Trailer Bearings | Boat Trailer Bearing Installation | How to pack Trailer Bearings

Trailer Bearings | Boat Trailer Bearing Installation | How to pack Trailer Bearings | Utility Marine

Рет қаралды 338,554

Күн бұрын

*Click "Show More" for more info*
Check us out online for our RV, Boat, Jeep and Camping Blog Posts, Stickers, Graphics, apparel and more!!
========================================
Check out our NEW Website for 2023!!
www.milehighcampers.com
========================================
Mile High Campers Etsy Shop:
www.etsy.com/shop/MileHighCam...
========================================
Our eBay Store:
www.ebay.com/usr/undercovertr...
========================================
Follow Mile High Campers on Instagram!!
/ milehighcampers
========================================
Bearing Seal & Race Punch: amzn.to/3bftPck
Lucas Marine Grease 14oz cartridge: amzn.to/2XdbXGK
Grease Gun for 14oz cartridges: amzn.to/3bdgscz
I got a great deal on a bearing kit at Pacific Boat Trailers:
www.pacifictrailers.com
In today's video we will be replacing the bearings, races and seals on a boat trailer. We will show step by step how to remove the hub, how to pack the new bearings, how to remove and install the new races and seal and reassemble the hub back on to the spindle. This process will work for boat trailers, utility trailers and travel trailers. We also will be showing how to check and fill the trailer buddy bearing saver system. Trailer Buddy is basically the same thing as the Bearing Buddy.
How To Pack Boat Trailer Bearings | Trailer Bearing Installation | Trailer Buddy | Bearing Buddy RV
Trailer Bearings | Boat Trailer Bearing Installation | How to pack Trailer Bearings | Utility Marine
PLEASE NOTE: Mile High Campers is NOT a professional mechanic or repair shop, nor are we sponsored or get paid to do this video. We are simply sharing what worked for us. Please do your own research and/or take to your vehicle to a local repair facility.
*We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Mile High Campers, All Rights Reserved
*This channel is for entertainment purposes only. We are not Certified Mechanics, Jeep, Boat, RV or Travel experts. We share our opinions and what has worked for us, but you should do your own research.

Пікірлер: 209

@Tamarinera23 3 жыл бұрын

This is THE BEST video explaining and showing how to change trailer wheel bearings. Nobody else talks about how to remove the inner bearing by pulling on the whole hub: ingenious! Also, you don't use fancy presses to get the races in and out: just simple tools and a work bench, like most of us have access to. I used a flat piece of wood to tap the sealer ring in, rather than the specialized tool you used. Thank you for a super teaching video.

@MileHighCampers 3 жыл бұрын

Thank you SO much for that comment, I really appreciate it!! My dad is a retired high school auto shop teacher so he knows all of the old school tips, I really like it when I can talk him into participating in a video!! Thanks again for the great feedback!!

@emersonpimenta68 11 ай бұрын

Thanks a lot mate, people like you helps people all over the world spending your day doing the service, filming, editing and posting. God bless you!

@andrewharris6579 3 жыл бұрын

Anybody that needs to do their bearings.... NEEDS to watch this. Its a great video. I especially love and appreciate your dads explanation on how to pack a bearing. Thats the right way to do it for sure.

@MileHighCampers 3 жыл бұрын

Thanks for the great feedback and glad you liked the video!!

@garyschwalm4842 2 жыл бұрын

Your Dad is awesome.... thanks for a great video and old school technology, simple tools, and a great instructor that demonstrates.

@MileHighCampers 2 жыл бұрын

Glad the video was helpful!! Thanks for the great feedback, I will be sure to let my dad know his old school methods are still appreciated!!

@hjs112 3 жыл бұрын

How in the world could anyone give this a thumbs down? This is a perfect step by step instructional video! Great job and thank you.

@MileHighCampers 3 жыл бұрын

I appreciate this comment SO MUCH!! it always blows my mind that people still find the need to hate on someone just trying to help people out for free, LOL. Best comment I have ever received, Thank you!!!!

