Toyota Prius Gen2 ABS Brake Actuator Removal 44510-47050 + Inverter Removal

Рет қаралды 18,482

2 жыл бұрын

[Parts]
Toyota Prius Gen2 ABS Brake Actuator 44510-47050 (These are costly!!): amzn.to/3JmTg9i
[Recommended Tools]
TORX TEKTON Star Key Wrench Set, 9-Piece (Keys): amzn.to/3KiUHqu
WORKPRO 13-piece Torx Bit Socket Set T8-T60 (Sockets): amzn.to/3jdnfFW
Electrical Insulated Lineman Rubber Gloves Electrician High Voltage: amzn.to/3JmTDRe
U-Joint Set: 1/4", 3/8" and 1/2" Drive: amzn.to/3ambTvs
9pc Socket Extension Set: 1/4", 3/8" and 1/2" Drive: amzn.to/3pnvQGz
Sunex 9710M 3/8-Inch Drive Metric Crowfoot Flare Nut Wrench Set (Crescent Wrench Set for Brake Lines): amzn.to/3Kfz5uY
Tarp (For Spills): amzn.to/3r7bs0l
Fluid Catch Pan (Cheap - For Spills): amzn.to/38mAFgu
[For Replacement]
Prestone AS400 DOT 3 Synthetic Brake Fluid - 12 oz: amzn.to/3Jtgaff
Funnel Set: amzn.to/3J9XEbz
[Misc Tools]
Metric Wrench Set 8mm - 22mm: amzn.to/2xQn3ot
Socket Set 123pc Metric and Imperial - Good Quality: amzn.to/2NhqhL9
Socket Set Metric/SAE 23pc - Good Quality: amzn.to/3OuUHVS
--------------
BECOME A MEMBER OF OUR CHANNEL!
If you become a member of our channel, you get various cool and unique benefits!
Benefits:
- Early access to new videos
- A personalized shoutout in each new video during your membership
- Priority responses to your videos comments
- Access to a cool and unique emoji set
Join here: kzfaq.info/love/0HkS2-1Tk1ULQJj3uGbjdwjoin
--------------
[MORE INFO!]
I mentioned in the video that this is a junk vehicle, so this is a removal video and not a replacement video.
If replacing, then you can continue to follow replacement instructions here: priuschat.com/threads/replacing-brake-fluid-and-bleeding-brakes-on-a-gen-ii-prius-without-techstream.152808/
Symptoms:
- The normal buzzing when the car is first started continues to sound for a longer period of time, thats the brake pump trying to build pressure but failing to do so.
- ABS light on dashboard
- Codes such as: C1256, C1391 (Accumulator Low Pressure, Abnormal Leak of ACC Pressure)
--------------
[VIDEOS OF INTEREST]
Toyota Prius Gen2 Hybrid Battery - The 101 and DIY Cell Module Replacement
kzfaq.info/get/bejne/aJqie8SqzbW6iqs.html
How to Remove the Hybrid Battery on a Toyota Prius Gen2 (2004 05 06 07 08 09)
kzfaq.info/get/bejne/mZpngsmJqtXGf2Q.html
--------------
Instagram: tutorialgenius
--------------
Chapters:
0:00 Intro
0:48 Is My ABS Brake Actuator Broken?
2:15 How Does the Inverter Work?
3:39 Making the Car Safe
5:31 ABS Brake Actuator Disassembly
--------------
Toyota Prius Gen2 ABS Brake Actuator Removal 44510-47050 + Inverter Removal
The car in the video is a Toyota Prius 2007 Gen II.
Gen II applicable years: 2004 2005 2006 2007 2008 2009
SUBSCRIBE FOR MORE!
--------------
#ToyotaPrius #C1256 #4451047050
Tags:
2004 2005 2006 2007 Toyota Prius Hybrid Synergy Drive Inverter Converter 47120
Toyota Prius Inverters and Converters
Toyota Prius Gen2 inverter replacement
Toyota Prius Gen2 inverter removal
Toyota Prius Gen2 ABS
2005-2009 Prius ABS Actuator Replacement
C1256 low pressure pump.C1253 ABS motor relay
Toyota Prius Problem C1256 ABS pump replacement
--------------
PART NUMBERS:
44510-47050, G9200-47120, PJ25WA052
Video Title: Toyota Prius Gen2 ABS Brake Actuator Removal 44510-47050 + Inverter Removal
Video File Created Date: Monday, 4 April, 2022 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using KZfaq Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your KZfaq videos offline... Then upload!
-- ginkosolutions.com/youtube-bulk-uploader/
-- GinkoSolutions.com
Video Tags:
toyota, prius, gen2, abs, brake, actuator, removal, 44510-47050, inverter, brake actuator, brake actuator removal, brake actuator replacement, toyota prius, toyota prius gen2, gen ii, pj25wa052, g9200-47120, c1256, c1391, abs brake actuator, prius inverter removal, inverter removal, brake actuator prius, brake actuator noise, brake actuator repair, brake actuator assembly, brake actuator failure, brake actuator assembly prius, brake actuator symptoms

Пікірлер: 38

@TutorialGenius 2 жыл бұрын

Like and subscribe for more! All parts, tools and more information in the video description. If this video helped you, please support the channel by clicking "Thanks"! We also have memberships to our channel with great perks! kzfaq.info/love/0HkS2-1Tk1ULQJj3uGbjdwjoin Thanks for watching!

