Tracksaw PictureFrame [video 514]

Рет қаралды 35,743

Жыл бұрын

In this one I make a #picture #frame using just a #tracksaw. Why? Because I was asked to! Thanks Dafydd @thedeafmaker for asking the question over on 10MW Plus!
.
Follow Dafydd here - / thedeafmaker
.
Now, to be absolutely clear, I do not recommend this as a method for aspiring picture frame makers to go into production - there’s a reason why commercial framers use cast iron Morso guillotines - but, if you need a quick frame making - or perhaps a last-minute gift - and all you have available is a tracksaw, then yes, it’s absolutely doable. Enjoy!
This is my last scheduled public KZfaq video for 2022, thank you so much for watching. I'll be back in 2023, but not until February; I’ve been posted regular videos for six years now, pretty much without missing a beat, and I think it’s time to take a breather. I’ll still be posting regularly to the members at 10MinuteWorkshop Plus and the public KZfaq videos will resume in February, but for January I’ll be taking a break and catching up with family, where I can.
My very best wishes for the festivities, and I'll see you next year.
Peter
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Support 10 Minute Workshop as a KZfaq Member* bit.ly/10minuteMember
*Support 10 Minute Workshop on Patreon* - / 10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Cheap & Easy Tracksaw Mitre Jig - • Cheap & Easy Tracksaw ...
Mondrian-style table - • Patchwork side table w...
3 Drawers, no tape, no ruler - • I Make 3 Drawers - no ...
Storage Cubes - • Storage Cubes: A Basic...
Plywood shelves - • Plywood Shelves - A Ba...
Little Plywood Boxes - • Little Plywood Boxes -...
Drill Press Table - • £50 / $60 Drill Press,...
Ikea Curtain track DIY MFT - • DIY MFT with Ikea Curt...
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - bit.ly/TracksawWorkshop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
eBay UK - bit.ly/Buy_eBay_UK
++++++++
Handy consumables & gear:-
Note that prices fluctuate - some have risen since I made my purchases.
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - benchdogs.co.uk/collections/r...
O3Adhesive CA glue. Use offer code 10MinuteWorkshop at checkout for 10% discount across the board at O3 Adhesives - www.o3adhesives.co.uk/?sca_re...
03 thick black CA adhesive & activator bundle - www.o3adhesives.co.uk/product...
Bessey DuoKlamp - amzn.to/3eDz1Ig (US: amzn.to/3w1s1dM)
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - amzn.to/3DnWzvJ
Polyvine Polyten PVA - amzn.to/2EY9Dgf (US(crazy price, just for reference) amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - amzn.to/2zpHlp8 (US: similar) amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
+++++++++

Пікірлер: 190

@danielrisberg2112 Жыл бұрын

You recently made me buy a Domino. Now I want a tracksaw as well. My wife will probably contact you shortly 😂

@10MinuteWorkshop Жыл бұрын

She won’t be the first..! 😂👍👍

@temporarynoble Жыл бұрын

You can’t watch Peter and not end up buying a track saw 😂

@lesbentley4082 Жыл бұрын

I’ve built my entire shop based on Peter’s work and his KZfaq channel!!

@manceconomist Жыл бұрын

This channel must have been responsible for a good few TS55 and Domino sales. Come on Festool, gift him the table saw he has his eye on.

@dougsaunders8109 Жыл бұрын

Nah I went for a Bosch saw and two dominoes. Wife does not realise Festool is like a designer bag very expensive…..

@xinixxagnix201 Жыл бұрын

From a genius jig to a Rembrand, thnks Peter for all the wood wisdom, cya in februari, all the best.

@10MinuteWorkshop Жыл бұрын

Thank you! Same to you and yours too! 🙌👍👍

@jhippl Жыл бұрын

you really make the track saw look like the multitool of a workshop. I am gonna save up and get one with a nice work table like you have and finally get rid of my cheap jobsite tablesaw.

