Viewer Tries to Fix His Own Steam Deck

No video

Viewer Tries to Fix His Own Steam Deck - It Didn't Go Well

Рет қаралды 301,572

Күн бұрын

Viewer Tries to Fix His Own Steam Deck - It Didn't Go Well... A viewer named Kyle dropped his Steam Deck and then noticed the bumpers weren't working. He tried to fix them himself by using Xbox One controller buttons but couldn't get the buttons working again. So I bought the Steam Deck for $300 so I could make a video seeing if I can get it repaired.
►Tools & Parts I Use (paid link): www.amazon.com...
►TronicsFix Game Console Repair Forum: www.tronicsfix...
🎵 Like the Music? I use Epidemic Sound (paid link): share.epidemics...
SUBSCRIBE: / @tronicsfix
-----------------------------------------------------------------------------------------------------------
Instagram / tronicsfix
Facebook / tronicsfix
Twitter / tronicsfix
Website www.tronicsfix....
-----------------------------------------------------------------------------------------------------------
Tools I Use:
-Protech Toolkit: Amazon (paid link) geni.us/90il5y
-Torx Security T8: Amazon (paid link) geni.us/AEcBvZL
-PH00 Phillips: Amazon (paid link) geni.us/YGVSSv
-Tweezer Set: Amazon (paid link) geni.us/t0VrlcX
-Electric Screwdriver: Amazon (paid link) geni.us/2wbHzJ
-Thermal Paste: Amazon (paid link) geni.us/q2Prd
-Canned Air: Amazon (paid link) geni.us/CPYy
Equipment Used:
-Hakko Hot Air Station: Amazon (paid link) geni.us/y2JDR
-Nozzle for hot air station: Amazon (paid link) geni.us/zpEWlT
-Hakko Soldering Station: Amazon (paid link) geni.us/MTL0qb
-Hakko Air Filter: Amazon (paid link) geni.us/Gqznh
-Digital Microscope: Amazon (paid link) geni.us/fAw8d4Q
-Stereo Microscope: Amazon (paid link) geni.us/WBO3b
-Kester Solder: Amazon (paid link) geni.us/ETXUh
→Business Inquiries Email: steve@tronicsfix.com
TronicsFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this KZfaq channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TronicsFix does not make any claims of the safety of the projects, techniques, or resources listed on this channel and will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not TronicsFix. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
(*We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.)
Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”
The music used in this video does not require attribution.

Пікірлер: 360

@estrabetenovomultilaser1936 Жыл бұрын

Respect for you not mocking the guy who attempted fixing it, it's one of my pet peeves when KZfaqrs mock the guy who tried fixing it

@Tronicsfix Жыл бұрын

I applaud anyone who gives it their best. I do mock people who call themselves "repair shops" and then do stuff like this without making it right with the customer.

@VintageCR Жыл бұрын

Same! what good will it do though, giving a bunch of pointers but explaining it in a negative way(mocking). it's not giving the previous person a good vibe. While on the topic, the previous guy did his absolute best before he decided to put down his soldering iron. He fought with honor and was SMART to stop before things could potentially get worse. and being smart always wins.

@penguiin12 Жыл бұрын

yeah i see this a lot on car/powersports channels. they go meet some random person to buy some new project machine, tell the guy all their socials then really rip into them when they get the thing home. like, why would you do that? thats so rude when the person is probably gonna watch the video lol

@elyzky1 Жыл бұрын

@@TronicsfixPlease what's the name of the instrument that you use in your iPhone screen repair video to transfer old iPhone screen details to the new screen before installation?

@lukedavis436 Жыл бұрын

Yeah I've been mocked for trying to become a repair tech, i may only fix E-waste devices, have crap tools and not much experience... But we all start somewhere right?

@lbdjthethird1240 Жыл бұрын

I can appreciate one who tries to repair something themselves but knows when it is time to hand it over to the seasoned hand. This stuff is not easy to do even though you make it look like a walk in the park.

@Tronicsfix Жыл бұрын

Yep, you have to know your limits and when it's time to call it quits.

@Ashismohapatra278 Жыл бұрын

Well I've been watching his channel for so long that I've noticed that he's got nice and steady hands and good equipment with longtime experience

@lbdjthethird1240 Жыл бұрын

@@Ashismohapatra278 Yeah for sure he has developed that steady hand. I heard him recently say he used to be in the repair business but just does content creation for all of us now (which btw, THANK YOU FOR DOING). Dude both literally and figuratively has the hands of a surgeon, know what I mean.

@Gatorade69 Жыл бұрын

Watching these videos and others they make it look so easy but you also have to realize they have TONS of experience to make it look that easy.

@Gatorade69 Жыл бұрын

@@lbdjthethird1240I mean technically this is electronic surgery. That's my problem is my hands aren't steady at all.

@SiggyPony Жыл бұрын

The original owner got so close to fixing it 😅😅 I hope they continue and get better :) its really important to be able to fix your own things I think.

@Tronicsfix Жыл бұрын

Yes! They almost had it

@Dj1Crook Жыл бұрын

which is where right to repair should be easily accessible for everything

@CaptainPupu 11 ай бұрын

Absolutely, it's a must have skill in life. A man should be well versed in fixing things. Not necessarily deep stuff, but basic things. Cars, bikes, a chair etc. Important life skill for sure.

