TRANSMISSION LEAKING FLUID FROM FRONT PUMP SEAL, OR NOT?!!

Рет қаралды 127,290

THIS IS YOUR TRANSMISSION

4 жыл бұрын

Don't forget the rebuilt torque converter!!!

Пікірлер: 128

@blakeywsr59 4 жыл бұрын

Wow, I understand the frustration, however your troubleshooting skills are on point, thank you for sharing your knowledge and experience.

@RC-qf1et 3 жыл бұрын

Nice video, very informative and true. One less thing to wonder for me, thank you!

@korn111685 Жыл бұрын

I can’t believe it, I guess I got to I’m looking right at it. Thanks for a handy tip!

@thedudeaaronfyi 2 жыл бұрын

I will be pressure testing every single TC I install from here on out. Thank you for sharing. Your helping people for sure!

@thisisyourtransmission 2 жыл бұрын

Welcome

@chickenhauler02 3 жыл бұрын

Would never have thought to pressurize a convertor for leaks. Good stuff

@repeatagain1789 4 жыл бұрын

Very Smart Sir that is a new one wouldn't expect that kind of nightmare from a factory defect that would come to haunt you! thankyou very much for sharing 👍

@thisisyourtransmission 4 жыл бұрын

welcome

@Dave-id6sj 3 жыл бұрын

This makes my BTR repair so much easier, going to put a seal kit in and a reco torque converter, thanks for showing us this, good job mate.

@thisisyourtransmission 3 жыл бұрын

No problem 👍

@russellstephan6844 Жыл бұрын

Very nice presentation. Thanks for taking the time to share your expertise and experience!

@thisisyourtransmission Жыл бұрын

welcome

@chriswatts2096 3 жыл бұрын

Thanks for teaching me something new, I’m looking at a leak on my moms grand voyager where it meets the engine. It’s going to a shop. Too much work for me at home.

@scottcampbell2836 4 жыл бұрын

Damn sh a rp eye. And good troubleshooting too

@bobbond9730 4 жыл бұрын

That’s a great catch. 👍🏻 also like your homemade air tool.

@thisisyourtransmission 4 жыл бұрын

Thanks 👍

@johnnyjohn8073 2 жыл бұрын

What an invaluable lesson my friend. I'm about to install my 5.0 engine on my 1989 Mustang convertible, engine that I rebuilt myself that I know, no shop could do such careful work. But it dawned on my this morning before installing the engine, to replace the seal on the my AOD transmission. It's the front tranny seal, the one that actually goes into the front pump. I'll be replacing the rear tailshaft seal also. As for the front pump seal, I'm debating whether to use a ford OEM seal or a FELPRO, perhaps TIMKEN. If I use a FORD OEM seal, I have to order it at my local FORD dealership, which means I can't install the engine today. I shouldn't have anxiety over postponing installing the engine since I do have my primary car. Then I came across your video & glad I did because now I gotta head out to Home Depot & Harbor Freight to make a similar tool like yours to test the torque converter since the engine and tranny have been sitting for 5 years before I rebuilt the engine last week. Better safe than sorry. Thanks for this invaluable video, I have no idea why 33 idiots gave your video a thumbs down/dislike.

@thisisyourtransmission 2 жыл бұрын

You are welcome

@whitefreeman5798 3 жыл бұрын

great video .. thank you for sharing your knowledge

@briankoundry3401 3 жыл бұрын

I just saw your video I have an Audi A4 with. Leak in the bell housing it is usually the pilot shaft seal but now I know how to check the torque converter also thank you so much brother

@thisisyourtransmission 3 жыл бұрын

Welcome

@CCROSS5882 2 жыл бұрын

you would think the re-builder would pressure test it before giving it back, Nice Vid

@suewatson1912 2 жыл бұрын

Thank You for sharing your knowledge. Great video. Well explained.

@thisisyourtransmission 2 жыл бұрын

Welcome

@pj7362 4 жыл бұрын

Thank you for a great video.