@WasimBarri Жыл бұрын

It amazes me what you can do with a track saw. I own a table saw and when I do a tricky cut like a rebate, I always say you can't do that with a track saw and yet you prove me wrong every time. Even your jigs are so useful and so simple. You are the track saw king!

@10MinuteWorkshop Жыл бұрын

Thank you! There are a few cuts where a tale saw is easier, and one or two that just aren’t possible with a tracksaw because of the direction they tilt, but generally speaking they’re a very versatile tool. 👍

@wittworks Жыл бұрын

Nicely done! You should make an end grain cutting board only using a track saw.

@10MinuteWorkshop Жыл бұрын

Thanks! I think Keith @RagnBoneBrown has just done that - though he did cheat a bit and use his thicknesser! 😂 👍 kzfaq.info/get/bejne/qLCPYM6krKq3kaM.html

@andyc972 Жыл бұрын

Always interesting to see how you set about even a simple project like this Peter, as always a well organised build with a neat outcome ! Thanks for all your output during 2022, and enjoy your well earned break, Happy New Year !

@IJacinto66 Жыл бұрын

I wish you all the best, take care and I can’t wait till February. Have a wonderful Christmas.

@10MinuteWorkshop Жыл бұрын

Thank you, you too! 👍

@carlculpepperimages Жыл бұрын

Merry Christmas and Happy New Year, Peter! Thanks for all the great content this year - looking forward to what you share in 2023!

@10MinuteWorkshop Жыл бұрын

Thank you, you too! 👍

@planespeaking Жыл бұрын

Always good. Michael Alm also has a great frame video (floating frame) and a few helpful mounting tips.

@dougdavidson175 Жыл бұрын

Thanks for all you do to pass on your tips & tricks. Merry Christmas & a Happy New Year to you and yours. Take care & stay safe.

@10MinuteWorkshop Жыл бұрын

Thank you, you too! 👍

@antonoat Жыл бұрын

Great job Peter. Thanks for sharing all the valuable advice and hints and tips/ reviews throughout the year. Hope you have a fab Xmas and a fantastic 2023! 👏👍😀🍺

@10MinuteWorkshop Жыл бұрын

Thank you! 🙌👍

@SteveMonk1956 Жыл бұрын

Thank you for all the videos and advise Peter. Have yourself a wonderful Christmas and a well earned break. Take care.

@10MinuteWorkshop Жыл бұрын

Thanks Steve, you too! 👍👍

@Brinslade Жыл бұрын

Thanks for all the videos in 2022. Merry Christmas and happy new year to you.🎄👏

@10MinuteWorkshop Жыл бұрын

Thank you, you too! 👍

@gaz740 Жыл бұрын

Thank you for all your vids this year Peter. It was great to meet you at Makers Central too. Hope you and your family have a great Christmas and a happy and peaceful New Year.

@10MinuteWorkshop Жыл бұрын

Thank you! 🙌👍

@Rwjudy48 Жыл бұрын

Peter, thank you for all the insightful videos in 2022. Happy Christmas.

@10MinuteWorkshop Жыл бұрын

Thanks you! And dry best wishes to you and yours too! 🙌👍

@mandyleeson1 Жыл бұрын

Another achievable project. Thanks Peter. Have a happy Christmas with your family and enjoy the break!

@10MinuteWorkshop Жыл бұрын

Thanks Mandy! And you too! 🙌👍

@MCsCreations Жыл бұрын

Really beautiful work, Peter! Nicely done! 😃 I need to try to make some as well! Stay safe there with your family! 🖖😊 Merry Christmas and happy new year!

@10MinuteWorkshop Жыл бұрын

Thank you, and you too! 🙌👍

@lincolndickerson1293 Жыл бұрын

Enjoy the holidays and your break. Thanks for all you share with us.

@10MinuteWorkshop Жыл бұрын

Thanks, you too! 👍

@derekhawley9660 Жыл бұрын

You always show such a practical approach to simple projects, which makes them achievable to us mere mortals. I would be interested in seeing your approach to making 'floating' frames. Merry Christmas and Happy New Year.

