Hey bud, Great video, wish I knew this 8 months ago. My pick up was blocked starved engine of oil. Welded 5,6,7&8 conrods to crank😭 394k on the clock. Enjoy your vids. Awesome work
@jamiecapewell59609 ай бұрын
Good advise, our workshop has been pulling sumps to check pickups for years, leaky seat washers is a sump off no questions asked. Blow by is exhaust soot, wet exhaust soot is nasty and loves your pickup!
@mrdoodle8748 Жыл бұрын
One of the first things I did when I got my 200 series with 105k on it. The mini sump is a pain to get off because Toyota use a bonding agent rather than a regular gasket. I didn't replace anything as everything looked ok but as you mention, having a look inside will tell what sort of life the engine has had.
@johnalmstrom1723 Жыл бұрын
Great advice. I did mine 2009 but no issues but better safe than sorry.
@ourredaustralia3557 Жыл бұрын
Is there anyone making aftermarket billet ones
@scottdoney69267 ай бұрын
All good BUT no manufacturer has stated in his service book to do this replacement, so what’s their problem with providing the replacement interval, Do they want it to fail,I’am thinking yes they don’t care also automatic transmission fill for life what a joke !! Don’t go to dealers they rip you off , they don’t care After market does such a better job every day !!
@lukedrakogiannskis838611 ай бұрын
I just changed mine thanks Peter
@nzmarkb8713 Жыл бұрын
Great advice as always mate, thanks👍👍
@michaelswonderfulworld3 ай бұрын
Pretty funny for a vehicle that needs to be reliable out in the boonies Just junk.
@kanemcdougall833710 ай бұрын
Another quality Toyota engine department decision. What a joke. Only diesel engine Toyota made worth a shit is the FTE-period.
@MarkSteele-yv8ll7 ай бұрын
Hi isn’t there a more durable metal upgrade option?
@shanetrujillo5977 Жыл бұрын
Great stuff, thank you
@gtb4 Жыл бұрын
Thank you for sharing! Great video.😊
@deanthompson83819 күн бұрын
Yep 👍
@simonbarnes4308 Жыл бұрын
So when should they be checked in a 200 series? Is there a rule of thumb in terms of years or kms??
@chadlantry858 Жыл бұрын
What klms you recommend replacing pick up on well serviced vehicle
@lukedrakogiannskis838611 ай бұрын
Great vid I’ll be in contact to order one I’ve just done a turbo I wonder
@rodmcleod3072 Жыл бұрын
At how many kms are these being replaced ??
@YeAverageJoe Жыл бұрын
Hey mate, great video. I can't seem to find the oil Pickup online anywhere for a 79 series. Did you have a link or part number ?. Cheers
@robkay9227 Жыл бұрын
Great advice
@ianhocking3374 Жыл бұрын
The scavenge pump pick up is not $30 but A$246.28 and there is none in Australia. 6-8 weeks from Japan.
@enginecare1417 Жыл бұрын
Hi Ian, The savaging pump dose not pick up oil from the sump, the savaging pump receives its oil supply from the turbo drain external to the engine. You are looking at the wrong part. We have plenty in stock genuine Toyota for $30.00 if you need one. Thanks Pete.
@horseshoe182 Жыл бұрын
thanks mate
@explorewa4wdadventures808 Жыл бұрын
So how long does it take to change out on a VDJ200 - also do you have the pick up/strainer part number handy for reference. Cheers
@tempestv8 Жыл бұрын
How much do you charge to replace the oil pickup on a 200 Series?
@steveformosa51913 ай бұрын
Hi I have a 2020 76 Land Cruiser will that have the same problem
@whitey321 Жыл бұрын
Hey mate very informative vid, I’ve got a 76 does the upper sump have to come off to change the oil pickup. Cheers Tim
@alcubano28872 ай бұрын
I wanted to know the same thing
@danielbrown4133 Жыл бұрын
What sort of K's should this be looked at on a LandCruiser 200 mate?
@antoncarmoducchi60574 ай бұрын
the implication here is that Toyota don't know what they're doing. Absolutely every scrap of evidence says otherwise.
@MlCKTITS Жыл бұрын
How hard is this to do on a 70 series? Something I could do at home being somewhat mechanically minded
@Slimerancherplayer Жыл бұрын
Can you change the pickup easily ?
@anthonywhelan837311 ай бұрын
Cheap insurance
@fordgt69 Жыл бұрын
Is the plastic oil pick-up accessible from just removing the tin oil pan or is it a motor out job and moving the larger alloy assembly? Referring to a VDJ200
@lukedrakogiannskis838611 ай бұрын
Remove the tin sump 2 bolts a 20 minute job
@rockbiterhd Жыл бұрын
These engines don’t seem to be that good lots of issues