LIN Bus Explained | Everything You Need to Know about LIN BUS

LIN Bus Explained | Everything You Need to Know about LIN BUS | Local Interconnect Network

Рет қаралды 21,746

Automotive Diagnosis: Cars Repair &Training Guides

8 ай бұрын

In this video I explain the LIN BUS (Local Interconnect Network) in cars, I explain the basic of the LIN Bus and it's application in cars including the sunroof, power door lock, power window, rain sensor, power seat, parking assist system and so on. I also explain the difference between CAN Bus and LIN bus. I also explain the wiring diagrams of all these systems with LIN bus to show you how to find the LIN bus in cars and how to diagnose it.
You can also watch the following video for CAN-BUS and K-LINE Diagnostics:
CAN-BUS Explained | Everything You Need to Know About CAN-BUS | CAN-Bus Diagnostics & How It Works:
• CAN-BUS Explained | Ev...
CAN-BUS Explained (Part 2) | B-CAN Diagnosis | Test B-CAN with Multimeter & Oscilloscope:
• CAN-BUS Explained | B-...
K-Line vs LIN-Bus | K-Line Explained:
• K-Line vs LIN-Bus | K-...
Join the channel for more videos and more support:
/ @automotivediagnosis
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
#canbus
#LINBUS
#network
#carelectronics
#wiring
#wiringharness
#diagnosis
#diagnostics
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

Пікірлер: 74

@AutomotiveDiagnosis 11 күн бұрын

You might be interested in watching the following video too: LIN BUS Diagnostics | LIN BUS Communication Error | LIN BUS Waveform kzfaq.info/get/bejne/rZ10ksVqzq-pgZ8.html

@AutomotiveDiagnosis 8 ай бұрын

Also watch the following video for CAN-BUS Diagnostics: CAN-BUS Explained | Everything You Need to Know About CAN-BUS | CAN-Bus Diagnostics & How It Works kzfaq.info/get/bejne/mNype9teqJi8lqc.html

@Mohsen-mk3ud 8 ай бұрын

I love watching your videos

@AutomotiveDiagnosis 8 ай бұрын

Glad you like them

@user-ib2yo6wx3r 5 ай бұрын

The best video on youtube about Lin-bus

@AutomotiveDiagnosis 5 ай бұрын

Thanks my friend

@autolovers3446 8 ай бұрын

Absolutely perfect video

@AutomotiveDiagnosis 8 ай бұрын

Thanks a lot

@AbenezerManchlot 8 ай бұрын

Thank you, it was a good explanation!

@AutomotiveDiagnosis 8 ай бұрын

Glad it was helpful!

@jeffmech5948 8 ай бұрын

Thanks and looking forward for more videos about network.

@AutomotiveDiagnosis 8 ай бұрын

Sure thing 👍

@ravigarage8745 5 ай бұрын

Thanks for sharing your knowledge, really appreciated.

@AutomotiveDiagnosis 5 ай бұрын

Glad it was helpful!

@ochoamanuel5710 8 ай бұрын

...hello....thank you very much for sharing this video...

@AutomotiveDiagnosis 8 ай бұрын

Thanks for watching 🙏🙏

@robertmobileman8304 8 ай бұрын

great video thanks , much appreciated

@AutomotiveDiagnosis 8 ай бұрын

Glad you liked it

@Dean-ob7fg 8 ай бұрын

Amazing content and explanations

@AutomotiveDiagnosis 8 ай бұрын

Glad you think so!

@autokiaa9563 8 ай бұрын

Very informative

@AutomotiveDiagnosis 8 ай бұрын

Glad you think so!

@mauroaparicio1855 8 ай бұрын

very interesting video great information

@AutomotiveDiagnosis 8 ай бұрын

Glad you enjoyed it

@amarabdelli487 8 ай бұрын

Thanks for sharing

@AutomotiveDiagnosis 8 ай бұрын

Thanks for watching!

@jeremycameron6594 7 ай бұрын

Great video!!!

@AutomotiveDiagnosis 7 ай бұрын

Thank you!!

@matmechanic5909 8 ай бұрын

This series of videos about network is very helpful. In the other video you explained the powertrain CAN and also mentioned the Body CAN, I remember you said that diagnostic on these two CAN bus is not exactly the same, could you please make another video for body CAN diagnostics too?

@AutomotiveDiagnosis 8 ай бұрын

Hi my friend, thanks for your comment. Yeah, you’re right, diagnosing the body CAN is different from C-CAN, and I will definitely make a video about that.

@10malabdullah10 8 ай бұрын

Excellent

@AutomotiveDiagnosis 8 ай бұрын

Thanks my friend 🙏

@GregoryBirulkin 6 ай бұрын

Good video 👍

@AutomotiveDiagnosis 6 ай бұрын

Thanks for watching

@user-hh8tw1gf4n 8 ай бұрын

Great Job boss and very good information thanks allot please make next part for fd can for vw and audi and k line can for bmw please

@AutomotiveDiagnosis 8 ай бұрын

Thanks my friend. I'm very glad you enjoyed the video. I will do my best to make those videos ASAP.

