Shit we get a 30 mins video cause of a troll . Keep trolling people ! And a cigar with the break job, straight class lol

What, a brake job without a bucket of rust on the ground,that's not fair........

Twas a dark and stormy night, with not a torque wrench in sight.

I’ve been keeping up on all your videos for a while now being that I went from an hourly position at a dealer for a few years to a flat rate independent shop for nearly a year now. It’s been a different world working on all vehicle makes with different scan tools and resources. I picked up a few tips to help my brake jobs go faster just by watching you do a simple brake job. I love the discussion talks but I’m hopeful that troll will inspire more videos like this!

Good to see that you bothered to clean the rotor mating surface, most techs failed to do that. Its good to see that you also didn't wire brush the brake anchors, corrosion is prevented this way.

Trolls are just people that have no idea about what we do or how to be a real tech. Keep up the great videos.

You make some of the best videos out there. Don't let anyone tell you otherwise.

The transmission funnel in use was absolutely breathtaking.... I was overwhelmed! Wow!!!!

LOVE LOVE LOVE THE NEW APPROACH , THIS IS WHAT YOU DO TO TROLLS AND YOU HAVE SERTINLEY BURIED HIM UNDER THE BRIDGE !!!

Strong silent type while working... that'll also piss someone off!

ha ha good response! 99 percent of us value your tool talk!! ha ha 30 minutes of it !!! love it

really enjoyed this video because we got to see your workflow as well as you showing both sides of the brake job for completeness. I picked up all sorts of little time savers, like the anti-squeal paste within arms reach and the yellow funnel that can support a full quart oil bottle.

Love to see more action Video's Mike😁

😂😂😂Absolutely love it! 😂😂😂 Get em big dog! I love trolls. I say "love me, hate me, either way your thinking about me."

I love videos like this one. Great music. I'm also a fan of your original music. Maybe next time you can play the long version of that one.

Great video! Keep up the good work Mike. I’m voting for a strat video!

You just smoked that troll like you smoked that cigar. He's sitting there in a pile of ash with chapped a$$. Haha! You sir are a pro and master of your trade. Keep up the GREAT work!

In Wisconsin we have to bead blast the brake bridges to get the pads to slide freely. Me personally I like to torque all tires with a torque wrench. Others in the shop don't. Great video! Nice to see how other people do jobs. Always something to learn ! That's why I watch.

Love your videos. I enjoy your tips and tricks also. Using a seam splitter to open up wiring harness is a Great idea. I have 4 of them now LoL 😁

Enjoyed this video. I believe you should do more like it. I get enjoyment out if watching repairs get done. Like I don't do enough at work haha. But keep up the great videos!

I just bought that same Milwaukee 1/2" impact two weeks ago and I got to say it hasn't failed me once yet. I call it "Big Bertha."

It really gets my goat how many tech's forget to check and top off the blinker fluid....it's maddening!

Does your cart have all 4 swivel casters? Been told on bigger carts there easier to tip over that way. Wanted to know your experience

Mike, just keep it up man! I watch your videos within minutes of you posting them. I'm looking forward to the meet and greet on my way back from Florida this summer!

Good job man! I stand with ya! Keep up the great work, videos, and advice!

He just trolling you ,lives with his mom ,cant hold any kind of job so he spends his time trolling hard working folks

Great videos, FRM, you are an excellent tech. I saw what looked like motor oil being drained later in the video..if that's the case, what was the fluid that was being sucked out in the beginning then?

Which caliper piston compression tool was that?

What grid sanding disc is best for cleaning rust off hubs? Yours looked pretty beefy.

Great Vid FRM. I am a new apprentice and love watching your channel. Especially this video because i can learn the way you work effectively. Thanks for the video.

I was dieing from this video. You kept looking back at the camera with fu look. 🤣

I have a question and I cant seem to find a solid answer and was wondering what your thoughts were? Brake caliper slider pins that have the little rubber bushing on the tip of the slider pin (usually go in the upper anchor bracket hole), what is the purpose of this rubber bushing? I have always found that the pin with the rubber bushing is almost 100% seized and causes un-even brake pad wear. I have replaced the bushings with new on some application and it seems that the slider pins are so tight and do not slide well even with the new hardware and proper lubrication. I have just plain removed them on some vehicles to achieve a better slider pin/caliper feel. What's your thoughts on this? thanks Chris in Canada

Watching this on my day off kinda gets me pumped for the rest of the week lol

My observation about the way you work as FRM is that, you enjoy what you do, you are NEITHER SWIFT NOR PROTRACTED. But the reason why you are the FRM is that all your actions performing a task are deliberate, methodical, stepwise (nothing haphazard or ad-hoc). In short, no mucking around. And you do every step once with intention, no repetition . In MHO, that’s why you are the FRM.

10:00 what does he use to clean those bolts & hub?

All those bolts were torqued to factory spec right? Hehehe

Screw me?, noooo screw you! 🤣 Eric would NOT approve of the small amount of brake clean that was used in this video.

I think only real techs understand your videos im a tech at a Napa Auto Care Center and like all your video's i really like the talk video's DIY is mostly for shade trees

I feel a Proper Funnel is one of the most underrated tools not only under the hood but in life in general , so keep doin your thing funnel !!

Your Saturday looks a lot like mine. Finally getting around to our stuff!!

I can't believe what I just witnessed! My head almost exploded. lmao

The troll didn’t even deserve to be acknowledged. FRM I show your content to my class because of it being so top notch. Just the fact that the troll is mentioned and receives attention gives them power. They aren’t worth your production time. Thanks for another cool video though!

Nice change of pace,keep up the good work!

Which die grinder were you using in this video?

3:20 do you get a lot of these carvana cars? Was this a customers or the company’s car?

