Great video 👍🏻👍🏻

Love Summit, they are such an under rated RC. I've got surpass hobby 4068 2050kv and Hobbywing max 10 with 17/68 gearing. It's not as smooth as the brushed setup when crawling, but it's still able to crawl nicely. The cogging is there but on low gear it manage to keep it to a minimum. Thanks for great content, much appreciated 👍👊

Great video- I just bought a Summit and the previous owner had already put that same brushless system in it. This is super helpful info, since I'm still fairly new to RC trucks!!

Hello friend, great show the demos, I bought a SUMMIT on 09/17/22, and so far I'm satisfied, it's not new, I bought it used... congratulations for the video... I made a video of it here on youtube... stay tuned feel free to comment ok....greetings from Brazil

2:02, I had issues with one of the servos, and went nuts, but realized, that it was the diff metal control on the remote. I unknowingly kept tapping it with a carabiner looped on my holder around my neck. Them. Boom it stopped, but this may not be your issue. Thanks for the video again. Happy Friday!

Love your videos just got a slash 4x4 vxl

Nice video bro, I would definitely leave this set up for bashing and keep the factory 775 for crawl.

you can leave the crossmembers on the body w/ the proline bodymounts. ihave just installed the same setup last week and although I was hesitate to believe it would work, I had no problem keeping the caps tight. good luck!

You can set a drag brake for that, but the slop in the transmission is mostly due to the dog shifter gear in the transmission, the stock one is plastic, when you have the truck sitting there, with no power or anything, try to slide it forward and back, and that rolling that it allows to happen in both directions before you feel the gears engage is the amount of slop in that stock transmission. I don't know if they are still available, but there was a company LEM that made a hop up for that gear, in aluminum and that removes a lot of that slop (it engages much more quickly and smoothly).

what tires wheels are those ? i have this monster and need 4 tires

Once you got it in low gear it actually did quite well

It looked good. Grab yourself the dog carrier from LEM. Easy job to do and it will help with what your experiencing.

did you mention what KV that motor is?

Idk I definitely wouldn’t call this a crawler or use it for crawling, I mean yes you can crawl with it I’ve seen people trying to crawl with it. The it’s so big & ties are so huge nothings gonna stop it lol. Definitely a cool basher to take out & smash around. I’ll stick to my gspeed LCG’s & trx4’s for crawling!! Cool to see it out and about though.😂😂👍🏼

Ok so for servos let me share something I've learned over the last few months. So you can obviously upgrade to a HV servo with high torque but then most people end up running those off a BEC that's internal on their ESC or they run an external BEC. Both of those are decent solutions and work. But if you want the best performance you need to have an external battery power the servo directly and not a BEC / ESC. It's a pretty dramatic difference and I learned this through the company promodeler who make amazing servos of all types and sizes and sell the external battery you would want to power it with. Then you just plug the signal.wire into your reciever and then basically have a Y connection that then allows you to use an external battery to power the servo. So the servo is now no longer powered via the reciever and only uses that for signals and the servo gets all it's power from a bettery you would mount on your rc somewhere. I did this to my Xmaxx and the results are insanely good. Then all I have to to is charge my servo battery every so often. It has a balancing cable and charges via XT30. I only have to charge the servo battery once every few months after many runs...probably 50 runs.

I think those are fasttrack driveshafts

1/10th is a scale not a size.