@nonyabiz2777 2 жыл бұрын

Clearly your pops was a great teacher. Nice work. Greetings from Loveland Colorado.

@shannonharvey3448 3 жыл бұрын

Great video. Your Dad is a good instructor. Going to inspect my bearings now.

@MileHighCampers 3 жыл бұрын

Thank you! He is a retired high school auto shop teacher so he has a good background for this, I like when I can talk him into participating in a video!

@simp33333jjjj 2 жыл бұрын

I just got into the parts business and I just want to say thank you. You literally broke it down to a point to even a dumb dumb could understand

@MileHighCampers 2 жыл бұрын

Thank you!! I hope it helped all skill levels!

@SurfNTurf54482 4 жыл бұрын

Great tip from your Dad on tightening the nut all the way to get everything seated, then backing it off for final adjustment!!

@MileHighCampers 4 жыл бұрын

Thank you for the feedback, my dad is an OG when it comes to this stuff he will glad to hear his advice was helpful, thanks for watching!!

@jarialshurfield5696 3 жыл бұрын

Father son video great job. I finally got to see and understand how to pack the baring with grease.

@MileHighCampers 3 жыл бұрын

Thanks for the great feedback, I really appreciate it! I like when I can get my dad involved he is a retired High School Auto Shop teacher he has all the great old school knowledge!

@jarialshurfield5696 3 жыл бұрын

Yes I remember that video. The Bob Ross of that shiy.

@scottdahl3975 2 жыл бұрын

Yes, great vid. Watched it primarily for a perspective on reinstalling the hub and found it very practical. Great job and thanks!

@tomlucas8642 8 ай бұрын

Very helpful thanks! Old school dad 😉 greasing the bearing was the best! Thanks dad!

@CoyRanch24 4 жыл бұрын

Thank you. Exactly what I was looking for!

@MileHighCampers 4 жыл бұрын

Awesome. glad to hear the video helped you out, thanks for watching and taking the time to comment!!

@garyramsdale9340 3 жыл бұрын

Good video. HINTS Place race in freezer then use a block of wood on outside edge of race to hammer till the race is even with top of hub ( race goes in easier). Now use a socket that is just a little smaller than the hub opening yet makes contact with the race all around. Pound on the socket to seat the race in the hub.

@MileHighCampers 3 жыл бұрын

Thanks for the tip!!

@darthjar9117 2 ай бұрын

You can also use the old race. Cut a slice out of the old race with a grinder and pound it in with a block of wood. The slit in the old race ensures it will come back out easily.

@Benmelech 3 жыл бұрын

Best tutorial I’ve seen for this project

@MileHighCampers 3 жыл бұрын

Wow, Thanks for watching and taking the time to leave such a great comment!!

@richardelinskas6663 3 жыл бұрын

What an excellent video! Thank you guys so much. Exactly what I needed.

@MileHighCampers 3 жыл бұрын

Glad to here the video helped you out, and thanks for the comment!!

@otel680 4 жыл бұрын

May have been a long video, BUT that was one of the BEST educational videos I've ever seen, your dad did a great job. Simple and all steps were covered. My trailer has a leaking seal that I was dreading doing, not now. Thanks guys👍

@MileHighCampers 3 жыл бұрын

Awesome, thanks for the great feedback!! My dad is a retired high school auto shop teacher, I love it when I can talk him into participating in a video!!

@jonathancraig4296 4 ай бұрын

To me I saw too things. 1) Using a thin layer red hi-temp sealant on bearing seals. When done correctly, leave a nice red ring when excess wiped away after hammering in. 2) putting grease in the bearing buddies til maxed out. I have seen that cause more issues on boat applications than not. Pumping grease in until the blue indicator pushes out maybe half way to max is fine and prevents excessing pressure on seals when the hub heats up from travel. Otherwise, awesome video!!

@mikemental 2 жыл бұрын

Thanks for the video guys, something I had never done but your explanation made it easy.

