IKIER K1 PRO MAX 70 WATT LASER

Рет қаралды 22,141

3 ай бұрын

#laserengraving #pcbway #Ikier -
PCBWay: www.pcbway.com/
To Purchase - shareasale.com/r.cfm?b=231720...
www.ikier.com
Main Features:
@ikier
1. Beastly Performance: Equipped with the unique highest power laser on the market, the laser's actual optical power can reach 70-77W, making it more suitable for high-speed processing and deep cutting. It supports a variety of materials, enhancing work efficiency.
2. Resume Engraving: The world's first laser engraving machine with the capability to resume engraving after a power outage, preventing work termination due to unforeseen circumstances, thus significantly saving materials and work time.
3. Intelligent Z-Axis: In addition to the X and Y axes, the IKIER laser engraving machine features an exclusive intelligent Z-axis, allowing both electric and manual adjustment. Three-axis control makes it more intelligent and user-friendly.
4. One-Click High-Speed Autofocus: With the assistance of the intelligent Z-axis, it achieves electric autofocus, making laser engraving more precise and simple. The laser automatically focuses with just a physical button press, completing the process in only 8 seconds.
5. Sinking Cutting: Benefit with IKIER's self-developed intelligent motherboard and optimized laser working algorithm, it can control the automatic descent of the laser, reducing the focal length.
6. Super-Fast Working Speed: The machine adopts a motion structure of optical axis and linear guide, enabling ultra-high-speed and high-precision operation at 900mm/s. The engraving accuracy can reach 0.01mm at the maximum speed, greatly improving work efficiency.
7. Precision in Cutting: The IKIER K1 PRO MAX 70W utilizes 14*6W lasers to achieve a high-power laser of 70-77W. Its cutting capability is 90-100% higher than existing 40W machines in the market, able to cut through 25mm plywood in a single pass, equivalent to the cutting capacity of 120-150W CO2 lasers.
8. Upgraded Compression spot Coupling Technology: The laser focus area is reduced to 0.15*0.2mm with ultra-fine focus. High-density laser can cut 30mm paulownia wood, 18mm black acrylic, 12mm MDF, 30mm pine board
9. Newly Robust Structure: The machine features a sturdy structure with an optical axis and linear guide motion structure, modular design, and can be quickly installed in 15 minutes.
10. 4.3-Inch Intelligent Offline Controller: Equipped with a 4.3-inch LCD touchscreen intelligent controller, providing a larger display and more control functions. It allows the machine to work offline, freeing it from PC limitations, making engraving more convenient.
11. Safety Protection: The IKIER cares about your work safety with features such as a physical switch key, sensitive gyroscope displacement detection, flame detection, and other safety protection devices.
12. Intelligent Air Assistance and heat dissipation: The IKIER K1 intelligently controls the air assistance and laser cooler, automatically switching and adjusting their power only during operation so now you no longer need to manually adjust them. This also saves energy and provides a quiet working environment.
13. Built-in Air Assistance: The IKIER includes built-in air assistance accessories with a dual-layer wind guide design, always cleaning up the air vents and ensuring continuous airflow, thus preventing blockage after long-term use.
Materials Used -
6 Glass Drink Coaster Set -
amzn.to/44EWxfS
Basic Waste Grid 410x410 -
www.etsy.com/listing/13674426...
Tempura Paint -
amzn.to/3nJ7QD8
Honeycomb Laser bed -
www.comgrow.com/collections/e...
Camera Calibration
docs.lightburnsoftware.com/Ca...
Laser Material Setting -
cdn.shopify.com/s/files/1/067...
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #ATOMSTACK #ortur #xtool #laserbox #thangs #40watt 40 Watt laser Ikier K1 Pro

Пікірлер: 44

@LisaHarsh 3 ай бұрын

Bear and Oreo are so cute. Sawdust helps keep his fur clean and soft. Lot of boxes.

@TripodsGarage 3 ай бұрын

They are great pups! They love being in the garage 👍

@rayphilpot1946 3 ай бұрын

Love your laid back friendly delivery .. thanks for the vid 👍

@TripodsGarage 3 ай бұрын

Many thanks! Thanks for watching and commenting 👍😊

@TheEdgeofTech 3 ай бұрын

Nice work Tripod! This thing looks like a beast!

@TripodsGarage 3 ай бұрын

Many thanks bud! See you at RMRRF!

@sargonmedia 3 ай бұрын

This is sickkkk

@SuddenImpact53 3 ай бұрын

Very nice machine after you are done screwing around. 🤩

@TripodsGarage 3 ай бұрын

Yeah! This machine does make you screw around a little 😂😂

@jadams2013 2 ай бұрын

Thanks for the nice vid. Good work. Have you ever tried cutting bamboo. If this thing could cut through a .5 inch bamboo cutting board I'd buy it. Just don't want to plop 2k to find out. My 80 watt co2 will not do it.. the glue i guess. Maybe blue laser will?

@CaliVapor 18 күн бұрын

Any luck finding out?

@jadams2013 17 күн бұрын

Nope

@3DHP 3 ай бұрын

Great video Tripod.

@TripodsGarage 3 ай бұрын

Thanks Jerry!

