Nice job Tim / Summit, I'm happy to see this finally come to the market.

💥 That’s a great solution for a multitude of tractors and quite reasonably priced. Thanks for sharing Tim! *Keep on tractoring!* 👍

Way to think outside the box, we appreciate all your thoughtful considerations on new ways to hook up our implements.

Great solution and provides so much more usability. “You can’t have too many hydraulic functions” and with the power beyond that is a slick way to get more of them. From the looks of the questions and comments Tim, I’m guessing we’ll see a follow-up on this as well. Super job Tim! Blessings.

Thanks for reviewing this option! It was like trying to read hieroglyphics when I was looking at this option from my now sold 1025R. Now I've got a bigger tractor with two rear accessories, and would LOVE to have a few easy to install diverters. Also, our rear accessory ports are detent (vs spring), so we could run a rig like this.

OMG, this is exactly what I need!!! Now the flail mower will have controls. Thank you so much for striving to "make a better mouse trap"! You truly represent American ingenuity! God Bless!

You proposed the idea of this could be a less expensive way to add the third function to the loader without the cost of the diverted. That made my ears perk up. I will look forward to hearing more about that possibility. Thanks for another great video. Stay safe. Bruce from Mason Michigan

I have been thinking how I could use power beyond for something like that, glad to see this is out now and I’m going to get one for sure.... Thanks Tim and crew :)

Amazing! Super excited about this. 3rd function front and three rears for not much more than you pay for just the loader 3rd function. The best part is, direct connect to power beyond! Love it! Thank you.

Looks nice and opens up a lot of different ideas. Good job Tim !

I got the Summit Diverter kit for the 1025R. I love it and look forward to possibly adding this to my Johnny. Thanks Tim & God Bless

Thanks for working to bring this solution to market. To me it looks like the best way to have the 3rd function for the loader.

Nice job on the video Tim! Appreciate your research and product knowledge that you continually share with us on this channel.

Nice set up. Good video Tim

Just placed my order for the power beyond and the 3 spool kit from Summit! So excited!

First seen this video six hours after it was release and thought it was funny that the four port is already backordered. Looks like there were a lot of meetings with finance departments this Sunday. My finance department said I should put it on my wish list. Was looking at my tractor a 2019 2025r I have the back hoe so I already have the power beyond. I might have to put the block on the other side because its already a squeeze to get up and sit down at it. Thank you Tim for this news it is a way cheaper alternative then anything else I've seen.

Great video as always Tim! I would be lying if I said your channel and videos did not persuade me in adding a 1025r to my fleet of green! Now with that said, I was a huge fan of your video with the 55 series tractor not too long ago. I have a 1995 John Deere 970 with 500 hours on it and I have in the last month had not one, but two diverted kits installed. One going down the loader and one out the back for a hydraulic top link. I would be absolutely thrilled to be a part of another “old vs. new” comparison on your channel to compare what an old 33hp gear drive tractor can do up against your newer equipment and attachments! Hoping to hear from you soon! Take care! -Jim

WOW TIM 👏 YOUR VERY TALENTED THANK Y'ALL ☆☆EVERY MORNING WATCHING YOUR SHOW ! SOMETHING NEW EVERYTIME❤STAY SAFE 🤗

That is an awesome solution. I commend you for coming up with it. Now I gotta go see if I can find a power beyond kit for my BX

That sort of makes me think of the loader tractor I grew up with. It was a Case 300 and there was a valve under your seat you had to open or close to change from using you loader or your three point hitch.....

great info Tim I wish this would've been available earlier(2 years) it would have made my addition of T&T much easier but, at least now I can point a couple of friends this way that want T&T on their 1025's

Outstanding on the extra wire on the controller. Will work perfect for a three point log splitter.

Instead of having the looped cable, you could have a standard length, with the connector. Then you could add an extension if needed.

So stoked to see this finally out. I messaged you on GTT about doing the setup on mine.

That was well thought out. I could use three. Top link snow blower spout turn. Spout flipper just for that. 4 I'm sure could find a use

Hi Tim an Christie thanks for the videos if you're working on a project without the right equipment you'll be getting this set up ASAP have a day love from TEXAS

I also bought a valve from Summit for my third function, which I mounted up front, and adapted a joy stick controller for the loader control. Summit has been very helpful. I am now using the re-usable hydraulic fittings and buy my hose in bulk. Even with the discount, custom hoses get expensive.

Tim that is an awesome set up.

Tim, I did the same thing with to get my 3rd function for a grapple except using the single switch. However I bought the summit manual dual valve which lets me switch from loader 3rd function to rear top link. I don’t use both at the same time after removing my backhoe. The beauty it I can use the buttons on the Summit loader handle for grapple or top link. Simpler for now and I don’t have a lot of attachments and I wanted to keep tilt and curl active.

