great

? 2018 4Runner squeaking noise (like springs) rear end was told it was not shocks. Noise stopped…but came back after I had my breaks done.

You have to be the nicest guy in NJ

I have a 5th gen 4runner and found that the 2 rubber bumpers under the hood are adjustable, they thread in or out to help tension the hood.

I'd like to lubricate the suspension components and bushings. I've seen lithium grease being used and a product called AT 205 Re-Seal. Can you recommend anything? Thanks

This is a great channel and I am a new subscriber who owns a 2012 4Runner with 130,000 miles. It is the best vehicle I have ever owned! I have a question, is a bypass oil filter a good idea?

What’s a good OEM source for the cabin air filter? I’m seeing all sorts of part numbers online.

Anyone else have a rattle/noise coming from the left side maybe dash area or firewall? Its driving me crazy. Has to be something the wind is making move/rattle while driving.

Any recommendations on settings for a proper alignment, on a 4Runner in stock form. Toyota Dealership is super expensive but also don't want to risk it with a local inexperienced tire shop.

What would be a good vacuum to use besides a shopvac if we don't have one.

I have a Toyota Tacoma 2023 is it hard to install the tailgate remote lock from Toyota thanks

I have a brand new 2024 4Runner TRD ORP with KDSS. Intermittent sound like a baby rattle under the armrest when turning. Any ideas?

For the license plate you can buy a silicone plate spacer, it’s pretty much a slab of silicone that is the size of the plate and I think they’re like $8

Where did you get your backseat protectors from?

Question for you. I know it will be difficult to answer but i trust your thoughts. 22 SR5, I had an Eibach lift 2.75 in front and 1 inch in back. I also added Toyo 33's. Literally the day i got the work done I hear what I best can describe as a rubbing noise. I removed the mud flaps and shaved the front a little. Noise does not go away and I see no indication of rubbing. Sometime I hear it going straight so that in theory should remove the the whole rubbing issue. it happens with a slight turn and sometimes going straight 1-3 miles per hour and then gone. I am mechanically inclined but I am absolutely stumped. I am a subscriber of yours and would appreciate any advice or thoughts. CV Axle? Sincerely appreciate it

can you hear the fuel pump when the car is running if you are right where the tank and skid plate is ?

Are the headlight on a 4Runner a nightmare to change like on a Prius?

how did the hardware inside the rear hatch get rusty?

Any tips to fix a squeaky door panel armrest in the 4runner?

I feel silly asking this if it has been answered. Recently purchased ‘20 4Runner TRD Pro. Once I hit 40-50 mph, I get a strange vibration noise from the steering wheel…left side to be exact. Sounds kinda like it’s from the front, no clue if someone has found a solution.

Great tips, thanks! With the deposit already put down, does this mean that JP gets the red 4Runner now? He's outgrown the yellow Vette, right? Fasten your seatbelt, Paul, it's going to be a super-fast 16 years! They'll be gone before you know it. Ask me how I know. :))

if you use reusable zip ties, it would be easily undone for the spare tire.

I fell for you guys who live in the Rust Belt.

No joke about the rodents...Living in Florida, I had my wire harness chewed by rodents when the temps dropped into the forties. Dealership told me it was common because the wires are made with a soy based material and when it gets cold, they look for warm areas and while there, they start munching. Luckily it was covered by my insurance.

Bonus, the rubber flaps next to the wheels in the front (on the engine bay sides) can rattle. Putting a small cabletie under the plastic clips will make it tighter and stop rattling. Was an issue with my 2023 10 month old 4Runner

Great tips, wrote them down…trying to get 300k out of my ORP, maybe more…

Why not just take the bracket off and flip it? Seems like adding Tape is just a bandaid

Why the hell it so corrosive

I think you're supposed to put the tape on the license plate and not your paint.

Noises caused by rust