Great video! My WeCreat is completely awesome!

Your arcdroid plasma cutter make a video showing the THC torch height control i wanna see

To Purchase and Save $800 - US Store: bit.ly/3R54XIp EU Store: bit.ly/453DBI4 DE Store: bit.ly/3QZpZI3 FR Store: bit.ly/3UUTsUS UK Store: bit.ly/3x0VIBW

please make tutorial how to to clean up what you wrote using a 20 watt fiber laser

My new printer be here this Tuesday the 10Th :) The old man is making the jump into the 3D world!

You just save me hours of cursing in Spanish 🎉 thank you!

Oh my god, I wish I found this video 2 hours ago…. Let’s hope this works!

In my contracts it is always written that we don't know what your base is made of and that if its bad additional costs will be charged. However you didn't get ripped off. As for your ''taking a simple of my driveway'' come on... that would be ridiculous to do.

Thank you so much!

Thanks for going into all the details. Though I'm probably more in the market for a K1 Max, since I want a 300mm cube build area.

Good Sir - you are a gentleman and a scholar 🙂

7/3/4/2024 I had my driveway repaved just yesterday, it was similar in size to your, but had a attached carport and a tool shed they had to work around and it was last paved in 2003 with no seal coat in the following years so got quite rough with ruts and sink ages, that had to be filled in over the holes and sink ages prior to putting on the top coat with temps above 80*f, it took the large crew about 3hrs to go from start to finish and ended up costing me double what you paid, and you had 2 days prep and finishing with a lot more prep work done, plus getting rid of the nasty old driveway finish hauled away. To me you got one Hell of a bargain from what you recorded. I do like the video you made it was quite good on how steady it was in the breeze and the image quality. I wish I could of paid what you did as a lot more was done for you than I had done, but my end results were similar to looking like your, hoping it will last quite a few years before having to do it again. Don't forget the driveway will need seal coating in a year or more and the future afterward to extend the life of the asphalt driveway for weather and wear.

NEW SUBSCRIBER!! Thanks a million!!!! Great video!!! The holes for the bolts were stripped then I found your video!!! You’re the best man!!

This was infinitely better than the dogshit official assembly video they made for this. They literally still have the default extruder plugged in during that official video and said nothing about not needing that piece of shit red extruder that comes with the Ender 5 pro by default. It just defeats the whole point of buying this thing when they still imply you need the bowden tube and old assembly still hooked up and shows they have 0 faith in their own product, so I didn't buy one of these. I hope that idiot who featured in that video was fired.

Try z-hop bro

"performance anxiety" 😂

Yeah... ill be buying my crtouch today and those springs were TERRIBLE I've never seen springs so weak great video!

It looks so little and cute

My understanding is that the springs in the buildplate are part of the self-leveling feature. The Saturn 4 Ultra has them, as you noted, and the Saturn 4 Ultra’s build plate did move and compress the springs when you squeezed the build plate. I would assume the Mars 5 Ultra buildplate should of had the springs, and those springs should have compressed, like the Saturn 4 Ultra compressed, when you attempted to compress or squeeze the Mars 5 Ultra’s buildplate. Since the Mars 5 Ultra buildplate did not compress on squeezing, I wonder if those springs were missing, and that was causing failures on first- layer adhesion, and thus all your problems. Just a thought.

I WANT ONE! Now, if I only had $4K to get one...🤣 Great review and demonstration, John!

I was a loyal Traeger+ user for years, but after switching to Asmoke, I have to say the difference is clear. The precise temperature control that Asmoke offers is just amazing. The dual sensors and the new PID algorithm ensure temperature control within 5°F which makes grilling so much easier. Additionally, the portability of this grill with its lightweight, compact design is a game changer. I can now enjoy grilling on my camping trips without any hassle. I also appreciate the eco-friendly aspect of the wood pellets used as a fuel source, and the variety of flavors available add an extra layer of deliciousness to my grilling. Grilling has never been more enjoyable and efficient. I am so glad I made the switch to Asmoke. #Asmoke

The preloaded lead nuts are used improper, the sprung load should be forcing down with gravity. Instead they have the springs on the bottom pushing up, so the weight of the bed is resting on the springs instead of resting on the screw with the springs giving extra help driving the bed weight to the screw. Unfortunately I have seen all China printers using these in this manner and it is wrong. This may be the reason the mesh bed is so bad looking as constant up and down could pose the variability, but being high in the middle could be do to trapping the corners and heating it up do to thermal expansion. But what do I know I only designed AM for NASA, SPACE X, and BLUE ORIGIN!