@TheLouisianaHobbyGuy 3 ай бұрын

*Nice review Bro!* I just got the Atomstack 70. The only reason I accepted it is to put the module under the power meter.

@TripodsGarage 3 ай бұрын

Thanks bud! It is definitely a lot of screwing around before you can actually engrave anything 😂. Minus the enclosure leaks, it isn’t that bad of a laser. Certainly is a little over the top in power 👍

@1-Nice-Guy 3 ай бұрын

@@TripodsGaragewhat do you mean by having to screw around a lot before engraving?

@LeonardRadulescu-vk1fx Ай бұрын

Awesome . Have you tried to do a photo reproduction or carving or 3 d with this Ikier ? I'm wondering if i can do a good photo reproduction . Thanks

@1-Nice-Guy 3 ай бұрын

Great job on the review...the glass came out fantastic. How does the autofocus work...accurate?

@TripodsGarage 3 ай бұрын

Many thanks! The cutting board would have been perfect, only if I would have checked for paint on the other side 😂. You move the laser over your material, and press the autofocus button, just that simple! Was accurate for everything I used it on.

@1-Nice-Guy 3 ай бұрын

@@TripodsGarage great…thanks for the info!

@honda-s2k 3 ай бұрын

is there any laser cutters you would recommend in the $300 to $500 range?

@TripodsGarage 3 ай бұрын

Depending one what you want to engrave and the size of the items

@RoseKindred 3 ай бұрын

This was an informative video. I like what I see, for the most part, but think this may be too much power for me. I know that seems weird, but when you only need 1/4in or so, it can matter. Then again, the higher possibilities could be a nice trade off versus a 30W for only a hair cheaper.

@TripodsGarage 3 ай бұрын

Many thanks! It is a lot of power! As I mentioned, 1/2 material is about the limit I willing to cut. I am wondering what will be the power cap? There has been a huge jump in 455nm laser power over the last two years. Frankly, I think the limit should be 40-50w. Thanks for watching and commenting 👍

@zeroease Ай бұрын

What are the advantages of 70W power over 30W power?

@TripodsGarage Ай бұрын

Well with more power you can actually process jobs fast. Say a job would normally take a couple of passed, now might take only one. Or you can use more power, and have the laser move faster to complete the job faster. Of course there is the cutting, it can cut thicker material more efficiently. Thanks for watching and commenting.

@RK-qc6fo 11 күн бұрын

Hi, can it cut transparent acryl 3mm to 8mm?

@TripodsGarage 11 күн бұрын

It cannot. You will need a CO2 laser to cut clear acrylic

@RK-qc6fo 10 күн бұрын

@@TripodsGarage Thanks! so 40W CO2 laser will be able to cut 3mm to 5mm? What do yo think? )

@QuentinKarmark 2 ай бұрын

Did you attempt to cut (not engrave) metal items?

@TripodsGarage 2 ай бұрын

A 455nm laser is not intended to cut metals. So I didn’t attempt it.

@QuentinKarmark 2 ай бұрын

@@TripodsGarage perhaps not, except this guy is doing it with that exact machine. ( kzfaq.info/get/bejne/fa52iq6XxrvJpYk.htmlsi=QMKfNQSrF_v0xi0A )

@TripodsGarage 2 ай бұрын

@@QuentinKarmark 😂😂 When you made the comment, I knew you watched Chad’s video! Chad and I receive a lot of the same products, and support each other’s work. As Chad mentioned early into the video, that it “isn’t” suggested that you try it. We are talking very thin metals. You could think of the metal as almost like a veneer if you were to cut it out successfully. I did this on the xTool 40w video. I would suggest if you are wanting to cut metal by other means than a blade, get a plasma CNC, high power 1064nm 1k or higher laser, or CNC capable of doing it.

@QuentinKarmark 2 ай бұрын

Ok, appreciate the timely and thorough response… I actually have a need to cut very thin metal, and after seeing Chad’s video, was very excited to see if anyone else was attempting it with this or similar machines… especially at this price point.

@miuix4795 3 ай бұрын

18:10 it's 150mm/min not per second :)

@TripodsGarage 3 ай бұрын

Shh! You were not supposed to catch that 😂

@jameseler2898 Ай бұрын

If something goes wrong don’t expect help from Ikier. The manuals are written by someone that doesn’t know what they’re talking about. They’ll string the conversation out till you have exceeded your frustration level. Then blame another department for failure to honor the Ikier warranty.😫

@TubeDaLube 3 ай бұрын

Great review.I was about to buy this,the 70w was tempting.But I got the impression that the Ikier brand seemed a bit flimsy and on the lower quality side when it comes to build quality.And the way they have the wires,tubes etc is just way to messy for me.And i do believe that the bends you got on the enclosure is not from shipping,but bad handling at the manufacturer.To get these kinds of bends on items inside the box,the box itself has got to be badly damaged as well.I ended up going for the Xtool S1 40W,not perfect but i think that is a better choice then Ikier in terms of quality and usability....the thing the s1 is lacking compared to Ikier is camera and less power.I do believe the Ikier is more a cutting laser,and not perfect on detailed engraves,since it got a big spot size.Maybe that is no problem since you can change the wattage on this between 35w and 70w,making the spot size better for engraving in the 35 modus ?