@10MinuteWorkshop Жыл бұрын

Thank you, same to you too! 🙌👍

@rohanzzr Жыл бұрын

Great video as usual Peter, I liked the multi camera angles at the start. Very fancy. You've kept me very interested this year with your videos and made me make a few purchases including the Bench Dogs fence system. You deserve a break. All the very best to you and the family and look forward to more content in 2023.

@10MinuteWorkshop Жыл бұрын

Thank you! Very best wishes to you and yours, too! 👍

@ronboe6325 Жыл бұрын

Finally getting into printing my own photo's and finding out - frames are expensive!! So this is very timely for me. Last hurdle - sourcing good glass. sigh.... And matting is a deep rabbit hole too.

@elguapo1507 Жыл бұрын

Looks really nice! 👍 Have a great Christmas Peter and family and EVERYBODY who watches your work here! Have a good one all!

@10MinuteWorkshop Жыл бұрын

Thank you! Same to you and everyone too! 🙌👍

@jarrad5244 Жыл бұрын

Your channel is amazing! Love your videos, creativity and detailed explanations 🙂great cabinet maker!

@10MinuteWorkshop Жыл бұрын

Thanks so much! 🙌

@colindoesdiy Жыл бұрын

I hope that glueing jig is Square Enough for this job 😁 Hope my wife doesn't see this one. Merry Christmas and a Happy New Year to you and yours, enjoy your time off and see you next year here on KZfaq.

@10MinuteWorkshop Жыл бұрын

Thanks Colin! Yes, pretty sure it was square enough! 😂👍👍

@anwolfs9804 Жыл бұрын

Excellent topic, since I'm planning the same only with mirrors! No tracksaw however, but I do plan on making that mitre jig! Happy Holidays and see you in February!

@10MinuteWorkshop Жыл бұрын

Thanks, you too! 👍

@DidierHoubrechts Жыл бұрын

All my best too ! And thank you very much for all your videos !!!

@10MinuteWorkshop Жыл бұрын

Thank you! 🙌👍

@paulhodgson4790 Жыл бұрын

You may be happy with how it went together but more importantly is Mrs 10 Minute happy? Hope your festive season is going well. Best wishes

@10MinuteWorkshop Жыл бұрын

She was happy enough to order another two Paul! 😂 Festive fortnight going well, thanks - hope yours is too! 🙌👍

@coop_coop007 Жыл бұрын

Lidaldi strikes again! A Christmas family project, the family will be pleased, possibly. Merry Christmas and many thanks for a great years content.

@10MinuteWorkshop Жыл бұрын

Thank you! 👍

@usablellc6735 Жыл бұрын

You did a great job with this. I found your channel a while ago just as I was starting to think about making some picture frames. I came close to buying a track saw but went with a table saw since it seemed better suited to ripping long narrow widths and also because with the supplied fence, jigs not were required. I tried cutting the rabbets with the saw but found that the router table worked better for me. There's no doubt that the miters are much more accurate with the jig you created and it allows you to do everything with a single saw whilst I have to break out the miter saw to cut the corners. My "shop" is basically my back deck so all these tools are a pain to manage which may, in a few months, lead me back to the track saw now that your video has demonstrated how easy it is to use for frame making.

@10MinuteWorkshop Жыл бұрын

Thanks! 👍

@bigmonkey999888 Жыл бұрын

Hi Peter, as all your projects brilliant mate. Happy new year see you in February Steve

@10MinuteWorkshop Жыл бұрын

Thanks Steve. Very best wishes to you and yours! 🙌👍

@daviddura1172 Жыл бұрын

have a good holiday... your videos are always time well spent...

@10MinuteWorkshop Жыл бұрын

Thank you! 🙌👍

@johncollins2067 Жыл бұрын

great video.. that's a pretty slick way to make a rabbet with the track saw, even though you appear to have 8+ routers in your shop lol

@10MinuteWorkshop Жыл бұрын

Thanks! Wouldn’t be a tracksaw picture frame if I used a router though! 👍

@DerekTJ Жыл бұрын

Beautiful, smart and neat.

