Transform Your Harley Davidson Road Glide Or Street Glide Into A Like-new Ride!

Рет қаралды 21,441

23 күн бұрын

Update Your Harley Davidson Road Glide or Street Glide To Look Brand New!
I've been waiting for this for a while. ‪@Advanblack‬ is just about to launch their brand new fender and saddlebag combo that can be used to update the rear section on all 2014 and newer Road Glides, Road Glide STs, Street Glides, Street Glide STs, Road Kings, Electra Glides, Ultra Limited, and Ultra Classic to have a more modern performance bagger look. I got the first set so that I could put it on their 2023 Road Glide ST that I have. I will be rolling around Sturgis on it if you want to see it!
#harleydavidson #promonkeynation #roadglidest #performancebagger #roadglide #streetglide #ultralimited #sturgis #roadking #chopper #harleydavidsonmotorcycles #biker #kingofthebaggers #motorcycle #custombagger
Join this channel to get access to perks:
/ @professionalmonkey

Пікірлер: 89

@lonecowboyadventures 20 күн бұрын

In the end, that bike did look good with those cut outs.. it will be interesting to see the tank when you get that on

@danielworsham5609 20 күн бұрын

LMAO, I know why I like you so much. You sound exactly like me. "I figured out everything I did yesterday was wrong so I got pissed off and went inside" is EXACTLY what I would do. If I don't take a break I'll keep screwing around until I break something.

@ProfessionalMonkey 20 күн бұрын

Right? You gotta step away, that's all there is to it.

@cormac7679 21 күн бұрын

Just found this channel 2 day ago and i havent stopped watching them since. Brilliant.

@ProfessionalMonkey 21 күн бұрын

@@cormac7679 thank you!

@Kenn1969 21 күн бұрын

Another professional, unprofessional video by you!! Love it!✌️😇👍

@mberdoo88 20 күн бұрын

Looks great, the only thing that looks "wrong" to me is the bottom of the fender not kind of matching the length and angle of the new lights and bags

@homegrownson 21 күн бұрын

Glad you made it thru another day of Florida Heat & Humidity, heading to Surgery on the 16th so will be offline for up to 2 to 3 weeks as mandatory 10-14 days or more hospitalization after Whipple Surgery. Keep the Rubber Side Down and Enjoy Sturgis for Me

@ProfessionalMonkey 20 күн бұрын

You take care of you, bud. We'll see you when you're all recovered!!!

@homegrownson 20 күн бұрын

@@ProfessionalMonkey Going to try and make Forgotten Angels 10th Anniv Party in October, so I can be there when they raffle off Bikes and my Guitar.

@freedomforall1602 21 күн бұрын

That's a big No on the side covers, they look like they don't belong. I do like the cutins on the saddle bags. I'm not much for trying to strip down the fender though. I like the lights on the bottom of my 2015 fender. To each is own though. Cool of Advan to be designing alternatives. I do have a few of their products on my bike.

@SCVMoto 21 күн бұрын

Another great video. I am not a fan of the side covers. They just don't look good on the bike.

@jkjmmat 18 күн бұрын

Tee shirt neckline on day 2 looked way better 👍

@Ridingon3TN 21 күн бұрын

looks good..I do like those connectors as well way more sturdier especially with those tiny led wires..

@coyote4936 20 күн бұрын

I like the 19” bronze front wheel a lot. Looks more performance than 21”

@ProfessionalMonkey 20 күн бұрын

Agreed.

@Jake_B74 21 күн бұрын

I like the license plate holder where the nuts are the LED's. I don't know if they could make it work, but what if the LED's were like a stud you put the licence plate through, then the light hood that directs the light down is the nut... Just a thought on that, to avoid the need to thread the wires through the plate. Overall, it's a very cool look.

@barryking9570 21 күн бұрын

Monk, can you make a short or Instagram video showing the tombstone lights on?

@jbs5693 21 күн бұрын

I believe you could have a problem with the law with the tag being that high up on the fender if you had the tour pack on. Looks like it would make the tag hard to see the tag. I think the curved tag bracket down lower would look better on it . But just my opinion. Thanks for another great video.

@sarge29477 21 күн бұрын

To each their own, but I am not a fan. I don't mind the angles, that part is cool. But the license plate bracket placement is a no for me. And the side covers are supposed to COVER things. Like the frame bolts. Off to a good start, but certainly needs some tweaks in my humble opinion.

@pastorbobncc365 21 күн бұрын

Northern California 114 degrees, have a blessed week my friend.

