Man, the information you guys provide is priceless, if a tech has had some basic training, these videos can help so much with real world issues. Not just "this is how a piston moves".

Excellent demonstration. I didn't even know there was such a beast as a SINGLE wire network! I learned a lot just from this one video. Thank you for an excellent learning experience 👍🏻

Ive been missing trained by techs videos. Thanks for some more awesome content Keith.

That is one nice thing about GM. They had the foresight to add a splice point to test CAN. That should be a standard thing for all makes and models. Great diagnosis and explanation.

Great video Keith. One of the better videos I've seen diagnosing a network problem. I'll be sharing this video with my fellow technicians I work with. Thanks for the video Keith.

Nice job Keith. Thanks for taking the time to put that together

ASE wave has some cool stuff. That was a great visual when you added the pin connectors and the scope lit up.

Excellent learning video. I haven't seen any videos on class 2 networks. Usually just the can-bus. Much appreciated

Great Video Keith! Thanks for sharing!

Thanks for all the great videos Keith! I can't wait to attend some of your classes this year. Have a Happy New Year! Vito

Thank you so much! I have had this same issue with a 2005 Yukon XL 4x4 5.3. Have not yet found the issue, but I'm gonna order the U-scope and I'm confident I can find the problem with your excellent video with perfect directions on how to find the problem. Thank you so much!!!!!!

Terrific video sir, thanks a lot. This gives some great direction

Really clear and concise video. Great job !

This video is excellent, thanks for the detailed explanation Keith! Great video!!!

Excellent, thank you for sharing!

Great video Keith!

Hello Keith great video , was wondering what's in that bag you had in the video could you please make a video on what's in the bag and why you use them . BIG THANKS AND PLEASE KEEP UP THE GREAT WORK .

Great video and wow you guys from TBT are crazy good thx for your time

Job well done Keith. Nice process and a great video. Thank you sir.

Nice case study Keith thanks.

Great video. i have seen several AC panels get fried when installing a stereo. Wires fall into the top and short out on the circuit board. Bet it spiked the rear module on that one. Most customers will not admit that they saw a spark, or blew a fuse. Nice work.

Great video Keith. I had the opportunity to be at class with you and other great technicians at MTD, And you shared this video. I really appreciate the time that you guys invest on your videos to help us improve our skills. The only doubt I have in this case study is could the rear HVAC module be logic locked bringing the network down? But I’m pretty sure you had that covered. Thank you again for the great work.

Very efficient diagnosis. Thanks!

Excellent diagnostic process, thanks so much for the class, i appreciate a lot 👍🏻

Excellent troubleshooting Sir!!

AWESOME video, THANK you for sharing the knowledge, and please do post more great video's often, 🙂

Trained by Techs.. Awesome video. Nice job on explaining it. I just ordered the same scope from aeswave. Thanks for sharing it.

EXCELLENT!! Congratulations. Great video.

I appreciate all your vids ty!

Excellent troubleshooting ! Subscribed because of this video

great video thanks im digging that harness tool

Excellent video. Thanks 👍 👍 👍

That was super!! Finally starting to understand the concept that each wire or module adds or overlays another square wave onto the screen of your scope. The wires all basically come together. Am I right?

Great information here!!! Thank you.

👍 great stuff! Thanks for sharing my friend.

Thank you. Good information and explanation.

Nice diagnosis Keith and the AESWave PN is DECS-04 for the comb harness. It's not on their website yet to order it online but if they call they will take the order.

Great information and tool demonstrations too Keith. New to your channel and a subscriber. Look forward to seeing more. Thanks for sharing the knowledge. 😎 🍻 Cheers Kevin B. Extreme Motorsports

Absolutely brilliant method Thanks a bunch cheers !!

Very good example and explanation….

Nice, thanks, learned a lot!

Thank you Keith. Good job. Appreciate your videos. Do you have a part number or link to buy the break out leads you used in place of the comb?

great video, thank you for the tool tip from aeswave, just placed the order.

Great diagnosis.thanks

Great job explaining. Are there vendors that repair these modules like they do instrument clusters and Abs modules?

Super helpful!

Awesome video

Was great excellent teaching thanks a lot, The wires that you connected to comb from ase wave, will fit only to GM or any cars?

thanks i had no idea where to look for my problem

Fantastic video Keith voice over was great. What’s the name of that wire the drivability guys made and the probe you had on the end of the video on aux module? Thanks for this.. Jay

Just went after the network connector on 05 escalade..it was taped up to harness with a grey tape and super hard to get to. Thanks GM

Thank you very much sir. use full video.

I see since this was uploaded years ago still great information clear explanation but whether I did not pay attention or I miss it what or were can we find that tool on used on this video thanks in advance?

excellent very helpful

Brilliant Keith really enjoyed training session many thanks, sandy

Seems like a lot of guys can't even rewire a light pigtail. You will always have a job!

Loved tour video though

Want to get a little clarification on this one. IF one was to plug a breakout box and do this test the same way would we get the same result or does this comb affect the ability of the breakout box to be utilized and each channel be checked for activity one at a time without having to remove the dash panel and drop the OBD II plug from it's mount location. Not that it's a problem removing it from it's location. I also do understand that not everyone has a breakout box either. I did see another video as well, channel name hard if impossible to remember at this point. Anyways the person doing the video made a couple important comments about using the breakout box. First was being that as techs you never know what a customer did to the vehicle prior to receiving it that it could be a good suggested practice to use a B.O. box each time you connect that way you can always check for power and ground and the OBD port this having proper polarity and possibly preventing damage to rather expensive scan tools. Also it would enable the tech to check each network line without having to drop panels, creak necks around because you have the B.O. box installed this making the job possibly easier on the ol body. I'm sure some or many may chime in but please do so as each amount of information we get that's more clarified ultimately helps us all. Also is there vehicles that a B.O. box this will or won't work for and if so what would one look for to identify this capability when approaching this type of fork in the road. BTW love watching the T.B.T. videos and keep em coming!

