TRIMMER HEAD WONT SPIN OR STOPS IN TALL GRASS? THEN YOU MUST WATCH THIS!!

No video

TRIMMER HEAD WONT SPIN OR STOPS IN TALL GRASS? THEN YOU MUST WATCH THIS!!

Рет қаралды 64,157

3 жыл бұрын

TRIMMER HEAD WONT SPIN OR STOPS IN TALL GRASS? THEN YOU MUST WATCH THIS!!#SmallEngineRepair #STIHL #LawnmowerRepair #ForCycle #2Cycle #SmallEngines #Weedeater #Trimmer #HowToFixASmallEngine #Won’tStart #BadGas #Carburetor

Пікірлер: 46

@letsgowoodwork2272 3 жыл бұрын

Great video. In fact, I love your repair vids. What amazes me almost as much as your knowledge is the way some of the equipment looks. They look like they are being used by someone that didn’t have to buy it. Great work though. Keep the videos coming.

@chavolandia7438 Жыл бұрын

Thank you brother I’m Mexican American and proud I like to fix my own stuff !!🇲🇽🇺🇸🤝💯 withnout tools were not worth anything !!!

@mixinem Жыл бұрын

No mames guey... pero ahuevo primo, a chingar al jale. Suerte

@eddymofo3359 2 жыл бұрын

Thanx mate, I didn't need a new clutch. There was a small rock stuck in it 🙃

@brianleung3442 3 жыл бұрын

You speak Very clear and details Thank you very much

@butler386 3 жыл бұрын

Great video. I don't think I have seen one of these replaced before so fantastic information. Thanks for the video.

@MoMo-ow7ez 2 жыл бұрын

Nice explanation

@geraldgilbert8617 2 жыл бұрын

Awesome!!!!! I needed this help! Thanks

@maxmeek8923 3 жыл бұрын

Super helpful. Thank you.

@blackhorse2947 2 жыл бұрын

Good information and demonstration

@12namleht 3 жыл бұрын

I have smashed that Subscribe button

@bradcouden 7 ай бұрын

Brilliant thank you mower medic 1 🤘

@DeliciousBass01 3 жыл бұрын

Great video!!!

@rhballoons Жыл бұрын

Awesome, I’m new at this..great vid.

@victoraldan7022 2 жыл бұрын

Thank u from Mariana islands:|~~~

@customerservice564 2 жыл бұрын

just subbed. my trimmer attachment on my km130 has lost most of it's power. the motor seems to be running fine but as soon as i try to trim some grass, the head seems to slow way down and won't get through even thin grass. you think it might be the clutch? thanks for any advice.

@guadalupecamarena6683 11 ай бұрын

Can just the clutch spring be replaced or do you have to replace the whole clutch assembly

@jorgegarcia4800 3 жыл бұрын

Does anyone know if you can use the clutch of a FS 90r on KM 90r?

@nashguy207 3 жыл бұрын

Yep I have seen them get pretty thin on my FS 94 R's. I have also had an issue when you push the trigger you here a clanking sound the clutch and spring look good but I replace the and the clanking sound goes away. IDK?

@2ndspingarage 3 жыл бұрын

I would of took a write brush to that, I've had the clutches hang up. Mainly on gas scooters with the 49cc engine. But they are pushing more rpms also, burning up clutches!

@petroflorence7962 6 ай бұрын

You get spring looser just spring which work exelent i did this whith motor monki bike race cluch but less tension spring faster exeliration same any way

@abrahamortega4243 2 жыл бұрын

Good video i just replaced a clutch on a FS90 but the head still won't turn on i wonder if the clutch is backwards or i need new drum thanks

@JW...-oj5iw 3 жыл бұрын

Damn bots polluting another good channel.

@petroflorence7962 6 ай бұрын

Sand slitly and inside cluch drum whit 120 paper beter grip allways

@Smalltechguy 2 жыл бұрын

So I found the exact trimmer that I am working on...awesome, but I need help on the housing side, not the engine. Any clutch drum removal and installation videos???? thanks

@garylollman5339 2 жыл бұрын

I noticed that you did clean out the brown material in this clutch housing. Was that a normal thing to do, or only because you were videoing and just wanted to show the replacement. When I worked in the auto and heavy equipment industry we always would clean out that material in the video that looks like brake dust that has collected in pass usage.

@paulblackburn931 Жыл бұрын

Medic 1. Can't get my Husqvarna weed trimmer shatf head to spin once I removed the shaft. Can u help. I'm a subscriber

@tomdecker2185 2 жыл бұрын

Does not the clutch drum need to be replaced? If the clutch wears that much them the drum has to be worn. Hasn't the rule always been " never put a new part on an old part that is just as worn as the part you replace"

@petroflorence7962 6 ай бұрын

Plenty of meat all you need to do is adjust spring tension its look like not ceramic

@jwayne777 Жыл бұрын

Rust atrophies metal generally. Consider rust like a coat of ice, if you will. It covers its skin and prevents movement. However, soaking metals in a rust remover like vinegar or a name brand remover. Removes the rust allowing the springiness of the metal to do its job. Do not fear rust. With the right solvent and time metal can be restored, in many cases without the purchase of new parts.

@eve22jptransshamanfan4 Жыл бұрын

That thing idles quiet :D

@oniondidgeridoo9720 2 жыл бұрын

cheers mate

@user-fe7ug3yo2v 2 ай бұрын

Same problem .....echo edger 225 .....spin just a little bit and stops .....

@jalanis7 7 күн бұрын

Hey pal, did you ever fix it....I'm having the same problem with the same machine????

@user-fe7ug3yo2v 7 күн бұрын

@@jalanis7 no I gave up

@gregfisher216 3 жыл бұрын

What about the drum that clutch runs in ? Does it not wear as well ?

@DaleB809 3 жыл бұрын

What would the cost be for a repair like this

@THEMOWERMEDIC1 3 жыл бұрын

Aftermarket clutch is about eight dollars and about 30 minutes labor so I’d say around $50 or less amzn.to/32tpuMS

@DaleB809 3 жыл бұрын

@@THEMOWERMEDIC1 here in Canada it would cost $110.00 parts and labor. $90 and hour for labor for me as a backyard guy would charge $60.00 so not far off. Looking forward to your saw build Thank you

@pattayperformance 3 жыл бұрын

Geezus Christ! What a difference!

@rbljackson 2 жыл бұрын

im having the opposite problem. head always spins. I tried replacing clutch spring first. When i started it at idle, it worked properly. Then I gave it gas and head engaged...but after that it never disengaes. Even with the engine off, the clutch is not disengaging. I took it back apart and I noticed one of the clutch fingers is shiny, and the other is dull which indicates its never expanding. Any ideas for how to fix this?

@jacksons81 Жыл бұрын

Did you ever figure out a fix for this? I'm having the same problem, plus a wicked vibration. I changed cutting the head and inspected the shaft and clutch spring, all good...

@rbljackson Жыл бұрын

@@jacksons81 yes i did. Look at 4:01 in the video. See the two bushings that the screws go thru? Those bushings rust up and dont swivel within the clutch. I had to pull them out, sand them down a bit to remove the rust and then put them back in. It worked fine after that. I used a punch to get them out, but it is possible they could get damaged trying to remove them. I would try and fix the originals first. But if ya break them trying to get them out, you wil need to get replacements. Hope that helps.

@jacksons81 Жыл бұрын

@@rbljacksonThe whole assembly was very rusty so I'll definitely try that, thanks for your reply!