@10MinuteWorkshop Жыл бұрын

Thank you! 👍

@markrowland5393 Жыл бұрын

Hope you and your family have a very enjoyable Christmas and Happy New Year.

@jansempels2663 Жыл бұрын

Very nice ! And so easy.

@clivetonge4352 Жыл бұрын

Hi Peter, just noticed you have reached 200k subscribers. I am happy to say that I am one of them. 😊

@10MinuteWorkshop Жыл бұрын

Thank you! Yes, happened Monday. 👍👍

@davidsneddon2242 Жыл бұрын

Excellent as always Peter, just brilliant mate👍

@10MinuteWorkshop Жыл бұрын

Cheers David! 🙌👍

@theduftmeister Жыл бұрын

Nice one Peter. Have a great Xmas and NY 👍

@10MinuteWorkshop Жыл бұрын

Thank you! You too! 👍

@awantamta Жыл бұрын

Nicely done with the track saw and looks really good. Seasons greetings to you.

@10MinuteWorkshop Жыл бұрын

Thank you, same to you too! 🙌👍

@Konzertheld Жыл бұрын

Well that was unexpected, I expected you to make those rebates with multiple passes, but the way you did it turns out much cleaner of course. Also, given some practice, it's probably a lot faster. Guess I could modify my table to be able to make this kind of cut, too.

@riba2233 Жыл бұрын

Watching right away!

@Pun_Solo Жыл бұрын

The mileage you get out of a tracksaw is incredible. I live in a camper and a tablesaw just doesn't make sense for me but a tracksaw takes up significantly less room. I just now found your channel and am going through your tracksaw specific videos. Keep up the great work.

@10MinuteWorkshop Жыл бұрын

Thanks! 👍

@attheworktable Жыл бұрын

i like how your videos are leaning to using the tools you have without going out and blowing a bunch of money to make something.

@10MinuteWorkshop Жыл бұрын

Thank you! 🙌👍

@christycullen2585 Жыл бұрын

Merry Christmas Peter & great new year to you & yours

@10MinuteWorkshop Жыл бұрын

Thanks, same to you too! 🙌👍

@A_Friendly_Robot Жыл бұрын

Congrats on 200k Peter, well deserved!

@10MinuteWorkshop Жыл бұрын

Thank you! 👍

@BensWorkshop Жыл бұрын

Good work, that jig shows its worth. Have a merry Christmas and a happy new year, e you in February.

@10MinuteWorkshop Жыл бұрын

Cheers Ben! And you too! 🙌👍

@BensWorkshop Жыл бұрын

@@10MinuteWorkshop e? See! ;)

@JamesSmith-dt3yf Жыл бұрын

Nice little project 👌

@henrysara7716 Жыл бұрын

Thank you Pete, Merry Christmas.

@10MinuteWorkshop Жыл бұрын

Thanks, same to you too! 👍

@JoeC92 Жыл бұрын

"I would normally use glazing points but I don't know where they are" 🤣 Always love your honesty in your videos. Merry Christmas to you and your family.

@10MinuteWorkshop Жыл бұрын

Thanks! Same to you and yours, too! 👍👍

@rodgerq Жыл бұрын

All the best, Peter. Enjoy your break.

@10MinuteWorkshop Жыл бұрын

Thanks Rodger! 🙌👍

@dougsaunders8109 Жыл бұрын

I can see the sad Kapex sitting in the background when the 45’s were cut…. 😊. Would spoil the video some what! Have a great Christmas, thank you for the entertainment and information over 2022. Looking forward to 2023 Edit: Respirator should be A2 for organic vapours, solvent based paints, adhesive and cleaning detergents

@ReclaimDesign Жыл бұрын

Fair play Peter, that is nowhere near as easy to do as you make it look! My picture frame done using only a track saw would come out more "abstract" I think

@PaulWoodJatobaFilms Жыл бұрын

Merry Christmas, Peter, and a very happy New Year!