@k9kayaks 4 жыл бұрын

Just ordered a Trailer Bearing kit 1” Spindle L44643 from Pacific Trailers They had exactly what I needed and great customer service explaining what I needed. Thanks again for the informative video

@MileHighCampers 4 жыл бұрын

Right on!! Thank you for the positive feedback!!

@dnjimenez1218 2 жыл бұрын

Freaking awesome brother you and your dad working together and actually explaining and teaching great work……A little old school techniques and New school……great job you guy’s

@MileHighCampers 2 жыл бұрын

Thanks for the great feedback!! I always like when I can talk my dad into participating in a video, the man is full of DIY knowledge!!

@stevep7517 5 жыл бұрын

Great instructions. I'm doing my trailer in the morning. Your video was very helpful.

@MileHighCampers 4 жыл бұрын

Thank you!! I really hope the video helped you out with your trailer!! Thanks for the positive feedback and thank you for watching!!

@sheenahanak5174 3 жыл бұрын

For real, thank you!!!! I don't think my trailer had been serviced properly before I got it and the racers basically fell apart they were so old. I was very confused how to put it all together, so thank you so much!!!

@MileHighCampers 3 жыл бұрын

Awesome, glad the video helped you out!!

@martygilpatrick9727 3 жыл бұрын

What a great video. To the point, no BS, well done!! Thank you. Hanna Trailer Supply in Wisconsin is also and excellent source for trailer and RV parts

@MileHighCampers 3 жыл бұрын

Thanks for the great feedback and recommendation!

@gregsteele9002 2 ай бұрын

The last person that owned my boat trailer apparently didn't Grease the bearings before driving 60 miles to deliver it to me, the outer hub on one of the wheels was so ground out from a failed bearing, that the new bearing race wouldn't touch the walls inside the hub. I had to grind the teeth off of an Old fashioned holesaw, and cut it to make a sleeve for the outer bearing race (the one next to the castle nut) to fit tightly. It worked great!

@jarrod5722 4 жыл бұрын

Great video, very well done. Learned a lot, just what I needed. Thank you

@MileHighCampers 4 жыл бұрын

Thank you for the great feedback, glad you found the video helpful!!

@chansebetts3579 2 жыл бұрын

Like father , like son , you two together made an awesome step by step video on the complete take down and rebuild of bearing/racer and seals replacement. There is no video too long when you are learning how to do something. The problems that arouse during the video was golden , because we the viewers would need to see what to do next under those circumstances. You, your dad and Jesus will be along side me as I tackle my hub bearing replacement project, ( the 3 wise men ) Thanks bro!

@MileHighCampers 2 жыл бұрын

Wow thanks for those kind words and great feedback!! Glad the video helped and good luck!!

@barrybebenek8691 4 жыл бұрын

Fantastic explanation guys. Thanks for posting this. 👍🏼🇨🇦

@MileHighCampers 4 жыл бұрын

Glad the video helped you out and thanks for taking the time to comment!!

@marciaewell2661 3 жыл бұрын

You made very nice video and I love that you got your dad to share his years of old school knowledge, like hand packing the bearings and how to preload and set the tension. I remember most of his tricks when I was young gal working on old drum brakes. I think these days it is important to use a seal, bearing and race installer tool instead of a steel punch as the punch will deform the metal. I remember using a socket or sometimes the old bearing, but so easy now to go to local auto parts store and get the free or cheap rental on the proper install tool to avoid damage to new parts. It is easy to misalign and ruin the seal, ask me how I know. I think it is always good to plan to check the tension on the bearings and to tighten up the manual adjusting brakes after a short distance as they will likely be loose after seating in from road travel.

@MileHighCampers 3 жыл бұрын

Thanks for the great feedback, I really appreciate it! I like when I can get my dad involved he is a retired High School Auto Shop teacher he has all the great old school knowledge!

@joshuabeck7131 3 жыл бұрын

Thanks, thorough video. Didn't leave me with any what if questions.