@Mrsmonkey5151 20 күн бұрын

It was 104 here the other day 😢 stay cool

@scottfowler5417 21 күн бұрын

I dig the hell out of it all. The side covers are on the list for my 2018 RG for sure. I wish they would make a tank cover that wasnt stretched tho...

@ProfessionalMonkey 21 күн бұрын

@@scottfowler5417 they were going to do that but then decided to do a whole new metal tank. It’s coming right now.

@jameshefferman6492 17 күн бұрын

Run a tour pack on my 23 ST. Need the storage lol. Bike looks great. Will see you guys in sturgis

@travisfreiwald9436 20 күн бұрын

I believe harley calls those lights keystone lights & most everyone else calls them filler lights. Tombstone is i believe similar to the style thats originally on that bike but is in the shape of a tombstone. Mite come on the Softail Deluxe i think. Just my 2¢

@grumpyoldretiredcop8382 21 күн бұрын

That does give the bike a different look that I like. Not sure I want to have to clean under that license plate holder, or about the lit bolts, though. I know how you feel about the heat... 107 in my garage this afternoon. Good, entertaining video!

@marvin-the-martian5194 21 күн бұрын

NE Nevada: 99 deg F and 7% humidity. My valley is 5500 ft elevation.

@paulbarber4892 15 күн бұрын

I will buy them. We are doing a build they could work for. 👍

@user-wt5qw8cd2s 20 күн бұрын

A color matched curved license plate frame with the leds built in, would give it a nice finished look.

@haroldblanton1555 20 күн бұрын

Great look!

@maverick91211 15 күн бұрын

@professionalMonkey I use those solder shrinks all the time at work they are handy for sure. Not sure how you go about securing them, I got tired of trying to hold both wires just right and basically decided to turn each wire into a hook then slide the shrink over the hooks. If that makes any sense lol very helpful in tight areas thats for sure.

@ernestoluzan 21 күн бұрын

@professional monkey… I have the same JS Jack. Got mine used on FB market place for 300 bucks which I feel is a steal for what it is.

@j.foster1560 21 күн бұрын

I have that jack also it was expensive but worth every penny.

@Bill-NBfarming 21 күн бұрын

I’ve run those license plate lighted bolt for a few years. They aren’t very reliable. Got another one starting to flicker now. PIA to change them out. Can’t find a plug in connector small enough to fit thru the bolt hole. Have to solder connect them.

@paulbarber4892 15 күн бұрын

Looks cool. You did it!! I need the parts you took off for a bike I am doing. 😊

@ProfessionalMonkey 15 күн бұрын

@@paulbarber4892 I’ve got em!!!

@inthegaragejoe 21 күн бұрын

Incase nobody thought about it but my advice is the led lights for the plate is a bad idea coming from a state that license plates are periodically changed either because the state changes plate every few years or the plate needs changed for ownership. My state the plates stay with the owner not the vehicle.

@ProfessionalMonkey 20 күн бұрын

Good point. I am going to switch it for the lit plate frame.

@daveyd4000 21 күн бұрын

It does look good. I like the new tag bracket. instead of those lights going through the tag. Why don't you just put A light on the bottom of the Tag bracket. Then you could just use regular bolts to hold the Tag on. I think the professional monkeys logo would look better on the top of the seat. Then versus the side. Just my opinion.

@Xi_Cano 21 күн бұрын

Nice!

@O-Ring11 21 күн бұрын

Hell yes! I new it was coming.

@joedigusto2174 20 күн бұрын

Hell yeah, looks good

@AmberWhiskeyRGS 15 күн бұрын

Bags look great, side covers, na. Yes, the look grows on you and doesn't look bad at all.

@kylepelletier6590 18 күн бұрын

I do like the bags and fender. I’m not sure if I like the plate bracket or the side covers, but overall looks good

@mikeystavaros9448 18 күн бұрын

Def not my style but I’m all about seeing what options s be out there. There’s something for every style. 👍

@chopshopchopper 22 күн бұрын

Tease...❤

@dinggus 21 күн бұрын

I'm down to buy the rear, just hope we have a choice to not have those indents in them. Are you doing meet and greet in Sturgis?

@ProfessionalMonkey 20 күн бұрын

Sure am, we'll be at the Cycle Source bike show all day on the 4th at the Iron Horse.

@johnhoffman3598 21 күн бұрын

Bags yes the side cover doesn’t work for me. I’d rather see them more molded in just my opinion.

@carlmccoy5146 19 күн бұрын

Thats the last thing i would do😂

@coyote4936 20 күн бұрын

I like the rear suspension. Do you know if they make that type for sportsters? Thanks. Good video

@ProfessionalMonkey 20 күн бұрын

I'm not sure, Ohlins makes a ton of stuff, even shocks for Honda Groms. Go check the site.

