xTOOL F1 SLIDE EXTENSION - How to laser engrave glass!

Рет қаралды 17,534

Жыл бұрын

#xtool #pcbway #laserengraver
PCBWay: www.pcbway.com/
Discount code TG10 : 10% off - To Purchase - www.xtool.com/?ref=if7I0mUlth...
Discount code TG10 : 10% off for D1 Pro, F1, M1 and their bundles
www.xtool.com/products/xtool-...
xTOOL F1 SLIDE EXTENSION
4X working area than xTool F1 itself
Still fast & precise and work with 500+ materials
Manual/Auto Focus and Frame/Outline Preview
Come with 5 clamps for holding materials in place
During Father's Day Sale, bonus savings do not apply to F1 accessories.
xTool F1: Fastest Portable Laser Engraver with IR + Diode Laser
‪@xToollaser‬ #xtool #XtoolF1 #f1
Type Details
Laser type 10W diode laser +
2W 1064nm infrared laser
Product size 179mm*235mm*334mm
Product weight 4.6kg
Accuracy Movement accuracy：0.00199mm
Repeat positioning accuracy：0.000248mm
Working area 115*115mm rounded rectangle
Expandable to 400*115mm with accessories
Preview Rect & Outline
Preview speed Rect：12000mm/s
Outline：8000mm/s
Up to working speed 4000mm/s
Applications XCS / Lightburn
Connection WiFi & USB
Support file SVG / DXF / JPG / JPEG / PNG / BMP,etc.
Support systems Android / iOS / iPad / Windows / macOS
Input 24V 5A
Key Chain -
www.etsy.com/listing/10461490...
Bear Coasters -
www.etsy.com/listing/77033246...
Glass Coasters -
amzn.to/444azX9
Tempera Paint -
amzn.to/42Nt9C2
Mando -
www.etsy.com/listing/13478292...
#Lightburn Software
lightburnsoftware.com/
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #ATOMSTACK #ortur #xtool #laserbox #thangs #40watt 40 Watt laser #thangs.com

Пікірлер: 47

@dupescraftingdesign7872 3 ай бұрын

Thank you for the videos. so helpful

@bruceyoung1343 Жыл бұрын

AWSOME DUDE. DEFINITELY FOR LARGE WORK

@gaberomero2551 9 ай бұрын

Great episode, you really have a talent for teaching keep up the good work!

@nathanwolf5547 8 ай бұрын

Thanks so much for the video. I’ve just bought the package. I am learning so much from guys like yourself. Cheers from the UK

@TripodsGarage 8 ай бұрын

That is awesome! Hope you enjoy it! Thanks for watching and commenting 👍

@Firstleaker Жыл бұрын

Get a leg up 😂. Great video! Love those hold downs

@maxinealvarado6645 Ай бұрын

Great video! Thank you.❤

@TripodsGarage Ай бұрын

Glad you enjoyed it!

@buildersmark Жыл бұрын

This is very cool for Fiber style lasers!

@TripodsGarage Жыл бұрын

It is a really cool little laser! Thanks for watching and commenting 👍

@TechnicalTrendy 8 ай бұрын

nice machine and great video!

@Amberdogproductions 6 ай бұрын

This is a great video. Gave me a feeling of confidence here. I've got a 3d printer so MAYBE I can figure out how to make a jig of some sort.

@zero00044 Жыл бұрын

Waiting for mine to ship. I'm going to be using my other laser to cut some jigs for each specific item that I plan on using this for, so I never have to worry about placement. Since the bottom plate comes off for pass through engraving, it's perfect for individual jig cards. Just place one in for whatever product I'm doing. Plan on making some for the slider extension too. Just need everything to arrive first so I can do measurements and tests. Ordered it may 22nd and the first payment is already due, but it hasn't even been shipped yet lol. Hopefully I will receive it before the end of July.

@TripodsGarage Жыл бұрын

That is awesome! It is a great little laser!

@cmtravis13 Жыл бұрын

Great video, now all we need is those clamps on the honeycomb bed.

@TripodsGarage Жыл бұрын

Absolutely one of the best designs I have ever seen for bed clamps!

@Shadowman-in9zj Жыл бұрын

Could you make a vid show casing the x tool app for mobile use , I don’t have a computer , please

@bestyoutubernonegraternumber1 Жыл бұрын

They need to make a turntable, too. For pens etc. A radial table like on fiber lasers.

