Transparent Edgelit Display

Рет қаралды 27,596

14 күн бұрын

PCBWay: www.pcbway.com/setinvite.aspx...
Source Files: github.com/upiir/transparent_...
Do you like this video? You can buy me a coffee ☕: www.buymeacoffee.com/upir
-----------------------------------------------------
Links from the video:
- Do you like this video? You can buy me a coffee ☕: www.buymeacoffee.com/upir
- ESP32-S3-Matrix: s.click.aliexpress.com/e/_DE7...
- ESP32-S3-Matrix documentation: www.waveshare.com/wiki/ESP32-...
- BambuLab A1 Mini Combo 3D Printer: shareasale.com/r.cfm?b=242041...
- Acrylic sheets 5x7cm: s.click.aliexpress.com/e/_DkU...
- Transparent Segment Display video from Narkidae: • Transparent 7 Segment ...
- Acrylic business cards: s.click.aliexpress.com/e/_DBv...
- Edgelit displays on Fran Blanche channel: • Super Rare KGM Edgelit...
- Edgelit clocks on AliExpress: s.click.aliexpress.com/e/_DeV...
- Edgelit Clocks on AliExpress yellow: s.click.aliexpress.com/e/_DCG...
- Shifter Knob Project: • Arduino Gear Indicator
- NeoPixels documentation: learn.adafruit.com/adafruit-n...
- Engraving pen: s.click.aliexpress.com/e/_DkC...
Related videos with segmented displays / NeoPixels:
- Arduino Robot Eyes with LED Matrix Display - • Arduino Robot Eyes wit...
- Arduino Wood Clock - • Arduino Wood Clock
- Why are pixels square? - • Why are pixels square?
- Arduino + Matrix Display (The Proper Way) - • Arduino + Matrix Displ...
- Simple big 7-segment display: • Is this the SIMPLEST d...
- Turning Posy´s displays into real ones: • Posy’s designs ➔ REAL ...
- Arduino OLED Segmented Clock - • Arduino OLED Segmented...
- Fake nixie clock: • 1 clocks, 194 400 pixels
- Nixie Tube Clock Without Nixie Tubes: • Nixie Tube Clock Witho...
------------------------------------------------------
Learn how to create edgelit displays using pre-cut acrylic sheets, 3D printed stand and 8x8 RGB LED Matrix display with ESP32S3 microcontroller.
------------------------------------------------------
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
------------------------------------------------------
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
------------------------------------------------------
#arduino #diy #edgelit
------------------------------------------------------

Пікірлер: 90

@upir_upir 12 күн бұрын

All the source files are on GitHub: github.com/upiir/transparent_edgelit_segment_display

@espenlauvrak8835 12 күн бұрын

This is great! A couple of suggestions: 1. You can bend the acrylic sheets to get them closer to each other. That would probably increase the viewing angle a little bit. 2. Add reflective paint/foil to the edges to get more light. 3. Add film/dark acrylic to the front to hide panels that are not lit up.

@upir_upir 10 күн бұрын

Thank you for all your suggestions, this is great. I will try to incorporate some of those in my next iteration.

@eds123matt 11 күн бұрын

I’ve watched a lot of youtube maker videos over the years, and very rarely do you find one that goes into as much detail as this but still feel balanced. This video shows the inner workings of each part of the problem solving process but doesn’t go on for too long. Perfectly explained and very educational in my opinion. Cool project! I’ll give it a go. Thank you.

@upir_upir 11 күн бұрын

Thank you for your nice words and you support, it´s highly appreciated! Good luck with your project if you try it, and please feel free to share your creation. Thank you again!

@skmgeek 12 күн бұрын

as a trans parent, i can confirm i am an edge-lit display

@upir_upir 12 күн бұрын

I see. That was a poor choice of hyphenation.

@arshaqueabraarali2946 12 күн бұрын

This simple display is truly stunning. Your explanations are clear and engaging (as always). Fantastic video!

@upir_upir 11 күн бұрын

Thank your for your nice words, I´m glad you like it!

@LincolnWorld 3 күн бұрын

That was amazing. If you need to etch more in the future, you may want to put a "lip" or raised edge on the 3D printed masks. Then the acrylic could sit inside it, locked in place. Less chance of shifting while etching. You could also get a cheap sand blasting tool and use TPU for the mask. That would probably be the fastest way to etch without a laser. I've been wanting to create something with neopixels, but feel like a lot of the "programing" and electronics stuff is not something I really understand. This video is making me want to go for it. Thank you for sharing this with us!

@upir_upir Күн бұрын

Thank you! There is a "lip," but maybe not be very visible. Sandblasting would be cheaper but much messier. I will probably buy the laser in the (near) future anyway. That´s the last thing that´s remaining in my workshop. Good luck with your project!

@that_kai_person 12 күн бұрын

Dude, not only are your videos fire (And an autism trap), but your voice is amazing. I'm really looking forward to more stuff from you (& Posy).