@thisisyourtransmission 4 жыл бұрын

welcome

@Mike_The_Hog_A_Nator 2 жыл бұрын

Looks like your shop is like my "Performance Transmission" Shop is. Have an 02' Blazer with a 4L60E Transmission that had a broken Sunshield 18k miles ago. I was told I needed a new rebuild & Torque converter. $2200 later, I had to take it back 4 times because of rear seal leaks & shifter linkage leaks & pan gasket leaks. Now, I was driving my Son 7 miles to work & was at the store when I noticed Trans Fluid pouring out the bottom of the bellhousing! I had Triple A tow it back that Crappy shop & they can't look it for another 4 days. I'm hoping a coolant line popped off but I'm sure the Torque converter or Rront Pump Seal blew! It was running & shifting fine. No prior symptoms besides a slight whinny noise that started since the rebuild & I took it back 2 times they told me it was my AC Clutch kicking on & off. I said, it does it with the AC Off! The Torque converter they put in was Blue. All of their Techs are ASE Certified but I don't know where they went to school. That tranny should last 150k miles the way I drive. I don't tow, etc. Just drive less than 5k miles a year.

@thisisyourtransmission 2 жыл бұрын

LOL, did you get it fixed?

@paulsmith8303 3 жыл бұрын

I have been battling transmission leaking problems for over a year and low and behold your test trick showed that my torque converter was the problem after a trans shop said they rebuilt it. Bull shit, all they did is give it a new paint job and mark it as done. I had to remove and install my trans 6 times overall and because I finally did the work myself I finally have a drip free Hot Rod Corvette for the first time in three years. NEVER GIVE UP. YOU CAN DO IT !!!!!!!

@thisisyourtransmission 3 жыл бұрын

Ha ha , glad you got it

@garyr7027 3 жыл бұрын

Why I don't take my vehicles to a shop unless it's exhaust work, front end alignment and new tires. I'll buy rebuilt tranny's from a parts store before I let some rip off shop rebuild one. Most can't or won't do it anyways, and some who do won't do it right... just out to make a quick buck.

@ebperformance8436 3 жыл бұрын

I know on some transmissions ...they don’t have that setup, the have the pump seal o ring on the input shaft....I replaced the main seal, but it still leaked.....pulled the transmission and seen the o ring trashed” I immediately stop driving it when I start hearing noises” lucky for me there was no damage and I ended up replacing the entire torc converter.....due to converterting the supercharger to turbo. Still trying to find a input shaft o ring.....I don’t trust going to Home Depot for one Do you have a small o ring on the input shaft? If so check the o ring” on a 4t65e” it has a main seal and a small o ring on the input shaft....yours might have 3 seals.

@chrismunos7741 3 жыл бұрын

Tearing into my front transmission leak later today. Thanx for the heads up on what to look for. All I know is something major let loose. small leak to massive leak with one engine rev. Almost has to be a seal that popped out but there's only one way to know for sure.

@thisisyourtransmission 3 жыл бұрын

Good luck!

@hallhouse5098 4 жыл бұрын

Brake kleenex. compressed air to clean area then hit it with some leak trace powder...that powder really helps pinpoint the leak instantly . Would work great in conjunction with your Macgiver air pressure tool. Pretty ingenious tool you made there.

@thisisyourtransmission 4 жыл бұрын

will try the leak trace powder someday

@orlanmedina3693 Жыл бұрын

Thanks for the tip

@ebperformance8436 3 жыл бұрын

I just found out for the 4065E there is a seal that’s on the shaft that goes to the torque converter mine is toast and I’m trying to look for a replacement I have no doubt that that’s what’s causing the leak

@derekkchung Жыл бұрын

Thanks for the video. Question I have. I separated an engine from tranny (GA6F21WA which is a Aisin TF60-SN I believe) on a 2010 mini cooper, now tranny tc seal is leaking, even with a new seal (twice). Could it be due to a worn bushing, neck of tc is no longer concentric to the bushing and seal, after reinstallation, making the seal leak especially at high engine rpm? If so, I need to replace the bushing. Any easy way without taking the whole tranny apart?