@ericmelvin10 Ай бұрын

Can you share the settings? Thank you

@qpadua1948 10 ай бұрын

Will it engrave on clear acrylic?

@devinweaver9749 9 ай бұрын

Do you know what the usb cable type is for this? Is it xtool's customs usb?

@armandoperri9487 8 ай бұрын

Please, somebody can explain me if on the f1 is possible to use the slide extension and rotary system at the same time?????? Thankss

@dupescraftingdesign7872 3 ай бұрын

why do you have to use the paint when etching the glass?

@fratre9683 5 ай бұрын

Hello, nice video! I have questions about the slide extension: Do I have to carry out the calibration every time the extension is installed and I use the F1 without it? and my 2nd question! If there are, for example, 4 coasters in the xcs, do I have to align them exactly and then measure exactly this distance on the extension and then align them? Sorry, I'm a beginner with the F1. best regards from Dortmund/Germany

@QuiltersHandyman 3 ай бұрын

Does this setup....F1 and slide....work with lightburn?

@Billyh0td0g Жыл бұрын

I just recently purchased this to try my hand at laser marking and engraving with the rotary tool. Would the be able to make a durable marking on stainless steel tumblers?

@TripodsGarage Жыл бұрын

Yes, It will mark stainless steel.

@offsetmakerlab7514 Жыл бұрын

Ha! Those are the coasters we bought off your daughter at MRRF!

@TripodsGarage Жыл бұрын

Yes they are! Now you have KZfaq famous coasters 😂

@offsetmakerlab7514 Жыл бұрын

@@TripodsGarage My life is complete 🤣

@thegiftdesigners Жыл бұрын

Hey Tripod, Could you tell me how long the glass pieces took for the batch as a whole and an estimate on individual. We are getting ours delivered TOMORROW :) Great review and I'm sure the people will appreciate the glass etching tips.

@TripodsGarage Жыл бұрын

It took about an hour. This was at a high DPI, if you were to drop the DPI, of course less detail, it would go much faster. Hope people will benefit from the glass etching tip 👍

@robr4379 11 ай бұрын

Ok looked awesome but have a couple of questions 1 what is the reason for painting exactly and 2 have you done any tumblers or coffe mugs

@TripodsGarage 11 ай бұрын

For engraving glass you need an interface layer. Tempura paint is one of the easiest methods. Yes, I have done mugs and tumblers. Thanks for watching and commenting 👍

@robr4379 11 ай бұрын

That's good do you have any videos doing some and if not could you make a video I would love to see it do tumblers and I glanced quickly through your videos and didn't see any

@ElizabethRodgersoneandonly 3 ай бұрын

Does the paint type matter? I have acrylic, wondering if the point is just to make the glass black, or if the tempura paint has a special chemical

@ElizabethRodgersoneandonly 3 ай бұрын

(I also have cermark on hand)

@TripodsGarage 3 ай бұрын

I just found that Tempura paint is the easiest. It just washes off with hot water. If you go with too much power the etching can get slightly black. I would thin it out, and don’t use a brush. Brushes are a pain, they leave an uneven surface with small gaps. Just dip it like I did, and let the extra run off. Or you can pour it over the glass and tilt the glass and let the extra run off. I haven’t tried Tempura paint with clear acrylic, as that might make the etching slightly black.

@3DHP Жыл бұрын

A slider for a Fiber Laser. How Cool is that. One of these days I hope to get or review a fiber laser. Great idea,dipping in the paint.

@jamesmyers2087 8 ай бұрын

I etch my glass bare. What does the tempura paint achieve?

@TripodsGarage 8 ай бұрын

What type of laser are you using?

@jamesmyers2087 8 ай бұрын

Muse Titan 90w co2 Chinese co2 60 w Epilog Zing 40watt Gas bought but haven’t received my F1 yet. I’ve etched glass on both the Zing and Chinese co2. I have found that the etched field can have something of a minute texture. When you answered another commenter about it being an interference layer? Is the texture more smooth, uniform? @@TripodsGarage

@ShyneflowLC Жыл бұрын

Air brush for tempura dilute with water :)

@TripodsGarage Жыл бұрын

100% true! I have a portable air brush kit, and do that as well. However, this was for the people that do not. Very easy, and you can just seal the container and use it whenever you want.