@ezrakornfeld8436 12 күн бұрын

Real

@upir_upir 12 күн бұрын

Thank you for your nice words, but can you please explain what “autism trap” means?

@skmgeek 12 күн бұрын

@@upir_upir they mean that people with autism love getting hyperfixated on stuff like this! once you start watching these videos you can't stop! ❤

@that_kai_person 12 күн бұрын

@@upir_upir , skmgeek replied to that question and that pretty much sums it up.

@that_kai_person 12 күн бұрын

@@upir_upir Also, I am waiting for you to get into RF circuits (If ever).

@Great_XicoZe 12 күн бұрын

Another great video. Keep doing it🎉

@upir_upir 11 күн бұрын

Thank you, I’m glad you like it!

@ImaginationToForm 10 күн бұрын

I had similar idea but hadn't been able to make one yet. I'll have to look up those small Neopixles you mentioned and get a board made. Cool to see that it looks pretty cool. I have a Maker space nearby that I'll be able to use their laser cutter.

@upir_upir 6 күн бұрын

I also plan to get a custom PCB with those tiny neopixels, that should hopefully make the spacing smaller for a better appearance. I´m still undecided about whether to buy a CO2 laser or a small CNC...

@paulroberto2286 10 күн бұрын

wow, I love this! Really easy and simple way to create a cool effect. Great video! :D

@upir_upir 10 күн бұрын

Thank you, I´m glad you like it!

12 күн бұрын

Skvělá práce, perfektní zpracování a vysvětlení, srozumitelnost a hodně slušná angličtina :) Díky!

@upir_upir 11 күн бұрын

Díky! Takže už jen stačí, abych zapracoval na přízvuku a bude to :)

10 күн бұрын

@@upir_upir vůbec to neřeš, mluvíš dobře a srozumitelně. Každý rodilý mluvčí je zvyklý, že cely svět mluví s přízvukem :) Ale mně to taky trvalo se s tím smířit 😅

@bimokayoba 12 күн бұрын

Wow wow wow... it's AMAZING DISPLAY!!!!! thank you verrryyy much ♥, this display must be with editable designe 🤩

@upir_upir 11 күн бұрын

Thank you, I´m glad you like it!

@2150dalek 12 күн бұрын

coOL...Upir did it again....one day I would like to simulate a neon tube in such a similar solid state manner.

@upir_upir 11 күн бұрын

Thank you, and good luck with your project!

@JackieBright 9 күн бұрын

I think you could improve the display angle by reducing the distance between the panes. You might even get away with using the same LED matrix by having multiple panes on top of the same row of LEDs and cutting notches or painting sections of the bottom so only a specific set of LEDs light up each pane

@upir_upir 6 күн бұрын

Thank you for your suggestions; yes, getting the panels closer to each other would probably be the best improvement. If I have time, I might create a custom PCB with those very small neopixels.

@blitzar8443 11 күн бұрын

This is hella cool, cyberpunk nixie tubes

@upir_upir 11 күн бұрын

Thank you, I´m glad you like it!

@fujie-web 12 күн бұрын

Good job Guy ;oP Very good idea :oP

@upir_upir 11 күн бұрын

Thank you, I’m glad you like it!

@appuchia 11 күн бұрын

Great video :) Maybe a 3d printed piece on top could help keep the acrylic pieces at the same distance between each other.

@upir_upir 11 күн бұрын

Thank you. Yes, I’m sure that would help. And also making the base slightly taller.

@SDEntertainer. 12 күн бұрын

🔥🔥🔥

@upir_upir 11 күн бұрын

Thank you!

@WheatMillington 12 күн бұрын

Thanks

@upir_upir 12 күн бұрын

Thank you for your support!

@pvc988 7 күн бұрын

I wonder if all segments could be engraved in a single piece of acrylic and lit up by bouncing laser diode light in a specific way. Central segment could be a little bit challenging but outside ones should be doable.

@upir_upir 7 күн бұрын

Probably not. You would need to physically separate those parts, otherwise, it will be hard to only light up one segment. But separating the parts should be possible, just not without proper tools..

@blitzar8443 11 күн бұрын

Idea: what if you used photo electric glass that darkens and had a single backlight

@upir_upir 11 күн бұрын

Thank you for your suggestion, yes, I would like to experiment with those a little bit more, but since they require high voltage, it´s something I need to learn first.

@SamMotioneer 11 күн бұрын

6:38 Keep in mind that when you try to detect the current gear with the IMU on the gearshifter, you will not only measure the tilt of the gearshifter, but also the tilt of the whole car, in addition to any forced generated by driving. To cancel this out, you could mount a second IMU to the car, and calculate the difference, but at that point, your hall effect sensors might me simpler. And a lot more accurate. 😅

@upir_upir 11 күн бұрын

Yep, that’s exactly the plan, but thank you for pointing this out! I will try to explore all the options, including getting the gear indicator from OBDII…

@Kulderzipke123 12 күн бұрын

What no way😮

@upir_upir 11 күн бұрын

You like it?