@ramonsobrinho 2 ай бұрын

Obrigado 🇧🇷👏🏼

@AutomotiveDiagnosis 2 ай бұрын

Thanks my friend. I’m glad you enjoyed the video. Greetings to all my friends in Brazil.

@Hari-tw5fm 7 ай бұрын

Thanks

@AutomotiveDiagnosis 7 ай бұрын

👍👍

@user-ld2us7iv5g 8 ай бұрын

❤❤❤❤❤

@AutomotiveDiagnosis 8 ай бұрын

Thanks my friend 👍🌹

@mohsenmohsen8514 5 ай бұрын

Thaaaaanks

@AutomotiveDiagnosis 5 ай бұрын

👍

@kristalydaniel3113 2 ай бұрын

Thank you very much for the video , why dose the network loses cominication with the Bcm and the Cluster panel? Is it because of a short to mass somwere in Lin network?

@mikechiodetti4482 5 ай бұрын

I'm a little slow getting to your video about the LIN-BUS. Thank you for this information. I'm currently retired, however my 06 Nissan Frontier and my 2020 Toyota RAV4 both have these systems and of course the High Speed CAN C System. I'm sure the Toyota has another type of system that's Toyota's own, and hopefully I can get to testing these systems on both vehicles. I do have an older Pico Scope and an XTool D8BT Smart Diagnostic System tester. You really need a scope and a good diagnostic tester now to be able to test these system. Just having a Digital Multi Meter isn't enough.

@AutomotiveDiagnosis 5 ай бұрын

Hi there, thanks for sharing your experience. You are absolutely right, Picoscope gives more information when diagnosing the CAN/LIN bus, this video was an introduction to LIN bus, we will have more videos coming for testing the network via a Picoscope.

@barniep 10 күн бұрын

Could you please make a video, of the settings, in your Launch scope

@mikeadler434 2 ай бұрын

👍👍

@AutomotiveDiagnosis 2 ай бұрын

Thanks for watching

@mattuneup1502 8 ай бұрын

Thanks, is LIN used to communicate with scan tools too?

@AutomotiveDiagnosis 8 ай бұрын

Hi there, normally K-Line and CAN BUS are used for that purpose.

@medch4193 8 ай бұрын

Hi sir on some kia models like sorento um they both "B can" and lin network in the power window system what i want to know is does the lin network replace the B can network when the later is having a problem or support it in someway

@AutomotiveDiagnosis 8 ай бұрын

Hi my friend, yes, if both units are connected to B-Can and LIN at the same time, at normal, they share different information, but as soon as one of them gets faulty, the other one can work as a backup. But KIA and Hyundai have been trying to reduce their he number of networks in one module as well, specially on body electrical systems. Because B-CAN behaviour in wiring fault is way different than C-CAN, as normally on B-CAN if one line gets shorted the other one will still be working.

@medch4193 8 ай бұрын

@@AutomotiveDiagnosis thank you so much sir for the clarification

@jocelynantoinette4108 8 ай бұрын

Hi sir. Is there a need of a power and ground for the system to work?

@AutomotiveDiagnosis 8 ай бұрын

Hi my friend, they are provided to the control units or components separately

@jocelynantoinette4108 8 ай бұрын

@@AutomotiveDiagnosis Thank you sir 👍

@kahloonzak 8 ай бұрын

Can you please explain that my car will not connect to state obd but it connects to the scanner no problem. I am told that it could be can network problem. If that is the case with you make a video

@AutomotiveDiagnosis 8 ай бұрын

Hi there, if CAN bus is down, normally you won't have connection between the scan tool and multiple systems. Anyway you can watch the following video which explain the CAN bus diagnostics: kzfaq.info/get/bejne/mNype9teqJi8lqc.html

@patrickblatter2548 6 ай бұрын

how many nodes are in one network possible?

@mwangigateiyu1570 8 ай бұрын

What is the difference lin bus and k-line bus network?

@AutomotiveDiagnosis 8 ай бұрын

They both use only one wire to communicate, they are both one Master- multiple Slave network, but L-line is designed for diagnostic tools communication with control units.

@mwangigateiyu1570 8 ай бұрын

Okay ,,, how do you identify k-line network in a control unit 🤔

@AutomotiveDiagnosis 8 ай бұрын

Normally each K-Line wire starts from a control unit and ends up in OBD2 connector. You may see more than one pin for K-Line in OBD2 connector.

@mwangigateiyu1570 8 ай бұрын

Thank you for the information 🙏

@AutomotiveDiagnosis 8 ай бұрын

@@mwangigateiyu1570 👍👍

@user-tk9vs8bx4g 6 ай бұрын

I have got lin error fault

@AutomotiveDiagnosis 6 ай бұрын

What is the code?

@johnkaplanian 8 ай бұрын

Dear Sir, Just FYI, I believe the purpose of such networks is to facilitate hackability to the vehicle, and not at all to decrease the amount of wiring.

@AutomotiveDiagnosis 8 ай бұрын

Well, that’s one interesting point 🤔☺️

@dewilliams2012 7 ай бұрын

That's definitely an interesting opinion. LIN BUS definitely decreases the amount of wiring and control modules. If everything on modern vehicles ran through the CAN BUS, a $40,000 vehicle would cost $70,000 or more easily. Also, diag would be much more difficult.