Will the New Haybine Work? Cutting/Raking/Wrapping Hay Continues

No video

Will the New Haybine Work? Cutting/Raking/Wrapping Hay Continues

Рет қаралды 23,435

Ай бұрын

We're dodging rain showers to get our next field of hay baled and wrapped. Alan uses the 820 John Deere and the new-to-us New Holland 489 Haybine to cut. Will it work? The hay got raked and was ready to be rolled up with the New Holland 853 Round Baler behind the International 1256. Lastly, the hay needs to be wrapped up. Some of the hay was on river bottom ground that has a pond between it and the farm, so the Case 530 is needed to load the round bales up. To do that, we use an Anderson RB 200 Individual Bale Wrapper. The Case 830 spins the bales while plastic gets layered on each bale to seal them and allow them to ferment. Wrapping hay like this is a great way to preserve hay to keep it from molding, heating, and burning.
Check out our merch store-
trinity.commun...
Want to send us some mail or a monetary gift? Send it here!
Alan Klejeski
PO Box 153
Sturgeon Lake, MN 55783
Trinity Dairy was established in 2006, in Minnesota. Alan and Jennifer farm with their 5 children; Jessica, Justin, Jordan, Joshua, and Jason. We milk a mix of 33 Jersey, Holstein, Brown Swiss, Guernsey, and Ayrshire cattle. We also enjoy sharing our family's love of Draft Horses and using them for logging and other farm work. Dairy Farming in Minnesota can be challenging, but it's a lifestyle we really enjoy. Subscribe today to watch our small family dairy farm and family grow while continuing to thank our Lord for the blessings we've been given.

Пікірлер: 86

@b.g56.66 Ай бұрын

Move right along with that haybine. Good to see people who can live without a discbine

@richardhoover7569 Ай бұрын

The man who does my mechanic work who worked at our local NH dealer for 15 years. He told me the 489 has one weakness, if that roller chain in there goes bad it will ruin the wobble box. He has one and replaces that chain regularly to prevent that.

@CMDSR 2 күн бұрын

Kinda nice hearing Alan using familiar terms. Farmers all over refer to their smaller fields as a piece. I got a piece of this here and another piece of that over there.

@ericschmitt2597 Ай бұрын

Proud dad moment watching Justin doing the work

@paulcasefarms9933 Ай бұрын

That Justin is turning out to be some good help! Thanks for the video. I do not always comment but I watch them all.

@timlee2243 Ай бұрын

My grandpa use to run new holland haying equipment he had a new holland haybine and a new Holland round baler

@JamesSmith-ru2pw Ай бұрын

I just love people that gets in the comments section of videos and tells that person they r doin something wrong even though they been doing the thing they r doing for years and learn from years of experience it makes me smh great job keep the videos coming its nice to see u passing on ur experiences to the kids may God bless your family

@johnnypurkey7545 Ай бұрын

Great to have children that will help out great bunch of kids 😁

@KeithFinkFamilyFarm Ай бұрын

Ah! This one warmed my heart. Love seeing all of the neighborhood kids having a ball out in the field where the work of the nation is being accomplished. Justin, you're doing a fantastic job. I'm sure you're a real encouragement to your parents. The hay looks beautiful. I'm taking a refresher course in patience as I wait for a weather window to finish up second crop which is now getting a bit ripe. We are in a pattern of every-other-day rain. About 3"/wk. Oh well, I'm getting many little jobs done around the shop as I wait. God is blessing all of us richly. Keep up the good work! Keith-

@mikei2141 Ай бұрын

Glad you were able to beat the rain and get the hay done. Hopefully some day you can get a new clutch put in the 530, looks like it would be a very useful tractor.

@andrewlemke2669 Ай бұрын

I miss the 530 too. Had a 430 growing up

@DonWelter Ай бұрын

Glad you got that bottom done. Hope you've managed to dodge the disastrous flooding in Mn, Iowa, and SD.

@trinitydairy Ай бұрын

Yes, we have. It's horrible what people have lost from the devastation.

@ileenmcminn2062 Ай бұрын

That belt looks like it is the original because of the paint on it!

@hartungdairyfarm0713 Ай бұрын

Nice haybine 👍. I remember when we upgraded from a 477 to a 492 haybine, it was like a Cadillac compared to the old one. I like those old chain balers, I just wish the bales weren't so long

@trinitydairy Ай бұрын

Yeah I wish it was a 4x5

@kevinwilliams563 Ай бұрын

Looks like a pretty good yield Alan. Amazing what a little rain can do to spark that growth. Justin is learning fast and doing a good job for you.

