TP4056 module modification for more lithium Batterys

Рет қаралды 57,956

Күн бұрын

TP4056 module modification for more lithium Batterys.
This is experiment only but you can try. Because this was working.
Components used in this project:-
1. TP4056 Lithium Battery charging module.
2. TIP3055 Transistor
3. 56 Ohm 1W or 2W
4. 1K Resistor
0:00 - Circuit Assembly.
2:08 - Testing.
4:43 - Testing 18650 4 Battery's.
#tp4056
#diyelectronic #tp4056_module #batterycharger #18650 #homemade101

Пікірлер: 74

@homemade_101 21 күн бұрын

DIY Power Inverter 12v to 220v : kzfaq.info/get/bejne/gZOXhq1_zs7JiX0.html

@NikiBretschneider 14 күн бұрын

That 0.5A is current drawn from the 3P battery due to equalizing its voltage to a 1P one. This is why the current goes down, the 3P battery become slightly discharged as it slightly charges the 1P one. Furthermore, that transistor end up in saturation (due to heavy base current) connecting the B- (collector side) to the ground (emitter side), which does virtually nothing to the charging current, because charging current still goes through TP4056, because this IC regulates the current at the positive side. Changing that programming resistor to 1kΩ increases the output current to the 1.2A, which is kind of unfortunate as the TP4056 is rated to 1A max. This modification is nothing than a nonsense from its beginning to the bitter end.

@homemade_101 14 күн бұрын

thank you

@MrFlagstaf 11 күн бұрын

@@NikiBretschneider nice! that was my thought from the very beginning. You confirmed it, thanks! Absolute nonsense

@kailasingle460 8 күн бұрын

One cell of 4.2 v How much max current we can give?

@DARKNESS19906 7 күн бұрын

@@NikiBretschneider yeh!! Your right 👍👍👍👍

@emanikebiz 3 күн бұрын

@@NikiBretschneider HI. donde te puedo escribir?

@emilsangatta937 11 күн бұрын

Hi, is it posible to mod drone remote control so it can yaw smoother?

@homemade_101 11 күн бұрын

yes,.. you can try it

@Jim_One-wl4ke 12 күн бұрын

Wow! That’s cool. If this could be done , may I know is it possible to do one mode similar to make a 3S bldc esc into 200v bldc esc ? I didn’t see anyone doing this yet. Thanks ❤

@homemade_101 12 күн бұрын

welcome. try

@noanyobiseniss7462 21 күн бұрын

nice but how to charge them when they are in a 4s configuration?

@homemade_101 21 күн бұрын

This connection is not correct. If so, we should do a separate battery charging by banning with a 4s balancer circuit. I made this as a test for this module.

@noanyobiseniss7462 20 күн бұрын

@@homemade_101 I was considering using a NC relay for the 4s and pull it when the charging circuit activates but then i'm not sure if the relay will fail open or closed and that would be a fire hazard. also considering i wish to use it in a battery back for my old hammer drills there would not be room for the 3 high power relays that would be needed. I could use a A triple-pole switch but i don't like manual control especially if you forget then you fry the system.

@user-wh1hu6sd4u 17 күн бұрын

من العراق احييك ايها الانسان البطل فعلن لديك ابداعات قيمة شكرا جزيلا لحضرتك 🌹

@homemade_101 17 күн бұрын

thank you and welcome

@user-gj3jy1qv5u 5 күн бұрын

@@user-wh1hu6sd4u Что за каракули ?

@EvHindustan 20 күн бұрын

😂😂😂 5amp not 500 mah only😅

@homemade_101 20 күн бұрын

Ignorance is visible.

@Jackson-dx6du 20 күн бұрын

Зробив зарядку на 0,5 ампера🤷

@homemade_101 20 күн бұрын

yes i thik battry was charging

@johnbodlina3193 18 күн бұрын

Co to je? To máte v Indii nějaké nové hodnoty pro Ampery. Toto je velký fail.

@homemade_101 18 күн бұрын

okey

@iosifferencz5432 21 күн бұрын

Multumim,bine venita inovați,merita abonat ❤

@homemade_101 21 күн бұрын

Bucurați-vă și bun venit canalul meu.

@nfactor5875 2 күн бұрын

О мой индийский друг! Я сначала не узнал тебя в перчатках. Когда пойдешь в майкрософт работать?

@sergeypetrov1358 8 күн бұрын

😂 Какой смысл ставить транзистор пипец😅

@homemade_101 8 күн бұрын

@user-gj3jy1qv5u 5 күн бұрын

Вроде как усилитель тока ?

@dapakers 12 күн бұрын

the ic max current output is 1 amp only.theres no way this could boost current output.. cant full everyone though

@homemade_101 12 күн бұрын

full everyone

@hanymagdy2095 21 күн бұрын

Dear you are creative. The first question, what is the benefit of the 1 kilo resistance? Why didn't the blue LED light up after the complete charging? Thank you.

@homemade_101 21 күн бұрын

A carbon film is used because the SMD resistor burns when a large current is passed. It will not turn blue because the batteries are not charging at the same time. A balancer will be used for this.

@hanymagdy2095 21 күн бұрын

means that after the charging is complete, it turns blue and thank you

@homemade_101 20 күн бұрын

@@hanymagdy2095 welcome

@sujanmajumdar9760 10 күн бұрын

Now this board 2amp?

@homemade_101 10 күн бұрын

yes

@sencerylmaz3375 18 күн бұрын

Not work. TP4056 out 4,20V - 0,65V Base = 3,55V out insufficient charger

@homemade_101 18 күн бұрын

what

@sencerylmaz3375 17 күн бұрын

@@homemade_101 you are a fraud

@Freeman666Gordon 3 күн бұрын

These TP4056 boards cost 1.5$ for 10 of them, but 🤡 "forgot" to measure voltage on cells after current fell to 10% of nominal.

@homemade_101 3 күн бұрын

yep

@user-bn2hp5zb1c 5 күн бұрын

ایده بدرد نخوری بود نیم امپر 😂😂😂

@homemade_101 5 күн бұрын

@user-by5yy5fd8y 21 күн бұрын

Very good First time i saw a real video on this topic on youtube.

@homemade_101 21 күн бұрын

thank you bro

@edsonbomber5 12 күн бұрын

Nessa configuração esse transistor não está servindo para nada 😂😂😂😂😂😂😂😂😂

@homemade_101 12 күн бұрын

@curits8260 15 күн бұрын

what the purpose of this? to increase the fast charging?

@homemade_101 15 күн бұрын

Stop burned the module

@curits8260 15 күн бұрын

@@homemade_101 thank you for the reply. this is good idea to stop burning module.

@GUILHERME-CRUD-4K 17 күн бұрын

Carga lenta

@homemade_101 17 күн бұрын

yes sorry

@youbiku 21 күн бұрын

i'll tray it in my project to

@homemade_101 21 күн бұрын

good luck.

@Aaliyah21 20 күн бұрын

💯💥Good job

@homemade_101 19 күн бұрын

thank you

@user-qn7lw4ch9q 18 күн бұрын

Μπράβο πολύ έξυπνο. Συγχαρητήρια.

@homemade_101 18 күн бұрын

thnaks

@user-cd2dd1rw4q 9 күн бұрын

И нахера там транзистор если все всеравно идёт через микруху, она и ограничивает ток, максимум может дать 1А заряда. Читай даташит и схематику изучай тормоз!

@homemade_101 9 күн бұрын

sorry

@MrGekson 9 күн бұрын

Последовательно с микросхемой еще транзистор. Ну да смысла от него нет. Это наверно если шунт в его цепи ставить, который микросхема будет анализировать.