Damn i sure hope i can ride well in to my 70's like these two gents..👍🏾

Just ordered my 2022. I can’t wait

I love the Maico sticker on the wall.....big bore 2 stroke monster of 1980

Had my 2022 xt for a year now. Brilliant bike, ride lots of green laning in the UK. Simple job to change front sprocket. I use 15t for laning where there is some road work and have covered up to 90 miles before reserve, power valve fully out. Also ridden it in 7 trials competitions but only on the easiest route as the turning radius is not tight enough for middle route sections and that's with steering stops removed and forks raised in clamps and bars rolled forward a bit. Use either an 11 or 12t front and wind the power valve in 1 to 1.5 turns to slow things down a little. Maxxis trialsmax tyres with 10psi front and 8 rear. No reliability issues in 900 miles.

I really appreciate your insight and honest views. I’ve just picked up my 22’ XT which still has 0 miles. That will change very soon, thanks again. 👍🏻

Beautiful bike

Nice video! Thanks 👍 Loving my 2020 XTrainer. Ride on. Stay safe ✌ Subscribed 😎

Hi so 300rr exhaust pipe fits on the xtrainer or no. Did you have to jet the carb.

Curious if you had to rejet the carb as mentioned below? I have a 18' XT and been on the fence about putting a pipe on it. Would like a little bit more top end. Great video!

What is the target weight is the XT setup for ? I’m 180 , would it be on the softer side for me ?

Great video 👍🇦🇺

Watch the thermostat, it will rub through the radiator and cause a leak. The breather on the fuel cap comes off easily and sprays fuel on you as the nipple has no bead, I lock wired mine. I also lock wired the stand bolt as even with loctite it came loose. Added an in-line filter as I kept getting overflows from crap in the needle and seat.

If it’s good enough for him it’s good enough for me.

More video of Geoff riding the xtrainer would be great.

So after all these mods I don't have to jet the carb.

can you put turn signals on this 300?

Is it a good semi beginner bike

I had an xt and my opinion of the shock and fork is that they are garbage. The motor is good, it has a different kind of weird handling characteristic. In tight stuff the front end hunts and that's more prominent at speeds. Also, it pushes during on the throttle exiting corners. That said, it works fairly well at slow tech speeds. My buddy has one with wp open cart forks valved for single track. And a Lanier shock, extended 3mm. His bike rides more like a regular bike....its pretty good.

What pipe is that. Who makes that pipe?

Does anyone know if the ballards pipe for the 300 rr will fit the 2022 300 xtrainer?

Is the RR pipe a direct bolt on? 300RR?

turn the background music and maybe someone could understand what you're saying lol

You put RR pipe and you didn't remove the restriction plate in the airbox ? Come on man, there are a lot of hidden horses there. It is a free mod.

why not just buy the rr if your changing it up with rr parts and changing the characteristics of the design of machine... just buy rr