Рет қаралды 45,821
2007-2013 Toyota Tundra 4x4 transfer case oil change (see notes below for 2014+). Way cheaper than taking it to dealer! Easy for the novice home mechanic to do.
Amazon links below to products used in this video (this video was not sponsored or compensated to promote certain products in any way, but if you end up buying something through one of these amazon links I'll get a small commission paid by the seller through Amazon.)
Lucas 75W-90 Synthetic Gear Oil: amzn.to/2LxJjeX
15/16" six point socket: amzn.to/2LxJjeX
Toyota sealing washer set (enough to do both differentials and the transfer case): amzn.to/2Xe4mtR
10-pack of just the aluminum washers: amzn.to/302me8b
2014 or later truck that calls for 75W? I haven't personally used this, but I've heard it works good and is waaaaaay cheaper than going to Toyota and buying their oil (Ravenol 75W oil): amzn.to/2NyGRYf
2007-2013 Toyota Tundra 4x4's are spec'd to use 75W-90 gear oil in the transfer case. But in 2014 Toyota changed to a BorgWarner transfer case that calls for straight 75W oil. Straight 75W and 75W-90 are two different oils. If you have a 2014 or later truck you need to do your own research, verify, and put the right oil in your rig. (Don't trust the dealer either; verify what they are putting in your truck if you have them do it.) Here are some links to forums threads on the topic you may find helpful:
Tundra Talk: : www.tundratalk...
Tundras.com : www.tundras.co...
Transfer Case drain and fill plug sealing gaskets (washers)
Toyota Part No. 90430-A0003 (Replaced old part # 90430-18008)
Torque specs:
Transfer Case Drain and Fill plugs: 27 ft.-lb (or 37 Nm)
Transfer Case skid plate and shield bolts: 13 ft.-lb (or 18 Nm)
Oil info:
2007-2013 Toyota JF1A Transfer Case oil Capacity:
1.2 (+/- 0.06) quarts (or 1.1 (+/- 0.06) liters
Viscosity: SAE 75W-90