Thanks so much! Worked on our 2007 Solara. SUMMARY: 1. Get in, close door. Insert and withdraw Master Key 5X; 5th time leave key in. 2. Open and close driver door 6X. 3. Remove Master Key; Insert new key and wait 60 sec until security lite goes off. 4. Remove new key; insert Master Key and start car [not sure if this step is necessary. 5. Turn off car and new key should be programmed! NOTE--there are different sequences for different Toyotas. For The REMOTE On The 2007 Solara/Camry [and others]: 1. With Door OPEN, insert Master Key in ignition and withdraw 2X 2. With key remaining OUT, close and open the driver door 2X; 3. Insert key and remove. 4. Close then open driver door 2X; insert key; close door 5. Turn ignition to 2 clicks to ON [not start] then off and remove. 6. Power locks should lock then unlock automatically 7. Press the lock and unlock buttons on the remote simultaneously for 1.5 secs. 8. Immediately press and hold the lock button on remote for 2 sec. 9. Doors should lock and unlock once = success. If lock/unlock cycles 2X, then repeat steps 7 and 8 again. "There It Is"

Thank you for posting this. This procedure worked on my 2003 Land Cruiser when all others failed.

Lots of thanks for your detailed procedures. Your steps in this video works successfully. Works with 04 Camry.

actual video starts @ 08:40 thank me later on !

For the impatient: 1) Buy and cut your new transponder key 2) Start at 8:06 for the instructions: 3) Put master key in and out 5 times, keep in on 5th time 4) Open and close door 6 times 5) Put in new key 6) Wait 60 seconds / until red security light on dashboard stop flashing 7) Remove new key 6) Start engine with OLD key for 5+ seconds 7) Car will start with NEW key now.

There are several different sets of instructions to program these keys published on line. I tried 5 unsuccessfully before finding this which worked great on my 2007 Solara. THANKS BROCK.

tryed it several times,sec light never comes on steady after master is pulled 5 times 2009 camry

Great video - Thanks for all details. All information is useful.

This procedure worked on my 2010 Scion tC thank you

Is it the same for programing the key with the built in remote

Worked perfect first time. Thanks

I've seen several of these and it's pretty much the same but won't work on my 05 tacoma, I was able to do two remote fobs but not the transponder key

Very good explanation, will this work with a 2008 Toyota Avalon? I have the key with the built in fob.

Thanks ! I did it the first time! 👍🏽

Thank you so much for uploading! An auto locksmith near me wanted to charge $50 to program an extra key I had bought for my mom's car but with your video I was able to DIY it and save haha

Very good video any body can easily understand this video the way you explained thank you

Only works for older non-smartkey cars which would automatically unlock as soon as he pulled the door handle. The physical key only work for doors, glove-box and trunk but not ignition mode as shown. Actually XSE is the best model. Pretty rare model but I still like my plain old SE with JBL, etc. P.S. - If you press and hold the start button without your foot on the brake then will not only light up the navigation/audio and clock in the accessory mode but start AC and look like it does with a mechanical key with the whole panel lit up as in ignition mode only not start the engine. Oh, the things you lean by accident. This trick will become useful in summer for pre-cooling the car.

Thank you dude.. is the light still blinking? Info starts at the nine minute mark.

Thank you . You saved me a lot of money.

My 2010 dot key remote stopped working. The security light remains on when I insert the key but it still starts the car.

Did work on my 2010 Toyota Camry Altise "dot" key

Please help, I did the steps on a 2010 RAV4 and the security light doesn't stay on after step 3. Is there a time table or something? Please I really need help.

Will this work on 2007 and 2011 Camry? I think 2006 is the cut off but not sure.

With Toyota's depending on the generations but this one in particular has 2 different chipped keys. If it doesn't work you possibly bought the wrong chip key , I believe it's the D dot chip key and G chip key.

Programming start at 8:43

This worked on my 2005 Toyota Highlander. You can skip to 9:00min to see the process.

A bit lengthy, still awesome, Thank you.

great video thanks to the author of this movie

it is really great thanks alot

Will this work without the master key? I lost my key!

Do you know if the procedure is the same for Toyota highlander 2008 ? Let me know please,thanks

hey what's the part number or FCC ID of that remote. My Camry has the integrated key remote that I dislike and was wondering if I could use that remote type instead

I only have one key for my camry. My key doesnt have any dots. Can i still program a new key?

How did you know what keys to purchase? Obviously it’s a 07 Camry with the dot in key is there anything else that makes a difference. Where did you get you key cut?