@anniegraf4027 10 ай бұрын

The only instructions worth anything on KZfaq!!!!❤

@TutorialGenius 10 ай бұрын

❤❤

@limitlesscombo6998 2 жыл бұрын

Appreciate the very detailed step-by-step! I

@paulgonzales7419 2 жыл бұрын

A+ video. Super simple and inspires confidence to DIY the dreaded ABS issue. Zero complaints. Idk if you have access to tech stream, but how to bleed the brakes using tech stream would be Uhhhhh-mazing.

@aaaaaaa7487 11 ай бұрын

Such a detailed and easy-to-follow tutorial. Thank you!

@TutorialGenius 11 ай бұрын

Glad it was helpful! :)

@vincentcoroller5628 Жыл бұрын

Hi there ! Thanks a lot for your video! I did it yesterday. It's working for the moment. It tooks me around 6hours with brake bleeding and freezing liquid bleeding. Thanks again for your video!

@TutorialGenius Жыл бұрын

You're welcome! :)

@toekneetogo 13 күн бұрын

I'm going after mine tomorrow & will use your video as a guide, you've got me very optimistic! 👍

@TutorialGenius 11 күн бұрын

Good luck!! You can do it! :)

@toekneetogo 9 күн бұрын

@@TutorialGenius STUCK! on last harness under the small hose, connected to the mount, frozen. BUT was able to twist the ABS mount & remove the rear rubber mounted nut with the front & third remaining nut/bolt, it's now loose & should come out, right? but doesn't. Is there something else mounted to the ABS module from underneath, the weight? any insight on what could still be holding the ABS module to the mount would be appreciated. Thanks for getting me this far👍

@toekneetogo 7 күн бұрын

@@TutorialGenius UNSTUCK - sprayed w/WD40 & let sit over the weekend, removed it today. There's no way to get it out without removing it with th mount assembly, weight is attached.

@TutorialGenius 7 күн бұрын

@@toekneetogo Yup! Just like 16:53 in the video. The bracket has to come with it. Tip: Standard WD-40 is not a penetrating fluid (Unless you get the more expensive can that specifically says 'penetrating' on it.). It's a lubricant. But more importantly congratulations!!! Hopefully you have a great sense of accomplishment and achievement! (and a heavier wallet from the money saved haha!)

@toekneetogo 7 күн бұрын

@@TutorialGenius bucks saved - YES! As the video goes on at 17:12 when I got all 3 out I figured it would slide out once the bracket nut was off, but nada. The weight attached to it underneath is too long with no room to lift the module & slide out :( but success getting it out & the replacement in👍 That's where I stopped, blisteringly hot today. Re-connecting batteries & bleeding another day, crossing fingers this used ABS Module will work & have a bit of life still left in it. update pending.....

@waqarqadeer5217 7 ай бұрын

Thank you. Very detailed video.❤

@TutorialGenius 7 ай бұрын

Glad it was helpful. You're welcome! 😊

@rmzstudio8229 Жыл бұрын

Taking the wipers and wiper cowl takes only 5 minutes and makes the job a lot easier rather than squeezing your hands behind and to the side. It also allows you to bring out the unit faster.

@TutorialGenius Жыл бұрын

That's another way of doing it, each to their own. I have done it both ways, I personally think my method is faster and easier.

@victorortega6856 2 жыл бұрын

I replaced mine following your video but my codes didn’t go away. Bled the brakes, but my pedal is hard and seems it lags to brake. When braking only one wheel locks and the right one keeps rotating. Like if the caliper isn’t working. Any recommendations?

@akaski777 2 ай бұрын

I was under impression these cars where easy to work on

@TutorialGenius Ай бұрын

Some components are a little tricky to access! I've ripped a couple of these cars apart. This job is definitely up there!

@zmoorer Жыл бұрын

Great vid! How did you bleed the brakes afterwards?

@TutorialGenius Жыл бұрын

I ended up selling the car for parts, so I didn't do that, but there is a tutorial on KZfaq that shows you how. You can do it via the OBDII port.

@lovemytechy 7 ай бұрын

what are the chances that just bleeding the brakes would make the low pressure issue go away? the car only has 130K miles on it and only low pressure error but no lights on the dash, but I do hear the ABS actuator over working

@yelsonlamelaza6476 Жыл бұрын

Donde puedo comprar una computadora de ABS de Toyota Prius Año 2006

@julanmichel8149 11 ай бұрын

I got one pruis dealer aka me $3250 I can you me too do it?

@TutorialGenius 11 ай бұрын

wow, thats a good joke!

@daks4s Жыл бұрын

Remove wipers

@rmzstudio8229 Жыл бұрын

Didn’t know there were snakes in the car 😂😂😂😂

@TutorialGenius 10 ай бұрын

vipers?

@msa_0619 Жыл бұрын

Hello there I have 04 Toyota Pruis problem with ABS unit it was making noise. I took the ABS unit check it. I just got a used one from E-bay turn out to a bad ABS unit. So I put the old unit back in the car but I am having hard time to get the last FUCKING brake line to hook up the line on the top of the ABS unit. Could you tell me easy way to hook up the last brake line. Without beening the brake ok the other 4-lines they hookup except one on the top 5-brake line ok

@MekkelRichards Жыл бұрын

How did you end up doing it?

@rmzstudio8229 Жыл бұрын

Hopefully you didn’t strip the thread on the abs pump as if you did, you’re pretty much screwed as it will leak. However, it should go in by hand and for better access remove the wipers and cowl that way it’ll be easier to access