Great idea. This video answers a questions for me. Thanks Tim for a very educational video.

Tim; This system looks great. I have a JD 3520 (2006 vintage) cab tractor that uses an electric solenoid diverter or to send the loader hydraulics to the rear. Then you use the loader control to function the two circuits at the back of the tractor. You have to use either the FEL or the rear circuits but they can not be used together. I am constantly flipping the electric switch to go between the functions either front or rear. I do have power beyond on the tractor. This looks like a way to achieve the rear removes and still have the loader at hand. Plus, with a top and tilt cylinders on the rear, the two extra remotes would give me the added hydraulic functions for my implements. This way I don’t sacrifice my top and tilt to get the implements powered. I just need to work up a mounting since I don’t have ROPS. Thanks, Chip

Got mine installed yesterday! Can’t wait to see your video

All of us have a gift of some kind to put a mark in this World. Tim I am blown away by your knowledge of the mechanics of how all this hydraulic system works. I'm watching you demonstrate this and still don't quite understand it. Thanks for sharing your knowledge. I'm not trying to blow smoke but I've never talked to a Tractor salesman at any dealership that had a fraction of this knowledge. Basically you are showing the depths of what a person can get out of their Tractor. I love it. In time I'm going to set my Tractor up with more features you are demonstrating. Thanks for sharing. Mark.

Great idea, looking forward to the install video.

Good stuff.....Sailors watching your channel will recognize the term "BOAT unit", after watching your videos for the past year or so, I think the term might also be applicable to tractors as in Break Out Another Thousand ! Love my 1025R John

Great video, but even better offer! I love the detailed install and/or technical videos! Thanks again!

Tim, thanks for all your good work! I’m a recent new owner of a JD 2025r, and would LOVE to have a hydraulic Top and Tilt for the box scraper!! Hope to see that coming in the future. Love your channel.

Good morning Tim. I have been waiting for this option. I think this is a great option. Couple things. The hoses look a little short. It looked to me that if you come straight down off the valve block then down along the bottom side of the lower bar over the the power beyond that would be a better route then the diagonal path it showed on this video. I also have two 2014 1025r one with and one with out power beyond we could put it on both of them. I read a comment about having a standard length wire and then selling an extension. That sounds like a good idea. Thanks.

As always very informative and can't wait to see your uses and different applications etc. Thank You for sharing!

Summit are great to work with. I needed 2 remotes for my snowblower and the electrical solutions seemed a lot for what I needed. I had one remote. I just needed a simple way to do a second. I spent maybe an hour on the phone with one person and then a couple emails to finalize a design with actual photos. My tractor is from 1968. The only thing I had to create was a bracket to hold the Summit product. Everything else I needed came from Summit in a "kit" set up perfectly for my application. Best of all, I can easily restore the 1968 original setup without any visible evidence. (one of the original holes holding the remote bracket had to be made larger to fit the bolt into the Summit block, but that larger hole is completely covered and does not cause any issues with the OEM bracket.) Best of all, my "solution" was under $300. While this is a great solution for people who have modern machines, Summit can certainly help create solutions for any need. Oh, and if you even think you might like a hydraulic top link, GET ONE. That has been a real nice addition when doing work with the land plane and offers a lot more utility to the boom pole. Even a slight change makes a huge difference. I can bet a box blade would respond even better. As for the hydraulic tilt, I can see that being useful, but not nearly as much. My tractor has a nice simple crank to alter the tilt and I don't tend to tilt very often. The only time I did was when I was cutting a new road crown. When buying your top link, pay special attention to the lengths and how much range you get. I went out with a "normal" top link and measured out several different models to see how they would work in real life. I ended up getting one that was a little shorter than most places recommended. Meaning I have more adjustment to make it shorter than longer. Why? Because I don't need much beyond level in the long direction, but making it shorter provides me a lot more lift on my Boom Pole when it is attached. Think about all your uses because $200 for a top link isn't too expensive, but you don't want to have to do it twice. Tim, looking forward to all the new equipment that you can operate with that setup. I notice some knobs next to each remote. Do they allow you to adjust the flow rate? If so, that is a fantastic feature that you didn't discuss. On my splitter, I can't set a different flow for my snowblower chute rotation and chute angle, so I compromise. The rotation isn't quite as fast as I would like, but it made the chute angle much easier to control Being able to adjust the flow rate on each remote would help to dial in the speed things operate since all you have is on/off on your setup. Neat Product from a great company.

Looks like you and summit did a great job. One sujestion I have is to make an add on kit that could be purchased. The rugged kit would include a shield (cover) for the wires and solenoids on the valve body, possibly abrasion resistant wire loom, and if the connectors are not already weather pack that could be a good option too. Looks like a very clean and well thought out package. 👍

What a great solution, Tim!! I might have to look at this for my 3520!

