Can you show how to do the wiring?

Great product and very easy to install. I installed mine in a 2015 Kia Optima and is currently running my grill light and will be hooking my dash and deck light to them soon. Tri-State PSE i get this from you and it was very fast getting to me, thank you.

Can you hook up lights to a different button for them to go back and forth or does that only work with the headlight button or can you have two switches do wig wag one for headlights and one for the white lights and can I hook up multiple lights to the wig wag setting

Hey Erick, Can you please show how you did the wiring setup for the lights in the demo to be controlled by the mini are the positive connectors connected to just the green or did you use two connectors from the controller. It would be much appreciated. Thanks

I have a question. Button 1 (top left) can be programmed as a wig wag as you demonstrated and button 2 (top right) changes the pattern. If wig wag is not currently switched on button 1, can button 2 be used to control anything else, or once you enable wig wag button 2 only controls the pattern. Basically if you push button 2 on its own can it do something else when you're not using wig wag? Thank you

Question concerning the flash pattern option (top two buttons): When turned off (either by top left or center bottom buttons), does it revert back to the first flash pattern when started up the next time ... or will it stay on the most recent flash pattern when restarted?

Good write up and demo. thanks

Can you order the mini controller a different color other than green?

Is there any special wiring needed for the headlight flasher to work besides the positive and negative hooked up to vehicle?

Can you use wig wags with your vehicle stock headlights and taillights

Does this unit have a parasitic draw when off? I am debating putting this in rv to run my outdoor lights. I want to turn off items that already have parasitic draws like usb plugs with leds in them voltmeters and usb plugs all draw from my off grid trailer. I want a control box to kill all of those and If I want them I will turn them on.

I have this.. using it for a sign is there a possbility to do wig waging with more than just two outputs? I need 3.

No master switch (one button that activates all the lights at once)?

great videos, looking forward to the next one!

with a dual color strobe white/blue is it possible to have steady burn on both colors as well as have them strobe by just hooking them up to multiple buttons or will I have to change the flash patterns to go back and forth

Will this work with there app? I've been looking for a siren for my pursuit car for awhile and have yet to find the one I like I've got a old school one that seems to work good but it's starting to go out any tips are anything I've been looking st this style well the bigger version are the whelen hhs style one

Hey does this device hook up to actuator for an electric sign?

Can you put the pattern change wire from the 2 fusion surface mounts to one of the buttons on the controller to change the pattern on both or just do it this way

always a great videos

So I have a question about the Fenix 4200 Mini Controller. I have a 20 inch single row off road led light bar manufactured by Aurora LED and I'm wondering if the controller will be able to handle carrying current to the light bar as well as my other led strobes without blowing the 20 amp fuse that comes with the controller? The light bar comes with a 10 amp in-line fuse. Also as far as powering my lights I'm assuming that the positive wires to the lights get their power from the controller but do I have to ground out the negative wires separately to the vehicle chassis or is there a grounding screw somewhere on the controller to hook the negative wires to?

When my controller is turned off there's still power coming out of the green and brown wires....doses anyone know why?

can you use any kind of lights or do they have to be a feniex brand?

Very helpful!

Does the wig wags work on any vehicle ?

Could anyone help me perhaps with some more detailed directions on how to use the momentary feature? I hooked the power and ground to the controller, power to the lights and ground to the lights ( 2 T3's), ran a wire from my switch which I programmed to be momentary, and attached that wire to the two blue wires on the lights, however I am unable to change patterns. Any advice is appreciated

I got an question hopefully you can help. I was trying to install the feniex 4200 mini and apply the wig wag compatible and when turned on its is very dim. Can you advise me on what I may done wrong

Can a button be programmed to scroll through menus, or they can only be a on/off?

Are you selling it or sold it already

Will the controller provide enough power for lets say 4 4" work lights as well as some T3's? It seems like just the little 14-16ga wire wouldnt be enough..

Is there a ta function?

Is this unit compatible with any strobe light or does it require led lights

How big is the ball mount? Compatible with Ram Mount?

Wondering how long the wiring harness is out of the box?

Eric, could I use this for a federal ms4000u siren?

6 button box for 200$ waste of money

how much does this go for?

👍😉😀

Fienex 4200 so cute

Im the 390th likes