@MichaelDoering-js2gl Ай бұрын

Hi Alan and family, I had a similar issue with my haybine once, both top and bottom rollers must run in time with each other, when I ran into real thick hay one roller would slow and make a banging noise, turns out one of the keys fell out of the keyway on the bottom roller. It is hard to see and maybe a 50 cent part. My machine was an older version of yours. Take care👍🇨🇦🚜❤️

@br927 Ай бұрын

I said to the wife that you were going to buy that 489, and I was right! I was as happy as you were ! I love the old haybines! I started on a 467, I believe it was a 7ft cut, traded it for a 469, 9ft! Run it with a 620 JD, and a 770 Oliver diesel! Loved both tractors! I'v run into a lot of things cutting hay, even naked people, finally they had nowhere to hide and they were about 8 streakers going across the hay field!🤣! Wait until you get a skunk caught in the rollers and have to pry it out!🤣! Justin, you the man! I was helping my Dad running equipment at your age!

@nailbender7223 Ай бұрын

I had a 469 and never seen another one. Bought it about 15 miles away, used it for 15 years and only changed the sickle. Granted only cut 40 acres a year.

@strong40 Ай бұрын

I grew up with a 489. I remember replacing the wobble box more than once. The pan that the guards bolt on to was also bent since the machine was new and would bind the sickle bar. It was a struggle many years. A discbine is a big improvement but you'll likely need a bigger tractor than that John Deere

@farawayfarm2520 Ай бұрын

I know all about that belt. After 4 years of dry summers. 18-21. I had a terrible time cutting the first field in 22. Finally occurred to me that the belt was loose. My adjustment is getting short. I should probably get a spare belt.

@davidbarnes706 Ай бұрын

The haybine looked like it worked good

@davevonmuenster6649 Ай бұрын

Thank you Jordan for your commentary. Loved this video.

@ClassicCarRevivals Ай бұрын

I have 3 of them haybines they work great!

@fullers1966 Ай бұрын

Happy Fourth of July even to all your viewers God bless take care and stay safe

@nailedt0thecr0ss Ай бұрын

I really like your videos brother. I just wanted to say that. God bless.

@rubenmanitowabi5671 Ай бұрын

Another good video nice action shots lol good to see them young ones out to visit the farm and Justin running the tractor an such

@gunnarbeck225 Ай бұрын

Those haybines are tanks they run forever I know I am 50 years old and my dad and his lifetime only went through two

@dlzastera Ай бұрын

Good buy on the new used haybine Alan.

@rc3226 Ай бұрын

Nice video. We have a 492 haybine which is similar. We always ran our head raised up with the hydraulic cylinder for our cut height instead of dragging the shoes on the ground all the time.

@ianrobertson4616 Ай бұрын

our old new Holland the shoes were wore off it, just ran on the cylinder for cut height.

@ADSC2006 Ай бұрын

Good Stuff.

@lesterhertel2945 Ай бұрын

Another very interesting video Thank you 😊😊😊😊😊

@richardgash2349 Ай бұрын

Great video thank you for sharing

@theburnhams2925 Ай бұрын

Another good video, Alan! Noticed you kept a bale on your 3-point for a counterbalance when loading bales on the wagon. Always enjoy your videos (although, at one point there I was seein' a lot more "green" than "red." But that is a sweet little (and no doubt economical) Johnny. Why use "more tractor" than the job requires? Also: Farm Kidz! Ain't they GREAT? If all that energy can be properly "channeled" and encouraged, our Nation has reason to hope. God bless America (as, no doubt He has in the past)! btw, still no Thank$ option.....

@mennoreuten1563 Ай бұрын

Everybody loves good hay, enjoyed watching the video greetings from a Dutch dairyfarmer

@timkessler4894 Ай бұрын

In my day everything was square bales the good old days of sheared pins and untied bales. I never saw round bales til your channel we never would have a place to put them. Great video. Tim ❤

@goatfarmmb Ай бұрын

Always nice to have enough feed for the cattle or any other livestock that we as farmers keep. Sure sometimes the feed can get a little mature then we like for the dairy cattle but at least second crop will be a little younger. I can remember one year we had the weather was rainy and first crop was a little maturer then we liked but strange thing was the cattle milked very well with that feed. Awesome video always cool to see older equipment still being used. Sometimes I wish companies still made equipment like that.

@anthonyhengst2908 Ай бұрын

Those 489 haybines extremely popular machine. We use a John Deere 1209 and we are the oddity. Good to know about the belt, Our John Deere also has a belt that runs the reel, it seems like ours is easier to get at. Good see your 530 in action, our 630 was cheering it on!! Justin (??) is getting to be good with the camera too.

@trinitydairy Ай бұрын

Jordan is our go pro expert.

@MorganOtt-ne1qj Ай бұрын

1209's were great machines in their day! But when they plugged (point rows), they plugged real good. Or really BAD, if you had to unplug it.

@anthonyhengst2908 Ай бұрын

@@MorganOtt-ne1qj we were fortunate not to plug it too bad thus far but we do carry a big pipe wrench to turn it all backwards just in case.