@MileHighCampers 3 жыл бұрын

Right on! Glad to hear the video helped you out!!

@MidwestOutdoorExperience 2 жыл бұрын

Outstanding! Thank you for a clear demonstration with helpful tips!

@MileHighCampers 2 жыл бұрын

Glad you enjoyed it!

@krichards8472 2 жыл бұрын

great video thanks , needed to know how to put it back together with out taking another wheel off. thank you for your video, and your Dads training

@MileHighCampers 2 жыл бұрын

Glad the video helped you out, thanks for the feedback!

@freeagentangler5159 3 жыл бұрын

Outstanding video, covered a-z!

@MileHighCampers 3 жыл бұрын

Thanks for the feed back, I appreciate it!

@klr7793 5 жыл бұрын

Very helpful. Now I know how to pack wheel bearings and I won't have to take my trailer to have it serviced. A real money saver. Thanks.

@MileHighCampers 5 жыл бұрын

Thanks for watching and the good feedback!!

@ericwright3382 22 күн бұрын

Great video, thank you! 4:02 to 4:08, maybe it is perspective, but doesn't look like it goes through the center of the spindle.

@garylcarrier 2 жыл бұрын

Excellent video!

@GuillaumeBaillargeon-pv2vs 21 күн бұрын

Thanks. Super useful!

@feeshermann726 2 ай бұрын

Fantastic Video!! Many thanks!!

@PapaDukesFl Жыл бұрын

Thank you and your dad. I learned a lot and will apply this to my boat trailer.

@MileHighCampers Жыл бұрын

Awesome glad the video helped!! Thanks for watching!!

@JohnHolser 2 жыл бұрын

Excellent detail!

@waynesalekin6773 3 жыл бұрын

Perfect! Thank you very much!

@MileHighCampers 3 жыл бұрын

Thanks for the great feedback!!

@claytonkeates2614 Жыл бұрын

This is a huge help thanks!

@alexaboutalipov3180 3 ай бұрын

the one of the BEST vidio ever. thx

@johnhsedgwick 4 ай бұрын

Super helpful- thank you

@rickamos2669 2 жыл бұрын

Excellent work,,,,, Thanks

@bethtempleton2631 3 жыл бұрын

Thanks!! I was kinda scared to beat the hub with a hammer but you eased my mind!

@MileHighCampers 3 жыл бұрын

Hope the video helped you out!!

@mf6847 Жыл бұрын

Thanks for the useful info

@Maults_Mayhem 2 жыл бұрын

Thanks for the video it was really helpful

@vintagetin2322 5 жыл бұрын

Great video, it's a lot of work but on a boat trailer that's in the water a lot it's critical. Good job.

@MileHighCampers 5 жыл бұрын

Thanks for the positive feedback!! Thanks for watching!!

@leonardwood8024 Жыл бұрын

Thanks for a very informative video.

@rickyarbrough7230 Жыл бұрын

great video

@brantleywest6640 4 жыл бұрын

Great video thank you.

@MileHighCampers 4 жыл бұрын

Thank you so much for the positive feedback, hope the video helped you out, Thank you for watching!!

@wyocoloexperience7025 5 жыл бұрын

Good tips, Dave!

@MileHighCampers 5 жыл бұрын

Thanks for checking out the video!!

@Okie-Tom 3 жыл бұрын

Very good demonstration!

@MileHighCampers 3 жыл бұрын

Thank you for the great feedback!!

@MuramasaMune Жыл бұрын

Very helpful video! But did anyone else hyperventilate when he tightened the nut with channellocks after all the great detail work??

@Mrscottyboy4 3 жыл бұрын

Nice job thank you!!

@MileHighCampers 3 жыл бұрын

Thank you, hope the video helped you out!!

@SavageAlaskan1 2 жыл бұрын

Thanks for the video awesome job

@MileHighCampers 2 жыл бұрын

Glad the video helped you out, & thanks for the positive feedback!!