@10MinuteWorkshop Жыл бұрын

Cheers Paul! 🙌👍

@i679n5 Жыл бұрын

I saw your paper tape holder and I went WOW 😍

@10MinuteWorkshop Жыл бұрын

😆👍

@chriscole1859 Жыл бұрын

@@10MinuteWorkshop 9:43 So pleased you included this - whilst watching many videos I have tried to figure out why had a pull down blind over a bench. Merry Christmas. Thanks for all your videos this year.

@Thesidingsworkshop Жыл бұрын

Cracking build mate

@10MinuteWorkshop Жыл бұрын

Thanks Dan! 👍👍

@andyraven6219 Жыл бұрын

Merry Christmas and a happy new year to you.

@10MinuteWorkshop Жыл бұрын

Thank you! Same to you too! 🙌👍

@alanmullock381 Жыл бұрын

All the best for the festivities Peter!👍👍👍👍👍👍👍👍👍👍👍😎😎😎

@10MinuteWorkshop Жыл бұрын

Thanks Alan! 👍

@cliveclapham6451 Жыл бұрын

Framed 🎉❤

@temporarynoble Жыл бұрын

Nice project, happy Christmas

@10MinuteWorkshop Жыл бұрын

Thanks! You too! 👍

@Vergeltungswaffen3 Жыл бұрын

been waiting for something like this, I will be attempting a very large frame for a map - thanks for more track saw content as I can't stand every US based 'diy' channel using a fortune of tools in their huge workshops

@10MinuteWorkshop Жыл бұрын

Thank you! Always keeping it real here in the 10MinuteWorkshop! 😂👍🙌

@Micha_Ba Жыл бұрын

Since i watch your videos, i'm pretty sure there is no need for a table saw 😀 Merry xmas to you and your family 🎅

@10MinuteWorkshop Жыл бұрын

Thank you, same toy you and your family too! 🙌👍

@bazstarkey8806 Жыл бұрын

Great video

@Mikey__R Жыл бұрын

Thanks Peter! I'd be interested to see how you might add splines to reinforce the corners. I suppose you clamp the frame at 45 degrees to the front of the bench, cut a kerf, then add the spline?

@10MinuteWorkshop Жыл бұрын

Not sure splines would add much strength tbh; you’d probably be better of popping a biscuit or a couple of dowels in there, or small dominos. 👍

@PA3GUQ Жыл бұрын

Merry Christmas Peter! Greetings from the Netherlands.

@10MinuteWorkshop Жыл бұрын

Thank you! And best wishes from London! 🙌👍

@marknadin770 Жыл бұрын

All the best Peter👍👍🍺🍺

@10MinuteWorkshop Жыл бұрын

Thanks, you too! 👍👍

@AngieWilliamsDesigns Жыл бұрын

Still hoping to find a video that will let me get my mitered cuts repeatable. But this was a great video. I definitely would like to make a jig like that

@tjacksonwoodworker3726 Жыл бұрын

Merry Christmas and a most Happy New Year,,

@10MinuteWorkshop Жыл бұрын

Thank you! Same to you too! 🙌👍

@m0aze611 Жыл бұрын

Merry Christmas 🎅🎄🎄

@10MinuteWorkshop Жыл бұрын

Thank you, you too! 🙌👍

@tomwills918 Жыл бұрын

Oooh what went in the frame Peter? An early edition Ordnance Survey map..? Lovely result - and Merry Christmas to you

@10MinuteWorkshop Жыл бұрын

Thanks! It’s a reprinted map of the area where I live from just before our house was built. A very thoughtful gift from out children a while back. 👍👌

@J.M.Lander Жыл бұрын

You made that look easy. Such a skilful woodworker. I am sure you would have said during the build video but I can’t remember and I’m being a bit lazy but what is the depth of your MFT / micro jig hybrid worktop?

@10MinuteWorkshop Жыл бұрын

Thanks! Front to back, my DIY workshop MFT is 800mm or thereabouts; a bit deeper than a regular MFT/3, it’s handy extra space. 👍👍

@J.M.Lander Жыл бұрын

Thanks Peter. It seems a great size. Have a great Christmas and new year break.