Does this apply to Camry 2013 model?

Hello Mr. Adams I followed your video step by step, everything is working except the security light never stopped. I did several times, same scenario. What am I doing wrong? I have 2007 Toyota Camry, bought uncut keys and took care of the keys through Ace Hardware. Security blinker keep continued for over 3 minutes. Again everything working except the engine does not turn on. Please advise. Thanks

very helpful

i want to ask is it can be done for my estima earas 2004.

how to setup crown grs 182 remote/2005 please

Thank you!

excellent video. worked 1st time. you saved me a lot of money. thank you.

Will this work for 2009 Camry with the remote buttons?

Does it work for Mitsubishi Galant 2003?

bro i cant put my car to the programming mode can u help me with it???

Not working for Camry 2009 LE. Tried many times! Any suggestion...

good job bro )

Will this work for my scion frs

desde venezuela, este metodo me funciono en un toyota yaris spot 2007

how do you programmer 3rd key if i buy 2 extra new keys? anyone know answer me Please... Thanks

I have a 2006 X-SP Tundra this does not work, anyone know of any other processes?

Good job

will this procedures work for 2003 camry?

Does this work for a 2006 corolla

I cannot do this way on my Toyota Camry 2008. Does anyone know how to program transponder in my car?

Didn't work for camry 2008. Tried several times but the security light didn't stay on.

What specific software do I need to program the valet key for a 2009 Camry U.S built?? Do not reply with a generic answer - I need a company name, product number, model number, etc.

Need to make a comeback mate.

Superb

Will this work on my 1997? Camry?

How to programe remort of toyota camry 1998 thsnk you

Will this work with 07 Camry?

Is that the original remote? What year is that car?

Will this work on a 2005 Toyota Tacoma dbl cab truck..........and can it screw up my ignition so that my one and only key does not work anymore?...Thanks!

The Valet key doesn't open the trunk or the glug box.

Work with 2012 Camry?

We tried this but the security light will not turn on steady, it just stays dark. Didn't work for us. Our copy key has the same dot and is OEM. Tried this 6-7 times and won't program.

Ok everyone I have a problem lost the program key had one made without chip car won't start any one know how to start the car ??

What if I don't have the old key

Hi, will this work on 2014 Camry LE? Thanks for taking the time to help others in need.

Anyone know if it works on 2002 XLE??

How to program buttons

quiero programar la llave en una 4runner toyota 2000

The security light won't start the car

it doesn't work for corolla 2008LE

Worked with my 2007 Camry. No blinking security light so I just waited 60 seconds before removing the new key. Toyota dealer wanted $80 to do this- I did it in less than 5 minutes.

thanks, am in Nigeria,how and where can i buy a transponder chip key?

BTW it doesn't work for Camry 2016.

Instruction starts at 8:41 - all previous talk is for new people knowing nothing.

I tried these instructions 3 times and it didn't work on my car. 2007 Toyota Camry LE. After performing the steps the immobilizer light stays on in the video but it doesn't do that in my car. Any other suggestions? I also tried gas pedal + break pedal method and the key in ignition ON/OFF 5 times.

But good great video

Didnt work on my 2010 Camry any suggestions ?

I want Kia Carnival 2007

278 MECHANICS / TOYATO DEALERS DISLIKE THIS VIDEO. YOU'RE OFFICIALLY A PUBLIC ENEMIE.

This not gonna work for 2007 camry XE

This video/instruction definitely does not work for a 2006 Rav4,one would have thought all Toyotas are created equal?

What if the master key is lost and only have valet key (grey key) ???

Does NOT work on 2008 Corolla :O(

@ Seran, As per my knowledge, yes...

will this wor for a 2006 toyota corolla?

Hi, I lost the master key and I own only the valet key. Does this process can be made with the valet key the same way?

2006 Solara worked great

This did not work for my car do you have any other suggestions I tried several times

Doesn't work in 2009 camry...

Not working on 2012 Toyota Camry.

Wont work for 2009 Corolla LE :(

The car won't start 7:45

is not work with 2012 toyota camry se

HI LESNAR WOULD THIS STEPS WORK ON CAMRY 2012 I'M TRYING TO PROGRAMING A NEW KEY NEED HELP THANKS

You must have a master key. You can not make a copy of the transponder code from the VALET key. The valet key will not open the glove box AND YOU CAN NOT PROGRAM A NEW KEY FROM IT.

Thanks for the help but you sure over, over, over,over, over explained the whole thing.