Toyota Tacoma Transmission Rebuild Part 1

No video

Toyota Tacoma Transmission Rebuild Part 1

Рет қаралды 44,299

Күн бұрын

Part one of the transmission rebuild. This is the R150F Toyota Tacoma 5 speed.
R150F Rebuild Kit: cobratransmiss...
Transmission Jack: ebay.us/M0MCvS
20 Ton Press: amzn.to/3zMFfh8
Bearing Splitter: amzn.to/2WNSEqD
Gear Puller: amzn.to/3gVx5LV
Pitman Puller: amzn.to/3tbnoxT
Snap Ring Pliers: amzn.to/3h0wecZ
POR15 Paint: amzn.to/3tlnfYM
Chip Brush Set: amzn.to/2WNHK4a
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro Hero 8 Black: amzn.to/31avsTg
Tripod: amzn.to/2WjasJM
Send me stuff!
PO Box 133
Chattaroy WA 99003

Пікірлер: 89

@lawnerddownunder3461 Жыл бұрын

Serious shop envy over here. The thought of doing this on axle stands fills me with dread.

@markbithrey3635 3 жыл бұрын

The attention to detail is amazing most people would just pull it apart and put new bits back in and wack it back together so satisfying seeing you clean each and every bit and painting the little things 👌 perfect

@Jesus-hx5vg 3 жыл бұрын

That lift just made the transmission removal look like a piece of cake!

@k6-3spetznazhelmet 4 ай бұрын

Toyota makes the best parts in the world, second to none.

@murymih 3 жыл бұрын

With this kind of skill, you're truly underated..... this channel should be at 800k subscribers if not a million.

@stefanpia5419 3 жыл бұрын

Thanks for all the free entertainment Austin. Love your channel

@shelbydog1100 3 жыл бұрын

That’s a great tip on the por 15 stuff. I had to buy a new can the last time.

@user-ee7xy8tk8b 2 жыл бұрын

احسنت بارك الله بك اخي الكريم جعلها الله في ميزان حسناتك انت مخلص في عملك

@kiloyardstare Жыл бұрын

What a freaking pro! Definitely knows what he's doing.

@RogerM88 3 жыл бұрын

Impressive work dude. I'm already getting some anxiety just thinking if i wouldn't remember how to put that transmission back together.

@Clean_Duners 3 жыл бұрын

Recording and taking pictures of what your taking apart helps so you can go back and work backwards

@reececlark9725 Жыл бұрын

Great video series helping me out alot. You make it look easy, but I'm confident I'll get mine done in a day and ready to put in my 95 with a flat bed I built

@Mechaniclyfe 3 жыл бұрын

Sorry to hear about the accident hope you get well soon ❤️‍🩹

@thegonger1 3 жыл бұрын

Change the clutch fork while you are at it and grease it up good when you install it. I have seen those forks wear through at the pivot ball.

@tylersmith293 3 жыл бұрын

425k on mine. Works great.

@tomswindler64 3 жыл бұрын

Your just spoiling yourself now,all these new gadgets, keep doing what your doing and carry on.😎😎😎👍👍👍

@kflo1219 3 жыл бұрын

Just WISH I had your setup and TIME to do my rebuild RIGHT. 🔥as always!!

@alexanderstefanxandraswedi5835 2 жыл бұрын

Great video sharing

@RobBread1 3 жыл бұрын

Good job! Looking forward to the next episode.

@WhiskeyRiverRifleman 3 жыл бұрын

Nice work Austin

@tristanaplanalp3638 3 жыл бұрын

Make a video on how you organize all the stuff you rip out please

@frdbtr 3 жыл бұрын

Get the transfer case seals from toyota, they still make them. I just did the ones on my 91 4runner.

@kflo1219 3 жыл бұрын

Ball joints, seals and bearings ALWAYS OEM Toyota!! A little most cost = a lot less headache!!

@mstr_alexus 3 жыл бұрын

No entiendo un carajo de lo que dice pero me gusta el contenido y que aprende bastante

@SootyDiesel81 3 жыл бұрын

Terrain tamer in Australia would probably have a rebuild kit for that transfer case as it’s the same as the VZJ95 Land cruiser Prado Hope this helps

@lawnerddownunder3461 Жыл бұрын

Helps me! I have a dodgy transmission leaking fluid in my 95 series Prado.

@rylan7114 3 жыл бұрын

I'm rebuilding my R150F, had to replace the countershaft, 2nd gear and reverse gear.

@nzxtMonster 3 жыл бұрын

Amazing work, man. Keep it up.

@killianeastman1233 3 жыл бұрын

Dang good job dude

@WisdomInTheWoods 3 жыл бұрын

:39 play it forward! Home boy got beats! 😆

@MegaKREP 3 жыл бұрын

This is awesome!

@darciwalter3919 3 жыл бұрын

Great video 🥳🤩

@losbatiamigosdefran5710 3 жыл бұрын

Hi new sub greatins from Panama City Panama👍🇵🇦

@UdinVlog4828 3 жыл бұрын

Nice video 👍

@tufanodominique7135 3 жыл бұрын

It would be interesting if you show how you put all these parts to remember what goes where in the reassembly

@rampagedingo 3 жыл бұрын

Road to 120k subs!!!

