close-up super-slow-mo of cleaning spray. 10/10 would watch again.

Really good video and so much time taken to show the whole process. The slow motion bit was really interesting

This happens to so many Toyota cars because people have always been told: You buy a Toyota and the only thing you have to do is put gas and change the oil, and that is exactly what they do, then you have neglected maintenance like in this Camry

Just cleaned MAF on 99 Tacoma 2.7l- Worked great! Thank you for the pointers.

I'm a grown man, but I'm 100% comfortable saying your accent is adorable! Lol 😂 great video buddy!

Thanks for your video, I will be doing this in my 2001 sequoia 275k this weekend! Have a great 2020!

This is the best video I have watched on how to clean the MAF Sensor and I am going to try and clean mine ,will get clearer and I hope it solves my problem .Thanks you sir for your explanation and the video !

Excellent, detail explanation of the whole cleaning process. Great video !!!

Thank you for the video. I saw another video where the guy used an small brush. Now I know better.

On my 2000 Corolla, this is easy to access an remove for cleaning. Use ONLY electronics cleaner spray ... NOT brake cleaner. The 2 small screws that hold the MAFS on are going into plastic, so be careful and loosen the screws to remove them with fingers and do NOT drop the screws. Set them aside safely for re-install. Do NOT forget the inside 2 wires to clean that are unseen inside the 'barrel' ! Clean them too ...and a MAF Sensor ic cheap to buy ... much like a PCV valve is cheap and easy to replace...

Thank you for sharing. I have seen a few videos from others besides you previous videos. This is the BEST quality video and explanation of techniques. May you have a happy and prosperous New Year!

I feel like I’m watching a cooking channel with your beautiful narration

I just love your shows, I can just listen to your voice to be honest, it's very soothing

Thank you for an excellent video. Very valuable tip that engine will initially idle high after cleaning and once computer learns new information from sensor idle will drop down to normal.

Awesome thorough explanation & demonstration! This is very much appreciated. Thank you! 👍

I find a quick spray and let it sit for a few moments to soften up the deposits then a final spray to wash uses a lot less spray. I've never used a half can on a MAF myself.

love the energy in this video! much appreciated

Great Video, Thanks for the easy to do maintenance tip!

Thank You.... The best explanation and video on this problem / fix that I have seen....👍👍

Tnk u best explanations..im from South Africa

Thank you for this video in slow motion. I felt very comfortable following your steps.

Great video showing how to clean the sensor so easily.

I love your Videos your explanations are great and honest-Thank you my friend-HD

I never try it and watching you video will help me 9:03 😊 9:03 9:03

NOTE : Remove the O Ring before cleaning. The spray / chemical can cause the O ring to swell making the O ring very difficult to go back into the intake port. Use a small pick - carefully remove the O ring. Clean the MAF - dry and reinstall the O ring. Preferably wipe a thin layer of silicone grease on the O ring before re installation.

The visible wire on the outside that you are showing is the intake air temp sensor bulb. The smaller wire on the inside of the tube is the MAF wire. That’s the one that’s hard to see and really needs the cleaning.

Great video! Happy New Year 👋👍👊💥

So hepful and entertaining, thank you!

Thanks for the video, Very helpful.

Awesome dear friend. Thank you so much for sharing how to clean MAF sensor. If you could show us the video about how that works after cleaning it. Thank you.

Thank you for taking the time!

What a great video. My mass airflow sensor went bad because a stinkin squirrel made a nest inside my engine compartment of my brand new Toyota 4Runner and shoot through the wiring harness leading to the mass air sensor. I drove the car for a little over a month with a bad sensor and that made my mixture bad and dirty the heck out of my sensor. I had to buy a new connector and rewire it myself which wasn't that big of a deal but it still didn't fix it until I clean the mass air sensor. Just a note that you can have for yourself and give to your subscribers is how to keep squirrels out of your engine compartment. Buy some peppermint essential oil and put it in a spray bottle with water about 40 drops per 16 oz of water or a liter maybe is what you call it. Spray it all around your engine compartment and the squirrels will stay away. It works very well but you can't drive your car for about 10 minutes until that oil dries because your engine doesn't like burning peppermint oil

Thanks you so much for sharing your knowledge

Thank You will try this, LEN. UK.

Great job, thanks.

Thank you for the great video. Do you have a video on how to remove the o2 senser. Saw the one on cleaning.

Thank you for the tips.

HAPPY NEW YEAR!

Excellent video

Last days I did on a 2000 tundra, a big diference specialty on start up

Another well informed video . What is your opinion on cleaning O2 sensors as a preventative maintenance practice?

I really liked the slow motion video on that one.

Did you do a video showing how the engine was working prior to cleaning the MAF sensor? It would be nice to see the difference in rpms before and after cleaning.

Nice and very clear demonstration is perfect. Sir can i ask you if you have idea why my car innova deisel 2011 is not start even the fuel is good work but i think the injector is not work what is the possible cause or problem of this thank you very much

Very informative. Will try oj mine soon

Nice work!