@stealhty1 2 жыл бұрын

Good Catch , thx for share

@sterlingdavidgrasssr 4 жыл бұрын

Man, thanks have a 350 Ford Duly Ford ,front something is leaking.. Going to check that to ,, Thanks, Rang the bell See Ya Texas

@thisisyourtransmission 4 жыл бұрын

you are welcome

@ronaldbjorkland5011 3 жыл бұрын

Great idea

@aros007z 7 ай бұрын

Awesomeness

@skywalkk0079 2 жыл бұрын

So what does it leak water or oil from the toque converter

@thomasconway5284 5 ай бұрын

I've got a problem with a 24 valve Cummins I pulled the transmission and changed the front pump seal,reinstall tyranny exact same thing. I checked for Crack in pump on trans and didn't notice and going to mote Tham likely pull trans back out,thank you very valuable information

@thisisyourtransmission 5 ай бұрын

Welcome

@JonnyCoolMelt Жыл бұрын

Very informative 👍

@thisisyourtransmission Жыл бұрын

thank you

@sa-oz8gu 4 жыл бұрын

Also the old seal sometimes wears a groove into the snout and it still leaks.

@thisisyourtransmission 4 жыл бұрын

I believe that you are referring to the torque convertor. Yes, it can get worn.

@SARISARICHANNEL708 2 жыл бұрын

Good job

@thisisyourtransmission 2 жыл бұрын

Thank you

@ryandungy151 3 жыл бұрын

Very helpful

@thisisyourtransmission 3 жыл бұрын

welcome

@DaS-ys8us 4 жыл бұрын

Nice diagnosis! Only problem is now I'm seasick and threw up on my keyboard.

@thisisyourtransmission 4 жыл бұрын

ha ha ha

@andrewt.c.wilson808 3 жыл бұрын

great catch

@thisisyourtransmission 3 жыл бұрын

Thank you

@markwilliamson5207 3 жыл бұрын

Trouble shooting from the beginning instead of replacing parts would have been a first time fix?

@garyr7027 3 жыл бұрын

Use a socket on a 1/4" drive ratchet to tighten those clamps, a screwdriver doesn't tighten them up good enough for high pressure.

@thisisyourtransmission 3 жыл бұрын

I am going to try to make a better version of this tool

@christopherleubner6633 4 жыл бұрын

The weld on that is badly cracked, replace the part unless really good at mig welding.

@thisisyourtransmission 4 жыл бұрын

You are right

@robd117 Жыл бұрын

Have you ever had to use sealant at the pump o-ring? I have gone through 2 o-rings and the fluid still seeps through.

@thisisyourtransmission Жыл бұрын

I have not had to use sealant on a 4L60e prong, yet. Some other transmissions I have, just to make sure I did not have a leak in that area.

@RicardoHernandez-ei6wc 2 жыл бұрын

Smart

@heyitschinoable 3 жыл бұрын

Add some UV light and pressure test it see exactly where it is coming from

@bobrusso1814 4 жыл бұрын

Nice catch.

@thisisyourtransmission 4 жыл бұрын

Thank you very much!

@cnrails 4 жыл бұрын

I would’ve probably tested that the first time I did the warranty work for the leak just because it had to be pulled anyways concerning the front seal. It only takes seconds to do and saves a lot of unnecessary labor removing it again.

@thisisyourtransmission 4 жыл бұрын

Understandable, however, when a part is supposed to be rebuilt by professionals in factories, (and tested as they say) it is easy to not blame them, for many assume at times ( me included) that they do not make mistakes.

@cnrails 4 жыл бұрын

THIS IS YOUR TRANSMISSION everybody wants the cheapest part instead of reliable parts. We get what we pay for.

@heavychevy2289 4 жыл бұрын

I have a th350 I developed a leak in the front seal I replaced the bushing and seal... I noticed some scoring on the shaft of the converter will this cause a leak to happen... It's still leaking with new seal and bushing.

@thisisyourtransmission 4 жыл бұрын

A bad converter neck will cause a leak. A Leaking converter will cause a leak. Pump bolts orings will cause leaks. Pump oring seal will cause leak.

@mike559k 2 жыл бұрын

Old man here..just learn something..thank you!!!