@scottme6615 21 күн бұрын

You didn't show them lit up

@mendopops 20 күн бұрын

If an HD touring bike has the cool-fan accessory installed on the right side, behind the rear cylinder, will the new right side cover still fit?

@ProfessionalMonkey 20 күн бұрын

It should cause it's actually slight smaller than the stock one.

@shawnkemble4668 21 күн бұрын

Storm trooper

@donzollars8187 21 күн бұрын

Are the hand guards Advan Black? I want a set for my 21 RG limited.

@ProfessionalMonkey 21 күн бұрын

@@donzollars8187 yup. They’re on the site in either carbon fiber or painted to match

@derfskittlers6125 20 күн бұрын

I really like the bags but not the side pieces. It's too much. Will the old side covers still work. You are spot on with the curved plate frame. Moochus more bettero!

@kevinh7982 3 күн бұрын

Can you run a tour pack with the ohlins resivors?

@ProfessionalMonkey 2 күн бұрын

Yup

@chinocochino7685 20 күн бұрын

Which ohlins are you using

@ProfessionalMonkey 20 күн бұрын

I'm not sure since Alan sent them to me. I think they are the standard ones?

@timphilmon8573 18 күн бұрын

What brand jack stand are you using ? Does the hard wheels roll easy with the bike ?

@dshirk67shirk49 17 күн бұрын

Just my opinion, but I think the 23s look better than the 24s

@trez2187 18 күн бұрын

Go in the hole DAMMIT! (20:54min mark) That triangle thingy so close to the exhaust won't melt, right?

@user-lz1qo5lh9s 19 күн бұрын

plate is to high

@oldasfolk-km1ov 20 күн бұрын

only people who trailer their bike to Sturgis want their old bike to look brand new 🤣😇

@Mrsmonkey5151 20 күн бұрын

😂😂

@ProfessionalMonkey 20 күн бұрын

I haven't figured out how to get three bikes there with one rider yet...

@oldasfolk-km1ov 20 күн бұрын

@@ProfessionalMonkey its all in good fun bud, just some joking. I'm sure you know that though....

@RobAshton44 21 күн бұрын

The new harley bags are hideous

@Mrsmonkey5151 20 күн бұрын

Shaped like a boat. Don’t care for them either.

@dnice4431 18 күн бұрын

I like a lot of advan stuff. This is a miss in my view. Don’t like the bags the side covers or plate. But the tomb stones are nice.

@arleyrisner204 20 күн бұрын

You couldn't have picked a more boring blah color to showcase new parts/look on.

@ProfessionalMonkey 20 күн бұрын

I don't disagree, but its the ST color so I think they wanted to show the color match. I also didn't have time for a total rebuild right before Sturgis.

@arleyrisner204 20 күн бұрын

@@ProfessionalMonkey I enjoy your channel. I'm a DYI too. Keep doing what your doing people love it.

@lawrencefranck9417 19 күн бұрын

🤦‍♂️things people spend money on….

@MrWacopilot 21 күн бұрын

The new bag look stupid with the back corner chopped off

@ProfessionalMonkey 21 күн бұрын

@@MrWacopilot so don’t buy them.

@carolinarider5237 20 күн бұрын

Not a fan at all.

@paulhall8027 20 күн бұрын

Brother, you have literally went from an entertaining channel to an Advan Black commercial. I understand the sponsorship, but really?

@ProfessionalMonkey 20 күн бұрын

So obviously you haven't been watching. This is the first Advan video i've done in a while besides the tour pack rack. And for the millionth time, they don't pay me anything, I just like the stuff. A bit of advice, next time you want to disrespect me, don't start with "brother."

@paulhall8027 20 күн бұрын

@@ProfessionalMonkey That’s not disrespect. That’s feedback. Your content prior to sponsorship was superior. Not all compensation is monetary. Sometimes it’s free parts to showcase new products on a regular basis. Maybe even a long term loaner bike? Lastly, don’t be offended over the brother comment. I’m southern. We use it pretty often as a greeting to other males.

@mikeystavaros9448 18 күн бұрын

It’s their bike. He’s said it a sht number times. They’re gonna showcase what you can do with it. Don’t like don’t watch. Is it everyone’s first day o. the internet?😂

@ProfessionalMonkey 18 күн бұрын

@@paulhall8027 it’s shitty to come at me like that. I’ve spent that last several months building a bike by hand and this is the bullshit you have to say?