@robertgoora 9 ай бұрын

thanks a lot fantastic explanations

@kenmccarthyfishing 11 ай бұрын

Thank you for the video,I did my bearings today and after watching your video I was having a hard time putting the outer cap on and realized I put a seal behind the larger washer,oops 😂

@petervargas8474 2 жыл бұрын

Perfect!

@MileHighCampers 2 жыл бұрын

Thanks for the feedback!!

@brianfletcher4356 3 жыл бұрын

Thank you ! Well done

@MileHighCampers 2 жыл бұрын

Thanks for the great feedback, glad the video helped you out!!

@Sjs58 2 жыл бұрын

Outstanding video, thank you

@MileHighCampers 2 жыл бұрын

Thanks for watching and the great feedback, glad the video helped!

@pahanin2480 3 жыл бұрын

Good stuff

@MileHighCampers 3 жыл бұрын

Thanks for watching!

@anthony2558 2 жыл бұрын

Very helpful. Thank you.

@MileHighCampers 2 жыл бұрын

Thanks for the great feedback, glad the video helped you out!!

@Muzikteechur 3 жыл бұрын

Great video, very detailed, and AWESOME that you could involve your Dad. Those old-school tricks like packing the bearings are an art and I'm glad to have seen it from a Master!

@MileHighCampers 3 жыл бұрын

Thanks for the great feedback!! Some times Old School is the way to go!! Thanks for watching!!

@mikehelms1537 11 күн бұрын

When taking out the back bearing seal you can take a 1/2 socket and hit it with hammer to get it out theback

@RVBarndominium 5 жыл бұрын

We had a boat a few years back but got rid of it before it needed all that done..🙄😏😮 Your Dad is cool! 😎

@MileHighCampers 5 жыл бұрын

Thanks, my dad is awesome and can he can fix ANYTHING!! He will be helping with the install video for "the project" if you know what I mean!! ;)

@RVBarndominium 5 жыл бұрын

@@MileHighCampers haha...great!

@seanbaxter1692 2 жыл бұрын

Great video

@MileHighCampers 2 жыл бұрын

Thank you for the great feedback!

@MyActionAdventures 5 жыл бұрын

Nice video. I need to do this on my flatbed trailer. I have a couple wheels that feel loose. Maybe when I get home from our 1 year Adventure. Never done it before. This video helped understand the process. 🤙🏽

@MileHighCampers 5 жыл бұрын

So I was watching another youtuber last month and he was triple towing and the bearing went out on his boat trailer and it caused a small catastrophe for him. So it was a huge reminder for me to check my trailers!! Thought it would make for a good video for people. I ordered a spare set of bearings to keep in the truck at all times, LOL!! Online prices much better than the Auto Parts Stores. Thanks for watching!!

@MyActionAdventures 5 жыл бұрын

My buddy had his horse trailer bearing lock up. Said the trailer jumped 5 feet in the air doing 65 down the road. Almost wrecked. Crazy things happen.

@MileHighCampers 5 жыл бұрын

Wow, that would be scary!!

@marcaustin 3 жыл бұрын

thanks much for this one brother

@MileHighCampers 3 жыл бұрын

You got it! Thanks for watching and the positive feedback!!

@andersonj1each26 3 жыл бұрын

My trailer bearing blew out yesterday, just ordered new hub assembly and a bearing buddy. NEVER done it before and I was kinda stressing until I watched your video! I’m ok at working on my truck and stuff so if I don’t have to take it in I’ll do it myself and this video has made me know I overthink this and I’m ready to replace both on my trailer. Thanks!

@MileHighCampers 3 жыл бұрын

Nice I hope it worked out for you!! Thanks for watching and based on your profile pic, Thank you for your service!!

@andersonj1each26 3 жыл бұрын

@@MileHighCampers thank you for your support! Yes it helped a lot made it super easy to do. Took me like 30 mins to do both wheels

@MileHighCampers 3 жыл бұрын

Awesome glad you hear you got it done!!

@CertifyThis 3 жыл бұрын

Very good instructional video.