@D4x4Bronc 4 жыл бұрын

My 4r70w keeps pouring out atf from bell housing on a 100k rebuild if it's not the t/c what would cause that. Seal was replaced with OEM 5 k miles ago

@thisisyourtransmission 4 жыл бұрын

1) torque converter 2) front pump seal 3) front pump bushing 4) front pump cracked 5) front pump oring 6) front pump bolts loose or leaking

@D4x4Bronc 4 жыл бұрын

@@thisisyourtransmission thank you!! i will tear it apart next week and see which it is!!

@D4x4Bronc 4 жыл бұрын

@@thisisyourtransmission pulled transmission out and seal is stuck onto the TC. Was rtv'ed onto pump also.

@partsshooter 4 жыл бұрын

In this situation do you replace or just reweld the converter?

@thisisyourtransmission 4 жыл бұрын

Replace

@garyr7027 3 жыл бұрын

You can't reweld them and keep them balanced. You do NOT wanna run a unbalanced torque converter.

@jonathondeeds3423 Жыл бұрын

You don't need to fill it with ATF you can just use a leak down tester with a pressure gauge.

@Phill135 4 жыл бұрын

I have a 2011 ford crown victoria, i got the transmission rebuilt and after I installed it it would not go into gear, i sent the whole car back to the shop and they said the front transmission pump keeps breaking and they cannot find out what it causing it, they said they've used 2 different transmissions and torque converters, have any idea on what could be causing the transmission pump to keep failing??

@thisisyourtransmission 4 жыл бұрын

Bad flywheel, bad crank, I've also heard that a bad ground can destroy a pump. May need to put a ground to the transmission case.

@Phill135 4 жыл бұрын

Yeah they said its a crank, worth fixing or no?

@thisisyourtransmission 4 жыл бұрын

@@Phill135 that is up to you. Is the body in good shape?

@Phill135 3 жыл бұрын

This is my baby ive only done 1 burnout with her😂, but my 2004 on the other hand👀

@jonmoore9988 4 жыл бұрын

My 1986 700r4 is leaking out the front also and we replaced the front pump seal and it's still leaking just as bad, pouring out. What could it be?

@jonmoore9988 4 жыл бұрын

My torque converter isn't rebuild though, but could it be leaking anyway

@thisisyourtransmission 4 жыл бұрын

1) cracked pump 2) Worn front pump bushing 3) front pump oring 4) front pump bolts 5) bad torque converter

@jonmoore9988 4 жыл бұрын

@@thisisyourtransmission the bolts are tight and I don't see a visual crack in the pump, thanks for the help. Maybe now I can get what I need to fix it

@jonmoore9988 4 жыл бұрын

@@thisisyourtransmission could you email me, I've a few questions and would like to send you a pic. moorejon12@gmail.com

@glenn6707 4 жыл бұрын

i have the same issue. did you find outwhat was wrong?

@louismatthew9301 Жыл бұрын

Mine is leaking too but it is a new transmission and torque converter,n i have changed the front seal twice

@thisisyourtransmission Жыл бұрын

What will leak: a front seal, a cracked pump, a bad torque converter, a from pump bushing, loose/unsealed pump bolts, cracked case, front pump oring

@LoyalDogProductions 4 жыл бұрын

rub a little butter on it

@carlosbanegas7577 Жыл бұрын

thank very moch god video

@thisisyourtransmission Жыл бұрын

You're welcome

@butterfliesarecoolfightcps645 4 жыл бұрын

How much is a new seal?

@thisisyourtransmission 4 жыл бұрын

The seal itself about $10

@leemp337 Жыл бұрын

spray some soapy water on that weld to see it bubble.

@Tryalittlebit 2 жыл бұрын

Why didn’t he just replace all the seals and everything the first time he had it out?

@teebamos7350 3 жыл бұрын

Awesome troubleshooting

@joycepeterson6971 2 жыл бұрын

The tran. oil getting to hot can cause this . The seal will expand from heat. ford is good for this. change radiator. trans. cooler too.

