Just a short, well as short as I could get, video of the installation of my new exhaust, including f**k ups. Enjoy
Пікірлер: 72
@adamhollick17 жыл бұрын
You're the only person I've seen with information about the stock v clamp attachment on the headers! (The round thing you pulled off) never had a clue how I'd get that off! Great video, very informative! Thank you!
@bentonhudson27873 жыл бұрын
Instablaster.
@marcocappiello024 жыл бұрын
Thank you so much for this video! I installed mine a few hours ago and without you I would have had surely a lot of problems!
@fergiewoo81904 жыл бұрын
Don't forget to send a pic. 🤟
@marcocappiello024 жыл бұрын
@@fergiewoo8190 Here it is mate! imgur.com/a/i1IJxxw
@daveb63454 жыл бұрын
Best cans on the market, love the SC gear. Sounds wicked mate :)
@oliovheaton6 жыл бұрын
Just looking at reviews on the street triple and came across your videos. Only gone and bought your actual bike this week! Pick her up on Saturday, can’t wait!!! P.s. thanks for taking good care of her 😀👍🏼
@fergiewoo81906 жыл бұрын
Oliver Simmons haha that’s made my day. Give me a shout after Saturday and you can have the original exhaust and tail tidy, as long as you promise to look after her.
@nigelyates71536 жыл бұрын
Fitted mine this afternoon......baffle out absolutely fxxxxxxg awesome 😁😁😁😁😁
@fergiewoo81906 жыл бұрын
Nigel Yates lol, now go make some f##%%*g noise!!!!
@milescampion501917 күн бұрын
No we call it a ratchet too, your spanner is called a wrench and shite I believe is shit. great video now it will be easier for me to do . ty sir.
@dan675t67 жыл бұрын
Hahaha I had the same reaction when I fitted my GPR pipe on my 2013 Street. You'll be riding everywhere in too low a gear just to hear the bike, love it. I had the ECU flashed for £30 at Triumph and it does make a difference. Ride safe fella.
@DaMaX747 жыл бұрын
Dan675T Which GPR did you get. I was looking at the Furore Nero for my Striple R. But I am charmed by the HP Corse EvoXtreme too. Only that's much more expensive.
@joaoluislacerdaattie61205 жыл бұрын
Nice job buddy! This noise is awesome! 👊🏻😎👏🏻👏🏻👏🏻👏🏻
@bizzmotovlogs68 жыл бұрын
yep i just creamed my pink n frillies.....now take those fuckin baffles out lol
@anzslayer7 жыл бұрын
Great quality video!
@andrewhulme86723 жыл бұрын
Hi I know your vid is a few years old but a quick question. Did you have any alignment issues with the bolt holding the can on? The support hole is a little out, not flush. No mater how much a wiggle the sodding thing. Any ideas? Regards Andy.
@fergiewoo81903 жыл бұрын
Hi Andy, sorry to hear that you're having an issue. The can should line up perfectly. Are you sure that you are try to line it up on the correct side of the hanger? You should also have a few millimetres of play to get things perfect. Do you have any pics you can send over?
@andrewhulme86723 жыл бұрын
@@fergiewoo8190 Hi many thanks for getting back to me. Yes it's on the correct side. Just had it off again and it's a little better. Still not 100% flush with the hanger but better than it was. The round gasket was a pig to get off. Nothing like yours. Had to use a screw driver and a hammer. The thing had fused it's self on. Also had to use a small file and some emery cloth to get the baked on gunk off! I've used Fuel end cans on some of my bikes and not had a problem. Anyway Top video and yep it does sound the dogs dangles ! Ride safe and thanks. 👍
@nigelyates71536 жыл бұрын
Bought one after watching this .....still waiting for the delivery 350 pound posted can't wait 😁😁😁😁
@fergiewoo81906 жыл бұрын
Nigel Yates You’re gonna love it.
@nigelyates71536 жыл бұрын
Fergie Woo just arrived happy days
@johnwhitehead48094 жыл бұрын
best place to get one, straight from sc?
@krom267 жыл бұрын
good vid man, and that sound! awesome
@steeley_3 жыл бұрын
Hey mate! Would I be correct in saying that the bolt you put in to support the end can is meant to blank the leftover hole? I've just bought one second hand and the can is supported with the stock bolt, I was wondering what was meant to fill the hole and that looks like the perfect size!
@ConstellationX18 жыл бұрын
Very nice!!! I have the same bike, 2015 model, wanna put the same exhaust on. Did you have to remap the ecu? What was the millage on the bike when you installed it? Thanks!!
@nizzmo1007 жыл бұрын
Good video mate..Looks and sounds good on the bike ...But I think I would go with the SC S1 just for the looks .
