Рет қаралды 48,557
Clear step by step how to instructional install on Triumph Quickshifter !!
If you have a daytona, with thanks to Kiwi Topes ! ( / channel )
This is how you do it !
2015 Daytona, couple of differences.
1. To take the chain guard off you have to take foot peg assembly off to get to the chain guard bolts on the inside of the foot peg assembly. Then to put it back on after setting the quick shifter and tightening the nuts, pop the ball assembly off the gear lever, remove the foot peg assembly put the chain guard back on, bike the foot peg assembly back on and then pop the ball assembly back and insert the pin and clip. It's easier than it reads.
2. The connector under the tank is mounted on the chassis. You have to detach it first by sliding it off before pulling the blank off and connecting the shifter.
My bike: 2014 Triumph Street Triple R
Film & Audio: Samsung S7 (2k capable)
Questions, comments ? Leave them below :)
Enjoy
,RoadRunner
___________________________________
Music Credits:
Tobu - Sound of Goodbye [NCS Release]
KZfaq link - • Video
Facebook link - / tobuofficial