@MJ-nb1qn Жыл бұрын

All the Best to You and Family this Holiday! I love watching your videos. You work the track saw wonderfully. I knew a worker who was quite adept with a big plunge router. When I complemented a cut he had just made, he said, “I could cut your hair with this thing if you could hold still”! How about you with your track saw? Thanks 🙏

@10MinuteWorkshop Жыл бұрын

Short back & sides or just a trim?? 😂 And thanks! 👍

@marcbarash6045 Жыл бұрын

Happy Holidays

@10MinuteWorkshop Жыл бұрын

Thanks, you too! 👍

@davidmatke248 Жыл бұрын

Merry Christmas!

@10MinuteWorkshop Жыл бұрын

Thank you, you too! 👍

@mwoody4560 Жыл бұрын

Happy Holiday

@10MinuteWorkshop Жыл бұрын

Thanks, you too! 👍

@adrianpennaertz3921 Жыл бұрын

Merry Christmas

@10MinuteWorkshop Жыл бұрын

Thank you! Same to you too! 🙌👍

@dgmx5 Жыл бұрын

Bit of a silly question Peter, but where do you take the cover photos for your videos? It doesn't immediately look like you take them in the workshop (surely not enough space for the lighting, backdrops etc alongside the benches, tools, vacuum hoses etc). Fancy doing a BTS video for us and sharing your photographic tips too?

@10MinuteWorkshop Жыл бұрын

They're shot in the workshop; I've done a few little clips and snippets for the channel members over the years, but it's not something that would play well with the rest of the channel content. There's a backdrop that pulls down over the 'saw wall' and the existing lights are all daylight balance LEDs, so they're pretty easy to shoot, usually a still pulled from a 4k video clip. 👍

@normanboyes4983 Жыл бұрын

Hi Peter and Happy New Year. That was interesting, I had saved it for watching later as I do want to make some picture frames. Before viewing I was rather expecting you to use the MFT holes, bench dogs and a reference stop (or two). Do I now need to find your video on making the mitre box?

@10MinuteWorkshop Жыл бұрын

Thanks Norman! The problem with using the MFT is that a) not everyone has one, and b) for mitres especially, the rail has to be fully supported, which is harder to do on the MFT. The mitre box link is in the description, but it was the video from a week before this one! 👍

@normanboyes4983 Жыл бұрын

@@10MinuteWorkshop Found it - cheers Peter.👍

@graemewhittle1665 Жыл бұрын

The frame came out really well and it’s a project I’ve wanted to try for some time. Can I ask how many coats of lacquer did you use ? Thank you.

@10MinuteWorkshop Жыл бұрын

Thanks Graham! Just two coats of lacquer on this, and it dries really fast. 👍

@barryirby8609 Жыл бұрын

Would have had to reinforce the miters with a domino or sticking with the track saw, cut a slot in each corner and install a spline. Nice frame, thanks for posting.

@10MinuteWorkshop Жыл бұрын

For my next trick - cutting splines with a tracksaw… 😂👍

@meperson Жыл бұрын

@@10MinuteWorkshop I think the simplest answer to reinforcing the corners is basic dowels - you can use any, even the cheapest jig to add those as they are actually perpendicular to the ends.

@michaeldullaway746 Жыл бұрын

Another excellent video, thank you Peter. Do you use the dovetail clamping on your workbench often? I remember watching the original video where you introduced it and then incorporated it into your mft top, but haven't really seen it being used since? On this video, I note you used the dovetail clamps as "regular" mft/track clamps through the dog holes. Thanks again.