@debrajohnson4871 4 жыл бұрын

Wow that sucks

@jwlivingston1 3 жыл бұрын

I just pulled and replaced the seals only to find a hairline crack along the edge of the torque converter.

@rotsbelramos7685 Жыл бұрын

Put glue I promise u won't regret it 😂😅

@0x00zero 3 жыл бұрын

Warn the viewers please to be very careful with air in PVC. Never recommended, if so, keep under 10 psi. Also, use air pressure regulator.

@voivod6969 4 жыл бұрын

INGENIUS! I have a trans coming out of a Volvo 740 for the second time and this will be what I look at next. P.S.- it just occurred to me I have a device for pressurizing cooling systems to check for leaks- it has a inflatable rubber bulb that is meant to create a seal at the radiator cap opening, and will likely do the same job but without wanting to slip.

@thisisyourtransmission 4 жыл бұрын

Also look at front pump bushing to see if it is tight. If it is an aluminium pump check for cracks. If I have to take a transmission out for more than one tine for a front leak, and can't find anything, I change front pump and torque converter!

@paulutionz 2 жыл бұрын

Why couldn't you just overfill the torque converter with fluid and see where the fluid comes out at?

@thisisyourtransmission 2 жыл бұрын

I prefer some pressure, just like testing for a leak in a coolant system.

@TheLaubachs 4 жыл бұрын

My son came home with a bad leak from the front of his transmission coming from the "plug" in the bell housing of his 1996 Ford Mustang GT 4.6L. I will be pulling the transmission in the morning. If it is not something immediately obvious, what should I look to replace to make sure the job get's done correctly: front pump seal, torque converter, and should I do a pump overhaul? (www.amazon.com/gp/product/B01GZB5XEU/ref=ox_sc_saved_title_1?smid=AXBNFR3SO17U3&psc=1) or is the pump bushing and gaskets unlikely?

@thisisyourtransmission 4 жыл бұрын

In rare cases, the pump can have a crack in it. This is very rare. You can choose to change the pump if you desire. It will be hard to find the crack. However, here in the shop if there is a leak in the front, I am not going into it again. I will change the torque converter, the from pump bushing, the front pump seal, the front pump oring, front pump gasket (because the gasket may get damaged on take out) and I will clean the bolts with brake cleaner and the surface area. Then with the bolts, I will put silicon around the bolt flanges then tighten them. Make sure you get good silicon, not all are equal.

@TheLaubachs 4 жыл бұрын

@@thisisyourtransmission My son had no leaks coming from his transmission in his 1996 Mustang GT. 2 weekends ago, 1/4 mile from home, he left a trail of transmission fluid all down the street and up into the driveway. He came in panicked and I pinpointed the heavy leak coming from the bell-housing plug. We pull the transmission, drained the fluid (it was very clean and so was the magnet in the drain pan). I pulled off the torque converter and the seal was not there. I look at the torque converter and there it was. In preparation for the repair I bought a front pump rebuild kit and a rebuilt torque converter to make sure everything was totally fixed, before reinstalling. Given this scenario: my gut feeling is that this was just a blown seal that leaked a lot the last 1/4 mile that the car was driven home. It is hard for me to believe that this is anything more than the seal that was completely out of the pump. Advice needed: should I do anything more than just replacing the seal and reinstalling? I have never opened up a tranny before, but have done a lot of research during the last two weeks. Should I rebuild the front pump (I have all the parts to do it) or just put on a new seal and reinstall? New Torque converter (or I could just take back the unopened box and save some money)?

@thisisyourtransmission 4 жыл бұрын

@@TheLaubachs you need to take the pump out and replace the front pump bushing also. If the front pump bushing is worn, the seal will blow out too. The bushing holds back about 90 percent of the fluid. The seal holds the other 10 percent. If you are going to take it out replace the bushing.

@TheLaubachs 4 жыл бұрын

@@thisisyourtransmission OK, thanks for the info. Given the above scenario of no leaking prior to the big leak (blown seal), do you figure the pump rebuild will do it.

@thisisyourtransmission 4 жыл бұрын

@@TheLaubachs did you take this transmission out before the seal blew out?