John, good review! I'm amazed how much resin printer prices have dropped and the quality seems to have gone up. I sill don't have a need for them, and am very concerned about using resin, but do appreciate the information.

I bought this for my CR-10 Max and the fan shroud seems to have a special left hand mounting which won't let me install any of the recommended CR-Touch brackets STL's to print out... I am feelings a bit clueless, also for the filament sensor, no help in instructions for that...

thanks for your great review :)

Based on the other reviews I've seen, I agree that your unit was probably defective. I'm glad Elegoo is eager to replace it. One thing I wanted to remark on is that I would avoid inverting the build plate to keep any resin drippings from contacting the upper part of the the mechanism. Thanks for the review!

Well, done Mr. tripod keep it up. You are awesome, but bear is even more awesome.

The little guy with the MRRF logo almost made it back with no issue, but nothing a little glue couldn't fix! Thank you again for that!!!

Xtool have a product exchange but just $200 for my F1 which I a. Still paying monthly 🤦🏻🫣

I would use riser to do panels for my granddaughters treehouse if your giveaway is still going on. I have the S1 but need riser base to do deeper jobs. I have conveyer but need more room to use.

How far does the PTFE tube go down into the hot end compared to the original hot end.

Unless you know whats under the blacktop no body can say whats going to need to be done i think the crew did good your blacktop failed because the base was crap now you got good base with 3 inch of blacktop it should last your lifetime

Hey! I was trying to dee your PMAG settings but for some reason my phone shows it really grainy. Could you share your settings? Id like to make my marine husband something haha😊

I was smacking my rotors for like 3 hours,so glad I found your video. I used a small bolt and nut initially and broke it and was stucked in there so I end up cutting it with a hack saw. I then used the bigger bolt and nut 12 mm and it came out easy. Thanks a lot and a new subscriber to your channel 👌

If something goes wrong don’t expect help from Ikier. The manuals are written by someone that doesn’t know what they’re talking about. They’ll string the conversation out till you have exceeded your frustration level. Then blame another department for failure to honor the Ikier warranty.😫

I think you ripped them off. You probably paid a cheap price had all that equipment out there and men power as well. They put you two different types of stone and used a paving machine on that small driveway. You watched them and took videos of the job. And then you put a video up asking if you got ripped off. It’s hot rocks oil and sand. That’s all asphalt is. What did u expect Driveway is probably the cheapest thing you could do to your house. $5-7 k for a 15 year investment that gets drove on multiple times a day from cars and trucks that weigh between 4-7000 pounds. Driveway sits out in the rain , cold , heat , frost , snow. Etc. people change their oil on it birds and pets pee or crap on it car drips gas and oil on it. What do people expect that’s less than 1 dollar a day over 15 years. You spend more than that on coffee every morning

Works perfectly. Took me 2 minutes to take the rotor off. A big thank you!!!

See that 7.20 mark - I dont like the design of the plate - the way resin is in the gap of the plate and you are bound to drop it some time. Why could they not have covered that gap and put a wing on it to hold it more securly. Its really put me off this machine.

I saw you at the 3d festival:)

Weird those settings are not working for me 10% won't even touch the PMAG

Can you share the settings? Thank you

Cutting wood is........smoking all the house....😒

What DPI are you using cause it says it’s going to take 6 hours.

You Sir, are my hero 😎 It worked like a charm 👍

Hi i have this printer but it's impossible print with cura a lots of problems please anyone can help me to manage it ?? normally i hav an ender 3 and a Flsun q5 and no problems with those printers but this one .... orrible , problems , problems , problems !!! please help meeeee !!!!

I do this with bolts both bracket holes at the same time and I seldom have to turn the rotor to break it fully free. My issue is my bolts mar so it’s hard to put the nuts on them to reuse. I guess I’ll have to look for harder ones.

this is cool, what software are you using to do the computer text graphics when you were unboxing?

I spent 2 hrs hammering got nothing, this method took me 30seconds, you are genius😂😂😂

Can I ask where you get your pet tag blanks?

buen video me as solucionado algunas dudas q tenia ,muchas gracias y nuevo sub ;) saludos desde españa