@10MinuteWorkshop Жыл бұрын

Thanks! The microjig dovetail clamps get used now and then - they’re used in the slots as well in this vid - but I don’t find them especially convenient to use, and when I change the MFT top I’ll probably try regular t-slots instead. 👍

@michaeldullaway746 Жыл бұрын

@@10MinuteWorkshop thanks for the quick reply Peter. Yes, I missed them in the video, my mistake! I've recently gotten a t track router cutter so plan on putting a grid into an Mft top when I get around to making it! Thanks

@Yosser70 Жыл бұрын

Can you get those dog clips for Evolution tracks? On another not, having recently built a full MFT, I’ve found having some lengths of 20mm dowel very handy. I use it to make jigs or long stops on the bench, really handy.

@10MinuteWorkshop Жыл бұрын

No, the Evo rails don’t have the upward-facing t-slot , so you can’t attach them. And I use a length of 20mm conduit - works a treat and is a couple of quid a length. 👍

@sanyoshovah2887 Жыл бұрын

I've been working with plywood a lot but will have to use MDF on my next project. What type of sawblade do you use for cutting mdf? A cross cut blade to make super clean cuts or a rip blade to make faster cuts and reduce dust? I'm really worried a cross cut blade will burry my shop in MDF dust. I'm using a table saw, but I'm sure the blade type will be the same

@10MinuteWorkshop Жыл бұрын

Just the stock blade is fine in MDF - should give super clean results. 👍

@sanyoshovah2887 Жыл бұрын

@@10MinuteWorkshop cheers, thanks a lot

@chrislewis1371 Жыл бұрын

What can a mitre saw be used for making things etc

@richardstevenson2727 Жыл бұрын

👍🎅🏻🎅🏻👍

@10MinuteWorkshop Жыл бұрын

👍👍🍻

@peterprocter4334 Жыл бұрын

Hi Peter - some advice if you can please. I have a Makita and trying to make repeated accurate cuts on the “wrong side” using the method (edge guide) you are using at around 07:40 in your video. Find that at times the cut-off piece goes flying out the back usually damaged. I am using a fence and a sacrificial 6mm MDF under the work piece. It reminds me of the warning not to use the fence as an edge guide when using the Mitre on a table saw. (Kick back) Any suggestions would be appreciated.

@10MinuteWorkshop Жыл бұрын

If it’s the waste-side piece that you want to keep then you need a sacrificial strip taped or clamped to the benchtop to stop the waste-side piece moving; doesn’t have to be big, just enough to stop,it shooting away. 👍 HTH P

@peterprocter4334 Жыл бұрын

@@10MinuteWorkshop Thanks - will give it a stab

@gav2759 Жыл бұрын

I'm almost certain I remember my wife expressing an interest in taking up picture framing as time filler in her impending retirement. So Santa is bringing her enough gear to start her off...I know, I know, it is a high risk strategy, but I've had it with the barely concealed, perfume again, eye rolls. Wish me luck.

@10MinuteWorkshop Жыл бұрын

Nice! Hope it’s successful! 👍

@elguapo1507 Жыл бұрын

😁 Did you get her the Makita or Festool "framing kit"? 😉

@gav2759 Жыл бұрын

@@elguapo1507 Don't!....I might yet get that, just incase bottle of Channel, if my nerve fails me.

@elguapo1507 Жыл бұрын

@@gav2759 😂😂😂 You're a brave man Gav! 👍

@duncannel819 Жыл бұрын

Good morning Peter You cant sneek a new Mirka sander into a video without an explanation however brief. Didnt you know that that was against the rules? Happy Xmas from sunny South Africa.

@10MinuteWorkshop Жыл бұрын

Thank you! And best wishes from London! Don’t think this counts as sneaking though! 🤔👍Money, Mouth, Mirka [video 507] kzfaq.info/get/bejne/a750iLqCxLDTlKM.html

@dariushmilani6760 Жыл бұрын

Great presentation, however it would have been faster and easier if you made the rebate operation at the start with the long piece rather than repeating it 4 times ..👍❤.

@10MinuteWorkshop Жыл бұрын

No, you have much more control over a smaller workpiece if you do the rebates this way. But feel free to try it your way, if you think it’s better. 🤷‍♂️

@meperson Жыл бұрын

That would be better if you used router with rabbeting bit. With track saw alinging across very long distance is not going to be accurate.