@likearockcm 3 жыл бұрын

I would mess this up guaranteed !🤔😄

@Олег-х8р 3 жыл бұрын

Good afternoon, help to eliminate the leakage of antifreeze through the connecting tube of the radiator stove ,I tried everything thank you

@eulisescaraballo6149 3 ай бұрын

Greetings. To change only the input shaft bearing, do you have to disassemble the entire transmission?thank you.

@isaacsalberg8760 Жыл бұрын

Did your forks have a groove on them when you took them out? I am taking apart my transfer case on my tacoma and the forks have a groove in them that looks like its been wearing over time but i cant really tell.

@pauloramirez8216 11 ай бұрын

I've been on the verge of whether I should buy a transmission that has about 247k miles on it that includes everything to convert my 03 Tacoma to 4x4 all for $800 dollars. Or buy a lower milage transmission for 2,000 plus dollars.. How has your Tacoma doing now?

@tarrellhughes1078 Жыл бұрын

Anyone know why after my rebuild I can’t go back or fourth. Only thing not replaced is valve body

@amunrakane Жыл бұрын

Is it possible to swap the r150f transfer case onto that transmission ?

@briannowdesha3986 2 жыл бұрын

I'm trying to figure out if this is the transmission that is in my 01 PreRunner 2.7 automatic 4 cylinder if so it has 442 thousand miles on it

@jayzmuda1956 2 жыл бұрын

I have to replace my input shaft. Any way to do this without pulling both shafts from the center supporting plate?

@efil4kizum 8 ай бұрын

what happen to your input shaft?

@justinlong977 Жыл бұрын

Will a 04 Tacoma j shift case Mount to a 96+ r150f? I can’t find any Tacoma r150f’s in my area. Everything’s pass drop

@cgmwoodworx 3 жыл бұрын

Have you checked marlin crawler? They have pretty much everything I've ever needed.

@kiloyardstare Жыл бұрын

He definitely knows about Marlin Crawler. I spotted on of their blue shifter bushings in his transmission in the video.

@jdmDC2ftw 3 жыл бұрын

You need a smaller 3/8 impact for the smaller bolts brother. Using that heavy 1/2 must have gotten tiring lol.

@stevewhyte8476 3 жыл бұрын

Look at the arms on that yung-un !

@reececlark9725 Жыл бұрын

My 3/8 drive didn't break any of these bolts. Need a half inch

@Newtimer49er 2 жыл бұрын

What year was this truck and transmission ? Great job. I have a 2012 trd tacoma not sure what transmission is in it think it's a 4speed automatic but I'm thinking about rebuilding sometime in the future

@MrKatsuga2 2 жыл бұрын

What year model is this toyota tacoma?

@matts_.4494 3 жыл бұрын

I am wanting to swap an R series transmission into my 1999 4runner 3.4. I am wondering if I can use my existing transfer case, the one that is behind the automatic. I have heard they are the same transfer case, but I suspect the shifters are different Siri do you know anything about this?

@berniethompson8912 2 жыл бұрын

Which transmission is this ? Have a 96 4runner 4wd and going have to rebuild mine

@austinniemela 2 жыл бұрын

This is the r150f

@berniethompson8912 2 жыл бұрын

Ok thank you for responding back

@magnus9165 2 жыл бұрын

Austin, do you have any formal training? Did you grow up in a fabrication and repair family or environment? I know things are not always as they seem in videos, but you have tackled some big projects that turned out great. That can not be faked. Just wondering, because I have very little fab skills and little mechanical aptitude.

@austinniemela 2 жыл бұрын

No training! I figure this all out myself!! Thank you!

@clayhuser7230 3 жыл бұрын

Forgive me if you’ve answered this already. I was wondering if you put more than one coat when you’re powder coating any of the parts? Is there any advantage or disadvantage to spraying two or three coats on any of the small parts that you’ve experienced or found in your research?

@austinniemela 3 жыл бұрын

No I don’t believe there is any advantage to additional costs of powder!

@LxTxSURGE 2 жыл бұрын

Howuch do they charge for a rebuild from a actual good shop I have a 95 Tacoma 2w drive with 270 milles

@kiloyardstare Жыл бұрын

Cost me $2500 at Toyota, but that was 10 years ago.

@chrismith41399 Жыл бұрын

What year is this

@shanen4965 3 жыл бұрын

Any reason why you didn't replace synchros while you were in there?

@austinniemela 3 жыл бұрын

They are in good shape and aftermarket synchros aren’t that great

@billyfox384 2 жыл бұрын

I've got a 2006 Tacoma 4.0L with a 6 speed manual in the shop. Do you know if the rebuild and setup are basically the same as your tranny in the video? Appreciate any info.

@austinniemela 2 жыл бұрын

I’m not sure! I’ve never been in a 6 speed!

@billyfox384 2 жыл бұрын

Correction 2005

@billyfox384 2 жыл бұрын

@@austinniemela Thanks for the very quick reply