How I went about reinforcing the trailer frame so far. Check out the playlist here: • Travel Trailer to Flat...
Пікірлер: 29
@tomahawksteak66722 жыл бұрын
I'm currently building a 28 foot sxs trailer from a old camper frame. I'm using 2 inch c channel for crossmembers . They run the full width of the deck. Welding them 2 feet on center on top of the 5 inch c channel frame. I cut all the original outrigger off before I started welding anything.
@gerlandkent6377 Жыл бұрын
I, like you're idea what you're doing because you're helping me of what I need to do my friend gave me a mobile home which is 14x80 and I've got to disassemble the whole house trailer down to the frame then I've got to cut it back from the rear AXLE and cut the front to bring the hitch back I'm going for a 20ft trailer it's got 3 axles I want to build it for hauling my commerical Backhow
@gerlandkent6377 Жыл бұрын
Thank, you for sharing you're video I'm enjoying you're video keep up the great work
@80ajflores2 жыл бұрын
I am actually gathering material to do the exact same thing on my travel trailer but I'm going to use some sort of 3/8 C-channel cut up in 10" to 14" length to add strength to the wall support angles. The shell in dropping do to the manufacturing materials weaking and warping.
@travishanson1663 жыл бұрын
I just brought home an 18' tandem axle frame. I hadn't decided how I was going to reinforce the frame before putting the decking on, but you pointed out some excellent examples. Also a new subscriber.
@torebertand68903 жыл бұрын
Thanks for the sub. I'm glad I could help!
@mrmg42674 жыл бұрын
Good video, very helpful and informative. Thank you very much. Keep up the good work.
@torebertand68903 жыл бұрын
Thanks, will do!
@dumbpete4 жыл бұрын
Very helpful, like the other guy said, wasn't sure how to reinforce the frame of the trailer, luckily I have two trailers and one will but cut up for scrap to use as reinforcement material for the other trailer.
@torebertand68904 жыл бұрын
That's awesome. Anytime you have a scrap pile to save material costs it helps.
@HealthSupercharger Жыл бұрын
With these reinforcements do you think that frame can support 2000 lb cargo or 3500 lb cargo? Assuming that the axel and leaf springs are upgraded also?
@gerlandkent6377 Жыл бұрын
Again think you so much for sharing
@HealthSupercharger3 жыл бұрын
Great job
@gerlandkent6377 Жыл бұрын
Yes keep up you're trailer project I like you're helpful ideas I'm doing the samething
@memine5653 Жыл бұрын
How did you find the strength of c-channel? I have a 5th wheel i am trying to do the same. Maybe even add a dove tail...
@jamesbryant27044 жыл бұрын
Im glad you explained like you did because i have the same trailer that i just stripped down and was wondering if i should reinforce it and i am going to do like you did thanks
@torebertand68904 жыл бұрын
Glad it helped. I will continue to explain things as I go along.
@gerlandkent6377 Жыл бұрын
Those pc of steel that's sticking out from the outside of you're trailer frame I have those to on this house trailer frame those are the pc that holds the outside walls on what was before
@activemanishere Жыл бұрын
Or just replace it with square tubing. This seems like a lot of extra work for this.
@HealthSupercharger Жыл бұрын
I have a angle iron frame trailer. 7ft x 4.5ft trailer and the angle iron i do believe is 2x3 angle iron x 3/16 inch thick. These are my main beams running lengthwise. Then there is sheeting sides about 16 inch high which does add little strength. the cross members are just 2x2 angle iron probably 3/16 inch thick because i was grinding the rusted out metal floor out. It has a 2000 lb axel. Is it possible to upgrade the axel, and reinforce the frame to hold 3500 lb or 5000lb of soil?
@andrewdunlap5130 Жыл бұрын
Did you reinforce your trailer?
@apeelingbanana48943 жыл бұрын
Does reinforcing it make it be able to put more on it ?
@torebertand68903 жыл бұрын
If the axle and springs are upgraded as well then yes. The main reason I do this is because the frame has too much flex in its standard configuration without the structure on it.
@80ajflores2 жыл бұрын
Angle wall support
@hassancharaq5775 Жыл бұрын
Hello my friend, I am your brother in the profession, but I am looking for a job. Thank you
@gunnie7992 жыл бұрын
They are outriggers
@beechcraft12 Жыл бұрын
cool video, however, no need for that jesus crap at the beginning. ^_^ cheers