@MorganOtt-ne1qj Ай бұрын

@@anthonyhengst2908 YEP! 👍

@fazeogrez7521 Ай бұрын

⁠⁠@@anthonyhengst2908haha we have a couple 1219s and a 1209 for our smaller fields and us too we carry wrenches so we can reverse it if it plugs up bad

@countryboy3201 Ай бұрын

Great video

@leahmollytheblindcatnordee3586 Ай бұрын

Great video, wish I could smell the hay. Looks like the kids are having fun. The fawn story made me remember. We were in a doctors parking lot last year almost in the middle of where Lansing and East Lansing meet and two young deer (still had their spots) came out of the trees at the edge of the parking lot and started drinking water out of a puddle close to the edge of the pavement. Almost couldn't believe it. Got pictures too. Hope you didn't find the fawn. Thanks for showing them hauling the hay. Justin just keeps getting more experience all of the time and learning well how to measure with his eyes.

@MorganOtt-ne1qj Ай бұрын

Try a piece of window screen in front of your radiator. You can just blow the stuff off, and it doesn't get stuck in the radiator. You just have to do it more often, but you stay on top of maintenance. Great video!

@cambam8110 Ай бұрын

I love your videos. I learn a lot. Thank you for your time.

@johnnypurkey7545 Ай бұрын

Jordan is a great narrator.

@jamesmorrison1884 Ай бұрын

Enjoyed your video think your right keeping the belts tight. Just my opinion belts stretch need be replaced but keeping the right tension makes a world of difference. Have a great day sir.

@ralphriddle8864 Ай бұрын

Very nice job and God bless y'all

@ronniewayne5748 Ай бұрын

Great video as always

@Andy-ix2ox Ай бұрын

How many wraps you put on a bale? Tried to count but got a bit lost. That little jd is an amazing little tool, she has to be the hardest working one left in the world, she’s well able for that haybine even with the good conditioner rollers and they take a bit of driving. Regards from Ireland you guys are getting way better weather than we are our stuff has stopped growing it’s that cold and harsh.

@trinitydairy Ай бұрын

For this hay, I was doing 23 revolutions with the wrapper.

@timlee2243 Ай бұрын

Nice video I’ve been watching ur videos for a couple years now I look forward tor ur videos what was ur 4th of July like

@trinitydairy Ай бұрын

We had a video covering the 4th of July.

@deancampfield4703 Ай бұрын

June grass

@Thewilsonfarm Ай бұрын

Great video it's great see the family working together. Reminds me of when I was a kid now i do it all alone. What percent moisture would you guess that hay at.

@trinitydairy Ай бұрын

I would guess around 40

@popswrench2 Ай бұрын

KEEP CLOSE EYE on rollers ; the slotted drive bolts loosen and run out of time !!! common problem from the start

@trinitydairy Ай бұрын

Yeah, we've had that problem with our old machine

@Timkrenz-gr6ol Ай бұрын

❤❤😊😊 WHEN IS THE FAIR THAT THE KIDS ARE IN 4-H ??? AND WHERE ??❤❤😊😊

@trinitydairy Ай бұрын

Carlton County is the 3rd week in August

@markpigman209 Ай бұрын

You should haul a lot more rock in that swamp road to build it up

@larryanglea3458 24 күн бұрын

I had nh haybine and nh hay baler just like yours they were great ,thick hay good luck how the milk price ?

@trinitydairy 24 күн бұрын

The milk price is okay, about 20 dollars a hundred.

@deancampfield4703 Ай бұрын

We had a 489 darn good machine outlived a couple owners just sayin 😢

@johnhenderson299 Ай бұрын

Old Case tractor to the rescue

@tractorboy373 Ай бұрын

What is your favorite tractor you have

@trinitydairy Ай бұрын

Probably the 1256

@Stephenklausmeyer-hr9rb Ай бұрын

You are just making a slew of videos recently. Hope it pays off.

@ronaldfeuerstein435 Ай бұрын

Tks for sharing. Hay looked good. Really good. Was that about a regular count for bales? Who was driving the 1066? Out. I worked on my cousin farm he had a 530 D. That was the power house for the farm.

@trinitydairy Ай бұрын

That was the first good crop of hay I've gotten down there. My brother, Paul, was in the 1066.

@ronaldfeuerstein435 Ай бұрын

@trinitydairy it looked really thick. Hope you get lots more. Hope corn going good? The corn here in Michigan is well over knee high by the 4th. Im 6'4 and some of looks over shoulder high already.

@rossnolan2883 Ай бұрын

😊😊😊😊😊😊

@nathanheisey4206 Ай бұрын

Good afternoon...trying to be first comment!

@tm679 Ай бұрын

I thought the kids or someone got a little ford tractor a few years ago? How come you don't use that

@trinitydairy Ай бұрын

Something came apart with the clutch, so it won't move on its own. Just waiting for a stretch of dry weather to get it split and fixed.

@pocketchange1951 Ай бұрын

👍👌❤️🇨🇦

@350mack Ай бұрын

If you got the fawn the birds would be all over it or the mother would be right there. 😢 hopefully you didn't 😊

@MorganOtt-ne1qj Ай бұрын

I have witnessed a Bald Eagle laying claim to a fawn that I had mowed over, and the buzzards were just standing around, agreeing that it was probably a good meal, but even 15 didn't challenge the Eagle. Sad part of spring farm jobs, but it is part of life.