Happy New Year my friend 🌝

👍nice informative video 👍

Great video 👏👏👏👏👏

Thank you for this usefull info.

Thank you! You are awesome

Excellent!

Just Superb 👌

your awesome !!

Very informative. Do you recommend cleaning or replacing anything else?

Outstanding job, as always. I would be interested in hearing your thoughts about different Toyota models and engines. Which ones perform better, reliability, ease of maintenance, etc. I've had a tundra for 19 years. Still runs good, but I'm not looking forward to replacing the starter if it ever goes bad.

Thanks a lot for this video

Thank you 👍✔️

Thank you.

Thank you Sir.

Very imformative

Thank you

I cleaned mine on my 2019 Toyota Tundra..why do they put white paint over the top of the screws. Had to buy new screws…crazy. Thanks for sharing your videos

Nice! Going to clean my 08 Scion xB, lately the rpm go over 4k rpm on cold start hopefully this will help. Might also need to clean the throttle body if this not fixing it. Otherwise vehicle running fine just rpm go up high on cold start and after a few seconds or minute it's back to normal. Thanks for the tip.

Thanks!!

thx my friend..perfecto!

Thank you!

Thank You, Bro! What else must I do, like on a 2012 Prius V, if this doesn't solve it? On an OBD II P0172 trouble code, Brother?

Thanks you

great demonstration the other important thing is to let it dry naturally and not use any compressed air

gracias

Do I need to disconnect the negative terminal of the battery if I clean the maf sensor?

I'm driving my sister's 2005 V6 Camry right now, and earlier got a check engine light with code P0174. Didn't hear any hissing, and car wasn't experiencing any sputtering or anything, so I pulled out the MAF Sensor, and sure as shit, it looked EXACTLY like the one in the video. Went to the auto parts store, bought a can of CRC for $11, and in 10 minutes, it was good as new!

Just use the spray ... OK got it TY !

So where the screws go in as I was screwing them in one of the brass threads popped out of place as I was tightening the other side and I can’t get it to tightening without the thread popping out

Don't brush it. Don't touch it. Don't remove it. Don't look at it! lol j/k ;-) This guy is the best.

I have a 04 Lexus LX470, got a can of this MAF cleaner, it says do not on maremma vortex sensors and on Lexus vehicles, just trying to make sure it’s safe to use, the maf sensor does seem very similar shown from this video, thanks!

Is it good to use Electric contact cleaner spray too cz i cannot find mafs cleaner spray in my city.

Ha! I LOLed at the part where he showed the dirty and clean side - mine looks *exactly* like that. Off to clean it, hope that fixes the P0174 error code . . .

You mentioned shaking after cleaning. Can you use compressed air?

Just cleaned my MAF sensor (had -10% LTFT. Now improved to -5%g). Amazing for 5 mins maintenance. I used a Liqui Moly brand MAF sensor cleaner spray.

Hi..can this cleaner be use to air flow sensor for mitsubishi triton @ L200 (year 2017)?

Excellent video, but safety gloves always first

so we scrub it with chore boy brillo. Right on hard to the filiment wire? Can I used a grinder? Maybe just some good old Diesel Fuel. Just joking, Great video Lad!

Could this be why i may have P0171? I took out MAF and it is dirty. Should i buy the cleaner n give it a try??

I've seen alot of these being sadly thrown away due to oil contamination on the electrical contacts. (code 24, 31). 🤦‍♂️. Good idea to clean them too incl. harness connector.

Great video. Can we use Contact cleaner? (electrical contact cleaner)

Can the MAF of the 2013 Chevy Impala LT be cleaned like this? It looks different.

Does the o ring need to be lubricated or the housing lubricated to prevent dust or the sensor sticking

WOW!

i always use a cotton bud passing lightly after spraying just to make sure everything is out

Hello .. is toyota verso 2016 diesel 1.6 same as toyota corolla .thanks

What accent is that ? And thank you for the video.

I have a 02 Sequoia. Code came up for Mass airflow sensor . I cleaned it. Cleared code but code comes back. I replaced it and cleared code. Code still there. Dissconnected battery. Waiting 10 min. Trying to see if this will clear it.

My 2000 2.7 4runner was stalling when slowing down. I did the throttle body cleaning as well as MAF cleaning. Still stalls at red lights. Any idea? I'm going to clean MAF again, how long do you wait before reinstall?

Can this CRC be used to clean 02 sensors?

In my area MAF sensors for 4Runner 1988 3.0 liter 3VZE engine are not available, even remanufactured ones. The cheap Chinese ones are apparently quite useless. Is there a good reputable competent source for remanufactured or Denso equivalent MAFs for this application? Please advise. Several people may have need for these. Otherwise cars will be undrivable.

Several mechanics say CRC Electrical Cleaner is safe to use on MAF too??

How often would you recommend inspecting and cleaning the MAF sensor? Every 30,000 miles? The owners manual of my car does not mention this component.

Hi. Can I use contact cleaner spray? For my rav4 2008