@MileHighCampers 3 жыл бұрын

Thank you for the feedback!!

@alansmith2203 3 жыл бұрын

Thanks Fellas, well done. I especially liked the old school way of packing the bearings with flicking the bearing into the palm of the gloved hand and gobbling up grease and then reversing. Clever.

@MileHighCampers 3 жыл бұрын

Thanks for the great feedback, glad you liked the video!

@rafaelmarin1963 4 жыл бұрын

Good job.

@MileHighCampers 4 жыл бұрын

Thank you for the positive comment, hope the video helped you out!

@awalker83 4 жыл бұрын

Awesome video gentlemen! I feel confident enough to change the bearings on my trailer now

@MileHighCampers 4 жыл бұрын

Right on, glad to hear the video helped you out, good luck with you trailer!!

@leonbennett3190 3 жыл бұрын

Was very informative i have to do my jetski trailer bearings need replacing

@MileHighCampers 3 жыл бұрын

Glad it helped. good luck!

@MrRainbowrooster 4 жыл бұрын

Excellent video. Thanks

@MileHighCampers 4 жыл бұрын

Thanks for watching and the great feedback!!

@angelaratzay9034 3 жыл бұрын

@@MileHighCampersthank you thank you. Fantastic

@jonlittle346 3 жыл бұрын

Excellent. I will wait for more. More dad lol.

@MileHighCampers 3 жыл бұрын

Dads a retired Auto Shop teacher, he knows his stuff!

@PaulyV56 2 жыл бұрын

outstanding video

@MileHighCampers 2 жыл бұрын

Thanks for watching and the great feedback, glad the video helped!

@dynamitedmoney 2 жыл бұрын

Fantastic video thank you! Where did you get the lugs for your wheels?

@icheckraise 3 жыл бұрын

great video...if I need to replace a grease seal how do I know which one fits? I've damaged one I thought fit...can you buy the one compatible with the bearing and be ok? doesn't seem to go in easily is this normal?

@krichards8472 2 жыл бұрын

dam good instruction

@MileHighCampers 2 жыл бұрын

Thanks for the great feedback!!

@Laron53 Ай бұрын

Great video! Question: If the bearings(rollers) aren't seated properly after taking out are those completely damaged?

@lastresort1460 3 жыл бұрын

use the old race to hammer on to install the new race

@MileHighCampers 3 жыл бұрын

Great tip, Thank you!

@bonekollektor1659 Ай бұрын

Great video. So it's not necessary to fill the whole area between bearings with grease?

@theamerican7131 3 жыл бұрын

very good, PEACE

@MileHighCampers 3 жыл бұрын

Thanks for the feedback!!

@kansascityshuffle8526 2 жыл бұрын

So do the seals have to against the bearings? Will the cap push the outer seal in to where it has to be? Or should it be set first?

@tzampini 11 ай бұрын

Great video. However I have a trailer hub that has no indents to put a punch to knock the races out. There is literally no place for the punch to grab onto the race. Do you have any suggestions on how to get these races out? It’s on a Karavan SeaDoo jetski trailer. Thank you.

@brianmac1 2 жыл бұрын

Good video, really enjoyed it and great it showed the step many miss out, replacing the outer races. Only thing I'd say, my dad always taught me not to use a carpenters hammer for auto work.

@MileHighCampers 2 жыл бұрын

Thanks for watching and the great feedback, glad the video helped!

@johnnysalinas7082 2 жыл бұрын

I found there is a couple kits... how to know which is the right one?

@philliphall5198 Жыл бұрын

I reuse seal if not damaged Also install nut and hurl of will remove brg and seal

@iWubmusic 3 жыл бұрын

This is great and has an old school feel but in my experience you should we use a rubber hammer and deadblow on some parts or wood block

@MileHighCampers 2 жыл бұрын

That is a great tip, thanks for sharing!