I already had power beyond for my back hoe. I bought an open center electric over hydraulic valve from Summit, and plumbed and wired it myself. I got inexpensive, waterproof joysticks on Ebay and placed them into a box next to my seat that is accessible from the drivers seat and back hoe seat. It works great. I have a hydraulic swivel blade on the back, and added hydraulics to the thumb on my backhoe. This does everything your setup does, and I did this before your system was available. I put the bulkhead next to the fender on the right side, where the ROPS connects to the tractor. I used Discounthydraulichose for the plumbing. I just can't resist a good mod.

I have to look my manual if I can installed some like that,because when using the post driver I have to someone inside holding the hydraulic lever so I can use the post driver so I can do it myself.Great video thank you for sharing

Great work Tim. I would love to have this on my 2038r but you was right the cost from Deere was just to much I now have to price this out for my tractor thanks for the video

Nice Vid Tim, I am glad my old 1026R has a horizontal PB, I can use my body weight to fasten them. The vertical ones are a bit of PITA.... Had those on my 379 Pete. The big one sold out fast....

If you have room you might put outlets for your 3 point cylinder on the bottom in stead of the top. Great solution for small tractors Thank you

This is AWESOME. Might have to take you up on your offer, but I’m not 100% sure what I need yet. A top and tilt would be cool for my rake or a box blade in the future. Using it for the 3rd function on the loader would be amazing too as it seems like a clean installation.

Wow, very interesting. That makes a lot of sense to me. Thanks Tim

Nice work Tim!!! I'd love to see more videos on how this product pans out and evolves!

This also looks like a great option for a DIYer looking for one stop solution to control a bank of hydraulic options, with a little bit of adaption it should fit anything. Thanks for sharing!

nice set up. nobody had one when i got my 1025 with backhoe in 2/20 , so i built one. its a 2 spool manual valves on the right. Built all new brackets and ammo box tool box. Put a T on one and ran 2 hoses to the front loader for my homemade grapple. According to my research summit forgot a tank dump line back in . probably will be ok. I re did the power beyond and made a hard attached line on each female quick connect. , one behind the seat and the other down in front of my left foot on the backhoe . it is much easier to hook and unhook than the JD factory configuration because my hands are not as strong as they use to be. Did not keep up with the cost but it probably was more , but it works great and it was a lot of planning and work. Summit and you will have many sales. I bought a 1025 because of your great videos. thanks

Very well thought out Tim !

Looks awesome! I got the "factory installed" dual remotes on my b2650.... looks like an after thought on their part. I would update to this in a heartbeat!

To address the extra cable length issue, just design it short, then have an optional intermediate extension to plug in between the connectors. Could even offer several extensions of different lengths. Boom. 💥

Saaaaweet! 👍 This is the first electric over hydraulic SCV solution driven from a power beyond circuit I've ever seen. A more typical "multiplier" solution (which Summit also sells) would require an actual rear SCV valve to drive the multiplier block, with each SCV enabled by a switch -you pick which multiplier SCV circuit the factory SCV drives. One thing you didn't mention, but I assume has to be the case, is that when no electric over hydraulic SCVs are being activated, the power beyond circuit is free flowing from its source to return, just as the normal power beyond bypass hose does when the factory power beyond circuit is not connected to a back hoe.

Interesting design Tim. One suggestion for the "extra" electric control cable would be to put a bracket on the bottom of the control box boom. You could wind the extra cable on that bracket.

Hydraulic 3-point hitch is slick!

Thats a very generous offer Tim. I brought a new J.D.3025 a couple years ago, and i ordered it with two rear remotes and two detent valves. Don't remember how much I paid but it wasn't cheap I'm sure.

Thank you for the great SCV solution and video!

Thanks for the info. That’s exactly what I’m looking for. Planning to purchase a kit this week

Morning Tim. Thanks for sharing this with us. Interesting solution. Have a great week!

I can see putting this on my larger tractor, a Kioti RX7320 as well. I have 3 rear remotes, but I want top link cylinder, tilt cylinder, and then a full compliment of adjustment cylinders on an Everything Attachments land shark 9ft rear blade. thats 3 more cylinders at least, even if I use a manual tail wheel. this looks pretty easy to plumb into most tractors that have at least 1 set of hydraulics. Great video Tim!

Back in my Lowrider days I had a valve block like that in my car with one pump. I could control each corner up and down separately. The setup was nick named a spider pump. Just sharing Ha!

I’ve been wanting an option like this for the top and tilt. Would love to take the offer and add it to my new 2020 1025R. I just need a few weeks before I can buy the kits. But if I can’t take the offer I can at least look forward to seeing the video and using it to guide my install. Thank for help bringing something like this to the market.