Nice video.. I like how you go into detail on how things work. My question is that you said the pcm or bcm has to be hooked up to get that 7 volts but when you took the comb out you hooked up your leads one at a time and on the first one you probed into there was a 7 volt sqaure wave and that might not have beeb the bcm or pcm either. Could you explain what you ment and why you got the 7 volts on the first module you probed at comb.. If this makes sense to you what im saying

THANK,YOU 👍

Can a blower motor or other device on that auxillary hvac module pull it down like reference voltage does to other modules?

Keith, can this test be done with the vehicle off and the ignition on? My truck had the radio changed and is now reading unknown driver and will not stay running. It has many of the same symptoms as the trailblazer in the video ie no interior power. It will start but then shuts off after a couple seconds. 2004 silverado 2500 hd with the lly duramax. Thanks!

Oops. Should have read the comments below. Got the part number. Thank you.

Thanks!

Keith great video. Is that harness adapter just for GM vehicles or can it be used to do other testing. I own the U SCOPE and does it utilize the U SCOPES single channel connection point THANKS MUCH

Thank you...

Thanks for the information and for showcasing the uscope. Do you think the software on the uscope justifies buying it over a different mini 4 channel dso? I am trying to decide on a good scope given my limited experience it just seems like I would outgrow the uscope quickly but the software it has would be very helpful. Thank you for your videos I've been putting the information to use all the time.

I'd really like to learn more about the can bus systems namely how the ecu communicates with the bcm and subsequent modules

Great video. Question: are all the modules on class 2 network both receivers and transmitters? If so, are they always transmitting or only when pinged? Thank you in advance for your answers.

Thanks was geat

What's the name of the communication connectors near OBD port that Keith is inspecting

Are you positive that the PCM/BCM provide the 7 volt bias? Two people on IATN state that this not true.

Ummm mind if I borrow that tool? lol. Wonder if they rent these. I have a 2006 sierra 4.8 and after I went over some tracks and it got extremely sluggish..engine light came on and got the U1000 code along with p0449 and p0106...ordered the MAP and EEV valve..Been messing with it for days. Any tips?

how do i find a problem on a 2013 Malibu can high negative. the car cod is can a off line. it seems to be in the air bag and restrain. its not shutting the vehicle down it runs very well but it causing all kinds of other problems. false readings on the temp sensor and things like that

Keith, Great video. I want to do a GM Class 2 troubleshooting video for the members on the C5 Corvette Forum but unfortunately 99.9 % of members don't even have a scan tool and certainly not a DSO...I don't want to use my Picoscope, Scan tool or Can test box because that's not how they will T/S this problem...with a DVOM you won't see a 0-7 volt square wave anyway so how would be the best way to T/S for these guys ??...the C5 has 2 Star Connectors near the BCM so I guess remove the comb from one Star and see if the car will start...I think all of these data bus issues will be either "no start" or crank and shut down"....DeFazio did a '98 no comm a while back... if the Star is removed and the car starts I guess they could de pin each module data line and 1 by one install a pin and then install the comb until the car won't start...OR maybe just pull the fuse or fuses from each module until it starts. Thanks !!

So did changing the radio cause this or was it just coincidence?. What radio was put back in the car?

Now you need to open the module and look at the soldering joints and chips and see if you can fix it.

Hello Keith, I'm a little late here. I have a couple of questions. 1- where are you hooking up the leads on your scope, #2 pin on the dlc and ground? 2- if the pcm and bcm supply the 7 volts, how do you check the system with them removed from the network? Did I miss something?

where did you get little box and the wires you are useing ?

Keith would that comb connector also be called a gateway the connector which Keith Defazio often references and is it found on most vehicles or just GM. THANKS IN ADVANCE Artie 👍

Great video, but never assume body will have a good ground. Body has a bad ground, the door hinge or door check will be a poor ground. Connect scope ground lead directly to battery ground post or your scope pattern may be poor regardless if the signal is bad or good.

Great Video and presentation.. So the radio had nothing to do with the fault , If i tried explaining that to a customer ti wouldn`t go down too well :) :)

Is the pin tool compatible with any other oscilloscope?

hi, can u please provide a link where I can buy the scott connector upgrade kit. Thanks

Bro what do you call the devixe you are using that color red? Thanks

Can you provide the diagram for the splicepack? Going through similar issue.

I've been missing out, very slick tool. I went to aes wave and something is up with the website 🤔

By the way. Was it a coincidence the radio issue replacement caused this module to fail.

What about the radio? Still removed? Interesting that the radio install caused the fault?

I always use break arm for ground

Where can I find the diagram for sp205

interesting how these all talk on one wire yet they dont step on each other

Like!!!!!

U say 7 volts but your meter said 3.70volts ? Explain please

How is that connector called?

Audio is real low...

A backyard mechanic should not be on here But dammit I have a .5 parasitic draw And broke it down to the aftermarket radio And as it is a 05 GM style cluster I have a feeling the stock radio use to talk with it was off and on ..I am getting warmer anyways lol

it's "micro-scope", not u-scope .. :)

Its alot of thinking.. me as human being.. i get fix and forget about it... that stuff is not for heaven..

Uhg i hate bus