@k9kayaks 4 жыл бұрын

Great detailed info. Was looking for info so I can check my kayak trailer. Is there any such thing as a waterproof bearing housing so I can back my trailer into the water? I bought it used and have been careful not to put the tires into the water. Thank you

@MileHighCampers 4 жыл бұрын

To be honest I'm not sure. These were the hubs that came with my boat trailer, but there is not really any difference that I could see that would make them different from any other trailer hub, except that these had the trailer buddy system, which can be added to any hub with the same diameter. My hunch is that as log as you have the bearings packed and use a marine grade grease you probably would be ok... but that's just my opinion, you may want to search around to see what other thoughts are out there on the subject. Sorry I could not be more help.

@k9kayaks 4 жыл бұрын

Mile High Campers thank you very much for the reply

@johnsellers9623 Жыл бұрын

I’m curious why you didn’t use the race and bearing tool on n the inside but you used it on the outside?

@Basshole51 3 жыл бұрын

awesome video! How do I know how to pic the right hub kit? I have a small boat trailer for my 1546 flat bottom boat.

@MileHighCampers 3 жыл бұрын

Check out this video, it might be able to help answer your question. kzfaq.info/get/bejne/iseajMaTs9WYYmw.html

@johnmcfarland4690 3 жыл бұрын

I've been using O'Reilly Super Lithium EP Moly Grease to pack my camper trailer hubs with a bearing buddy and the bearings appear to be OK (no wiggle room or noise when spinning the wheel). I've been using that grease for about 4 years based on someone's recommendation. It looks like I should have been using their High Temp Wheel Bearing Grease. Should I just continue using the Super Lithium or switch? If I switch can I just, can I just mix these greases or do I have to pull the hubs and replace everything? Thanks for the great video?

@MileHighCampers 3 жыл бұрын

Here is what the American Society for Testing and Materials says: "Specifications for two category groups: chassis lubricants ("L" prefix) and wheel-bearing lubricants ("G" prefix). Performance classifications within these groups result in two designations for chassis greases (LA and LB) and three designations for wheel bearing greases (GA, GB and GC). The automotive industry is in general agreement that the highest performance category, to date, in each group (LB and GC) is suitable for service relubrication." With that being said, from what I saw online, Super Lithium EP Moly Grease is service rated as LB. But you would need to check on the specific tube of grease that you have. LB and GC greases sound like they are different so I don't know if it would be a good idea to mix them. Personally I would go with the wheel bearing rated grease only. But by all means, do what you are comfortable with for your situation. Might not be a bad idea to do a little research to figure out exactly what the tube of grease you have is rated for.

@georgematos1086 3 ай бұрын

How do you know the size to get for the bearings?

@xSeadoggerx 9 ай бұрын

Shouldn’t you use a rubber mallet to knock the race back in instead of a hammer?

@tomhuynh7556 2 жыл бұрын

When you pump in the greases, make sure that the greases inside the hub and the greases from grease gun match. There are too many grease types and they may not compatible,

@MileHighCampers 2 жыл бұрын

Good tip, thanks for sharing!

@chiefer8368 3 жыл бұрын

So using a punch do put the race back in won’t damage the race??? Never done one bout to do my boat trailer. Seems like it would damage it or pit it up.

@MileHighCampers 3 жыл бұрын

If you had access to a press i'm sure that would probably be ideal... but that was a punch made for seal and race installation. Of course do whatever you are comfortable with doing, we were just demonstrating how we were able to do it with common hand tools, there are probably many ways it could be done. Good luck with your boat trailer!

@chiefer8368 3 жыл бұрын

@@MileHighCampers 10-4 I don’t have any of that I may have to buy a punch made for that as all I have are regular punches. If I can get away with using what I already have I’d be thrilled! Thanks for the video.

@MileHighCampers 3 жыл бұрын

If you decided to buy the punch kit here is a link to a fairly reasonably priced set that might work: amzn.to/3bftPck Good Luck, I hope it goes smoothly for you!

@chiefer8368 3 жыл бұрын

@@MileHighCampers thanks!