Thanks tim! Just purchased mine !

Love the setup Tim

Big Tim, Excellent job. That’s a great addition for sub compact owners. Your channel is a wealth of information for DIYers around the world. Take care. Sincerely, Dick Head

Tim this a product that most sub compact owners look at now it a really thanks mines orange must lookat size and then to place it God Bless All PaK

I did not realize it was that difficult to get remotes on one series. That’s a good solution The discount hoses website is definitely a good idea too because I paid twice that for the hoses I ran from my rear remotes up to the front when I first got my tractor tractor

Love it Tim! I also look forward to to more into on the front hydraulic option, A grapple sure would be nice on my property! Ps. Seat safety switch is bypassed. Great mod!

Awesome information looking forward on power beyond hook up install.

Great video Tim 🚜 I learned a lot from this video 🇺🇲💯

if i lived closer i’d take you up on your offer real quick! north east PA is a bit of a haul 😂

Great option for many tractor brands.

I should come out and have you do this, 3 pt log splitter, add angle to my back blade instead of manual adjustment, and a rear log grapple come to mind right away.

This is awesome! Grate idea Tim!

Nice option to have hydraulic versatility for various attachments to use on your tractor!

This is so what I am looking for! I have a branson 2400h with the backhoe setup the same as the 1025R. I'm gonna order the 2 spool and do a hydro rear top link and extend two lines for a grapple. Maye summit can come up with a way to extend one of the switches to the loader stick to control a set of valves for said grapple.

Nice great to see. Great work Tim. 👍

Your creation is the next best thing to factory. I added a hydraulic top link and believe all tractors should come that way. Until they do, we have you to thank for our rear hydraulic needs.

Very exciting. This is going to be a game changer!

The remote control - consider a Silo lift elevator and flood gates to fill the elevator or cut it off..... Lots of cool stuff. I have a diverter in the rear and that might be a ticket for something down the way. Cool indeed.

I am excited to see how convenient you can make this to run a grapple. Hard to spend $1,000 on this for the rear and another $700+ for the front diverter. Would be great to use this set up to run some hoses to the front with some sort of nice switch on the loader. I know you have something planned.

Great idea, Tim. There are times I wanted rear remotes on my little GC1710 Massey but thought it was going to be too difficult. Your system looks like a game changer. Thanks for the video and wishing you and family well. 👍🏽🙂 Excuse my ignorance, but I had to look up the acronym SCV (Selective Control Valve) which I think pressures the remote and designates how much flow goes to a particular line.

Very nice offer Tim to bad I can't get down your way as I'm up in Canada would love to meet you guys one-day anyhow God bless and stay safe my friend

Very interesting. Makes me wish I had a use for it.

Great innovation Tim!

There’s a lot of potential in that setup!

Absolutely Awesome! Lots of great 1025R Owners out there that deserve this opportunity! I’m excited to see who jumps on your offer! In my mind I’m thinking a super joystick 🕹 handle may be in your future (electric over hydraulic)...trigger for your grapple and eight other functions. Maybe with a twist function for left / right a four way thumb control and a couple other buttons...unfortunately it might cost as much as your kit... ~SBYD!

Summit makes quality products! I have the first solution Tim mentioned. It uses hydraulics from the loader. The nice thing about this solution is it uses the joy stick to operate the two rear remotes. Very easy to toggle from loader to each of the rears. I am really happy with this option. But I do see some additional benefits with this new option. It offers more rear remotes and uses fewer hoses to set it up.

endless possibilities. thanks for reviewing this.

Nice that you used my suggestion on one of you videos to manufacture my idea!

This is great! I have been contemplating a solution for my older JD 755 compact tractor for rear remotes. I need to figure out if this is compatible and I'm a buyer. This is a game changer in terms of what can be added to rear attachments. Nice work guys!

I think a small improvement would be momentary switches that spring back to the off position on the control panel. Im excited about the product. Cant wait to order one. Thanks Tim !

Tim, great job on this video. You may have just answered a question I asked on another video. I was really looking for something like this. And but for the fact that I live in NC would have gladly visited you with my tractor... oh.. but, I do not qualify for your offer since I already have the power beyond. Keep up your excellent videos. Thanks.

I wish I had my tractor now, I would be heading your way!

Looks good but like you said There is no room on these tractors to add anything. As a option is There a cover that can be purchased to cover the valves and maybe have a hinged door located on the hydraulics side for hook up access. There is a lot that can be done to make these little tractors work more efficiently and you just helped out. Have a Great Day, GOD BLESS

Do not need but KUDOS for the very useful accessory.

Very good video! Great design and solution!