@fergiewoo81907 жыл бұрын
Mar Vel that works too 👍
@TheAlyJihad2 жыл бұрын
nice vid mate
@leebrady36403 жыл бұрын
Just bought the same bike myself, might upgrade to one of these . Can't help but think the rubber washer should have been flipped 180 degrees though 🤔
@tatatata9108 жыл бұрын
nice video!! nice sound!!!!!
@colindeans59722 жыл бұрын
Is this exhaust bonkers loud? I'm looking to replace the stock exhaust but don't want something that would crack me up on longer runs. Cheers.
@fergiewoo81902 жыл бұрын
Hi, nope it's just right. Loud enough to notice but not obnoxious like some others.
@colindeans59722 жыл бұрын
@@fergiewoo8190 Thanks
@kotimullapudi85583 жыл бұрын
Hi, nice video on installation. Btw, does it need ECU/FUEL remapping? Tnx
@fergiewoo81903 жыл бұрын
Hi, its fine without a remap, however when it went in for a service, Triumph put a new map in to suit the new can. They did this free of charge :)
@kotimullapudi85583 жыл бұрын
@@fergiewoo8190 that's great. Mine, I bought used bike & Triumph told they'll charge if they have to remap. I'm from Malaysia. Tnx for the info. Good day
@arcticaA188 жыл бұрын
top video mate
@MegaMaxymoo6 жыл бұрын
hey fergie...how do you remove the screw for the baffle without it falling down the pipe?...cheers pal
@jerryx20005 жыл бұрын
very informative video. Do you still have the bike? Any issues?
@huanngo72994 жыл бұрын
Hello, Do you know the inner diameter at the downpipe end of the SC Project? I have been looking for this information but did not find anything.
@fergiewoo81904 жыл бұрын
Hi Huan, Apologies, I'm afraid not and I no longer have this bike. Maybe a quick email to SC Projects would help. I'm pretty sure they would be happy to tell you. Good luck
@kristoferbeattie91717 жыл бұрын
Did it run OK after removing the cat, did you get it maped or anything?
@fergiewoo81907 жыл бұрын
Kristofer Beattie ran fine after fitting. Spoke to triumph and no need to remap. Sounds great, especially on overrun, lots of popping and banging 👹
@justridemotopov45626 жыл бұрын
Mini pig alert! @ 6:04
@franke68967 жыл бұрын
Nice sound! Was that with the baffle in or out?
@the_motor_nerd2 жыл бұрын
I am trying to get one of these SC project exhausts for my street triple. I stay in the US and these parts seemed to be backordered on the SC project website. Any recommendations on where else I can look? Thanks!
@fergiewoo81902 жыл бұрын
I have only ever ordered direct from SC. Maybe try a few forums, I sold my last SC exhaust to a chap in Texas. Good luck 👍
@GatecrasherSlim Жыл бұрын
like a flame grilled whopper they are made to order mate
@johnwhitehead48094 жыл бұрын
hi, thanks for the vid, did you purchase from italy or the u.k. they are i believe cheaper to get from the factory? regards john.
@fergiewoo81904 жыл бұрын
Hi John, I bought it direct from Italy 👍
@johnwhitehead48094 жыл бұрын
@@fergiewoo8190 cheers for the info.
@phamnguyen65046 жыл бұрын
Do you remap ECU after install
@bcmtn8 жыл бұрын
Holy edit this shix Batman.
@kousikpaul20577 жыл бұрын
How much price of your exhast which are you install...
@FithTajalie4 жыл бұрын
what is the model/part no for this exhaust?
@DaMaX747 жыл бұрын
So did you do a Arrow mapping flash too or isn't it Necessary?
@fergiewoo81907 жыл бұрын
DaMaX74 Took the bike in for a service soon after and had a chat with the senior technician. He said there was no need for a remap, but flashing it with an arrow map would be ok too. Left mapping as standard. Runs great 😜
@bwheezieadventures56994 жыл бұрын
Actually in the US of A we call it a ratchet too.
@fergiewoo81904 жыл бұрын
🤣
@MegaMaxymoo7 жыл бұрын
Where did you put the stainless washer that came with the SC?...Thanks
@fergiewoo81907 жыл бұрын
max bull from memory that went behind the rear hanger
@DJ-jb6bf5 жыл бұрын
Is that the S1 or Conical exhaust?
@harleyguy75 жыл бұрын
Is this the LAMS 660 bike?
@stebra_5137 жыл бұрын
it's the S1?!
@dustytriumph7 жыл бұрын
Eargasm!
@jonnyoliver50287 жыл бұрын
How do you remove the baffle?
@fergiewoo81907 жыл бұрын
Jonny Oliver just a grub screw and out it comes
@HawaiianSnow697 жыл бұрын
How much?
@fergiewoo81907 жыл бұрын
Just shy of £400 I think
@HawaiianSnow697 жыл бұрын
Fergie Woo thanks for the reply..tell me this, is it money well spent? I've the exact same bike as you. Just got her, absolutely love the this exhaust though. Great video btw!