@RobertLockhartMakesGames 12 күн бұрын

Great shout out to @FranLab !

@upir_upir 11 күн бұрын

I’m sure many of my viewers already know that channel, but it’s worth mentioning, there are tons of cool and unusual displays.

@AFSMG 12 күн бұрын

Bello

@upir_upir 11 күн бұрын

Thanks!

@baiomarlaye3165 12 күн бұрын

This is prolly obviously but why can't you get the acrylics closer together...

@MatthewHendersonn 12 күн бұрын

They need to line up with the LEDs. I guess you could get thicker sheets of acrylic.

@upir_upir 11 күн бұрын

You can get smaller Neo pixels and create your own -smaller- pcb. I might try that.

@baiomarlaye3165 11 күн бұрын

I was thinking to bend it using heat... regardless this seems like a great starting project but I might cop the materials

@ImaginationToForm 10 күн бұрын

I was wondering why you weren't using a 3d printed rig to help draw the segments. Then voila... you did.

@upir_upir 6 күн бұрын

Yep! That saved me a lot of time.

@belezera 10 күн бұрын

Fala Rodrigo blz? Top com sempre te acompanhar! Com relação ao container, fala com o letraJota, ja sabe td oq pode ou nao dar certo nesses projetos

@upir_upir 6 күн бұрын

What? I´m sorry but the translator is not helping much here.

@emrebahtiyar6673 10 күн бұрын

Hello, can the dolphin animation used in Pioneer car audio systems be designed with OLED and Arduino?

@upir_upir 6 күн бұрын

Is there a link to such animation?

@emrebahtiyar6673 6 күн бұрын

Yes is there kzfaq.info/get/bejne/e89nrdR-vNCXcas.htmlsi=JiFLVHugu2cdXEKw

@emrebahtiyar6673 5 күн бұрын

@@upir_upir kzfaq.info/get/bejne/e89nrdR-vNCXcas.htmlsi=StDbu9zFY6sa7UJu

@kobs9636 Күн бұрын

hey, can you make a tutorial about ds3231 rtc, ssd1309 display and arduino using u8g2 library?

@upir_upir 21 сағат бұрын

I have used ds3231 and ssd1309 in two separate tutorials already. Do you have any problems getting them to work together?

@kobs9636 21 сағат бұрын

@@upir_upir for some reasons i cannot make temperature to show, just question mark and i dont know why. but the date and time shows correctly.

@matteoricci9129 12 күн бұрын

Can't you just cut out the acrylic area you don't use on each section and have less problems on not in line reading?

@upir_upir 11 күн бұрын

Maybe, but you need to separate those somehow. Probably easy task with laser cutter or cnc router, but very hard without those specialized tools.

@andymouse 11 күн бұрын

Am I going crazy or can it only display 0 to six ? don't you need 0 to 9 ? anyhow the template for the digits a great idea you could try out all sorts of stuff like fiberglass pencil or wire brush maybe a scouring pad (Brillo Pad ! ) perhaps just sandpaper......cheers.

@upir_upir 11 күн бұрын

It´s a standard 7 segment display design, you can display any digit from 0-9 for sure. I haven´t heard of fiberglass pencil but I will take a look. Thank you for your suggestion!

@andymouse 10 күн бұрын

@@upir_upir :)

@ezrakornfeld8436 12 күн бұрын

Does this mean I can finally make the PDA from subnautica!?

@upir_upir 11 күн бұрын

Not yet :) But you can get close.

@mypaxa003 12 күн бұрын

5x9 not 5x7

@jorsanflo 12 күн бұрын

what the hell are you tlaking about??

@upir_upir 11 күн бұрын

This one is 5x7cm, but you can get many different sizes on AliExpress that should suit your needs.

@vitorbritesvitor903 12 күн бұрын

@upir_upir 11 күн бұрын

Thanks!

@skunkfpv 8 күн бұрын

Did you get my email?

@upir_upir 7 күн бұрын

Yes. I will answer soon. Sorry for the delay.

@gabrielbravo2829 12 күн бұрын

MODERN DAY NIXIE TUBE

@GodmanchesterGoblin 12 күн бұрын

Modern day version of a 1960s edge lit display, as explained in the video. Modern day Nixies are still gas discharge devices.

@upir_upir 11 күн бұрын

I have also seen the name "LIXIE" for those kind of displays.

@neilscotford6032 11 күн бұрын

If you polish the edges of the acrylic sheet with a blowtorch the dispersion of light will be much more uniform, your video is a great tutorial 👍 kzfaq.infozZ4Iog-wBLc?si=OwTP0qoFXD1KW6wD

@upir_upir 10 күн бұрын

Thank you for your suggestion, I will try that in the next iteration!