Don't feed the trolls! That being said, you have the same problem I do with the brake clean....it doesn't make that sound when we pick it up like when Eric does it. I think our cans are faulty!

I actually enjoy this type of videos. You learn a lot by simply watching. Keep it up

Hey flat rate master what are y'all doing to that black 00 model tahoe I have a red one

Show them how is done FRM...!!! One of the best out there..👍

you and eric gonna race with 2 old rust buckets ? changing brakes . keep up the good vids ,greetings from the netherlands

Where's the tourqe wrench for your tires ???

Wish I could get one of those fancy cordless impact wrenches capable of the 140+ lbs of torque require to take off truck lug nuts. That would save me a lot of time.

Great video thanks brother. I just don't know what to say. Dang trolls. Keep up the great work see you in the next video thanks again brother. Trolls we all have them just have to over look the keyboard warriors some time

I tore my Achilles tendon and am stuck with my right foot in the air! what am I doing? Watching your videos and reading the comments! So far I haven't felt misled, Yes the cigar is what gives you so much class. The comments are GOLD!

Screw trolls your video always fun to watch and good reviews!

No transmission filter changed?

He'll with dumb people that don't know the real world of trying make a living. I'm wanting to come to Atlanta and meet you in person. Your an actually an good tech. I learn from you. I watch alot of you on KZfaq. Keep videos comeing. God BLESS

you are very fast nice job big brother keep up the good work and love your videos show us some more with you working have a merry christmas .

Back to the old days, I do remember all new rotors have to turn them before installed. no need to turn anymore? Thanks Great vid!

Air assist fluid extractor??? I have to pump mine! Was that a modification you did?

How lucky you are FRM to be able to enjoy the cigar in the shop while you work. I like the smell of the cigar but not so much the cigarettes smell. Good for you to have some cool guy's to work with.

Hey frm, love your videos! Whats the name of that die grinder accessory you used to clean the wheel studs( not the wire wheel but the one that fits perfectly over the stud) and where do you get them? 😂 cheers!

I’m a little disappointed over not torquing down the lugs

Forgot to torque the lug nuts and your gunna end up cross threading the studs And bolts if you just impact them on and not hand them on a few turns...

A day in the life. Great video.

Hey FRM can you tell me what those things are that you have at the end of your air lines that make them connect and disconnect easily

Haters gonna hate!! Keep doing what you do best!! Really enjoy your videos, have a great rest of your week!!

The FRM in action 👍

How do you like that 1/2 Milwaukee impact? Looks like it takes lug nuts off like butter.

no torque wrench was harmed in the making of this video.

I would love to see more videos like this if possible

Yea, screw him! We've all seen the tool channels where the guys buys tools and buys more tools, but nothing ever happens in his shop. That is, if he even has one. Here was have an actual experienced working tech in a multi-bay shop. The real thing.

You know he's serious when he has a cigar when working. I would classify that as a working tool in action!

Like new intro song.. felt like I was gearing up for episode of Roseanne with the last intro.👍

Nice tool review. haha. good video especially to prove your point. working very professional there

I don’t even have that tiny screw that holds the rotor on, the threads rusted out on my hubs.

From 1 tech to another. I know you use the tools you tell us about. how? 1 they are battered. 2 a lot of them are on our Master Techs cart too. Trolls be trolls man. keep up the good channel.

Great video and support u Chief but why caplier grease across whole pad and not just contact area! That drives me bonkers and makes it look like u didn't care,. Or is there a reason behind it?

I don’t blame u that would upset me to. I like the way you review tools you can tell you have used them. Remember that trolls want you to get upset with them I just delete and ignore them. People who watch you know you and trust your reviews. Great vid thanks

Nice under hood light

The master is a good, hard working guy

Why didn’t you clean the new rotors with brake cleaner before installing them? What was the stuff that you brushed on before installing the caliper?

Great video flat rate! 🔥🔥🔥

What kind of vehicle does the Flat Rate Master drive? Any videos of you working on your own vehicle? Thumbs up as ussual.

Your boss lets you smoke in the workshop? Nice video as always man keep up the good work, your channel is really coming along nicely 👍🏼

FRM..please don't let drooling trolls watching in their parents.basement get to you. Keep the vids coming.

That was awesome, keep up the good work.

sorry dude, I've been working as ASE Master / L1 with lots of other master certs and I've got to say. Your fire. Your what we call FLAT RATE HACK. Never flush or just suck out trans with out first removing trans pan and filter. YOUR FIRED

Bolt on brake job u get all the gravy!! Just trollin 👍

Wish they'd let me smoke in my shop LOL! Great video FRM and fuck the haters!

Every mechanic is a troll... we all give each other shit all day long... makes the day go by :)

I will take real and honest opinions over trash talkers any day. You make strait up vids intended to help people out and get ahead. I guess you must be doing something right if the trolls are giving you attention.

man I hope that milwaukee one key setting is +- 4 percent on that 140lb torque or else torque spec satan is going to be summoned

Man that looks like awesome cigar

One of the Best Flat Rate Master Videos To Date 😮😀😀😀👍🏼 I Really Like These “On the Job Series” Of Video Just 1 Question What is that Purple Stuff You Spooned On the Brake Pads FRM ? I’ve Always Used The Spray On Anti Squeal Compound 😎😀😊👍🏼

Great video Mike. Your tool see more work than that Troll. Great T shirt by the way.

Don't listen to trolls your putting out great videos. What gets me is if these trolls don't like your videos why are they watching,watch something else trolls. Anyway keep putting them there videos out FRM. PEACE!!!

Wow starting lug nuts off with an impact. Good way to cross thread lugz. Geez man.

Akebono pads. Good choice

Ace video FRM nice to see you doing your thing, and I'm surprised your allowed to smoke in your shop I'd get my arse handed to me if I sparked one up in mine. GP