@HardWhereHero 6 ай бұрын

@@Tronicsfix Dont they make the PCB with the button attached already? Could have swore I seen em on AE.

@bowserpeach-eater8311 5 ай бұрын

@HardWhereHero I don't think so valve won't even sell them to ifixit, apparently the board must be configured at the factory according to them, there is definitely used ones out there but people are often asking 150$ for it, and also there is two different daughterboard model revisions and you have to get the right one for your steam deck

@Bulk_eats Жыл бұрын

I hope the original owner continues to practice and improve their repair skills. We all make mistakes, but correcting them is very satisfying!

@donaldino4669 Жыл бұрын

Mister Porter, watching you trying to repair stuff, trial and error, making assumptions why it doesn't work, trying again and failling, keeping your cool, explaining what you think is the next step and continuing until resolution and sometimes a "yeah it works!" is one of the most relaxing stuff there is lately on youtube. Thanks for sharing those good vibes with us.

@paladingeorge6098 Жыл бұрын

Its nice to know that even if you weren't able to fix the buttons, you can always replace the module itself with an OEM part. Im glad Valve made OEM parts available for sale.

@senpailonestarr2787 10 ай бұрын

This part isn’t available at ifixit.

@lenorkhide2873 Жыл бұрын

I really liked how you were describing some of the issues you were having and why you switched to different irons. I also really liked just the talking through of some of the technique to what you were doing. Seems like a subtle change to the normal format. I really like it

@lenorkhide2873 Жыл бұрын

Same with the descriptions of chasing the grounding issue and what conformal coating is for

@Tronicsfix Жыл бұрын

Yes, I’m trying to do that a bit more

@2dthoughts Жыл бұрын

$300 for broken electronics seems crazy, even knowing 100% you can fix it

@TheFallingFlamingo Жыл бұрын

To be fair, it was only two buttons that were broken. Those account for a fraction of a fraction of the MSRP of a Steam Deck. The device was still totally usable, it was in good condition, and, very importantly, it was easily repairable by the *buyer.* Even if the buttons hadn't been fixed, one could still attach a Bluetooth controller, a keyboard/mouse, or remap the buttons in SteamOS software.

@brucepreston3927 Жыл бұрын

He bought it for content, and will make back way more than he paid by making a video on it...Most people wouldn't pay that much if they were trying to flip it or something...

@2dthoughts Жыл бұрын

@@brucepreston3927 i understand why he bought, but not a reasonable ask in my opinion from the seller

@Xelief Жыл бұрын

@@2dthoughts Nothing wrong with Tronics giving him a bit of a break

@mobrocket Жыл бұрын

@@TheFallingFlamingo I don't understand what you are saying The point is $300 for a broken steam deck is high, when a new one is $399 Granted he does it for content, so he will easily make that back and after the resell of it

@TemptationS666 Жыл бұрын

I have NOTHING but the utmost respect and appreciation for you TronixFix! A TRUE modern day Tech Hero.... When companies don't want us to be able to fix our own devices and contribute to the "just buy a new one" mentality.... THANK YOU for uploading these videos and showing people (maybe if not always super in depth) how to repair or at least ATTEMPT to repair their devices

@Ryan_DeWitt Жыл бұрын

Steve makes it look so easy! I can micro solder too! Will take me 5 minutes. 2 hours later, "oh crap, I really F'ed this up." Maybe I should have practiced first on some electronics I don't care about.

@Tronicsfix Жыл бұрын

Lol, it takes some practice

@captaincrunch1707 Жыл бұрын

I bought a cheap $10 case just because of your prior video on damaged(dropped) deck bumpers. The case has a raised edge that’s higher than the bumper so it will take the brunt of a fall instead of the delicate bumpers.

@Tronicsfix Жыл бұрын

That’s a great idea!

@MMuraseofSandvich Жыл бұрын

Much respect, man. Even with a microscope I probably would have just begged Valve support for an exchange like I did when the power button on my Deck no longer aligned with the switch underneath. Those pads are part of a huge ground plane and without any thermal relief spokes, and I've learned the hard way that these are a huge pain to solder to.

@Goldrush1988 Жыл бұрын

Ive started buying broken retro consoles thanks to watching you're videos. Its so much fun bringing them back to life. Now to bring myself to start selling them. They have entered my collection and its difficult to part ways with them now lol.

@gokublack8342 Жыл бұрын

I've fixed some Xbox Ones a PS4 and a Wii (Ig Wii is the only really Retro one) but part of me always wanted to try to fix a gamecube(Such a fan of those) have you ever revived a Gamecube?

@Goldrush1988 Жыл бұрын

@@gokublack8342 No I haven't but I did buy one recently so I will in the near future.

@capsel22 Жыл бұрын

kudos to anyone who tries to fix their own kit. I honestly thought that person did a pretty good job, better than I would have.

@DeepThought420 Жыл бұрын

You're a true Superhero to all of us gamers! Thank you for another awesome video! 🎉🎉🎉

@Tronicsfix Жыл бұрын

My pleasure!

@TheNeoMassacre Жыл бұрын

Steve the Perfect Amount of Thermalpaste on that Steamdeck would make it even more Perfect.

@Tronicsfix Жыл бұрын

Lol, true

@dadrunkcanadianlive440 Жыл бұрын

Watching soldering & stuff is super interesting. I love taking things apart & putting things back together. I only do minor cosmetic changes & it’s fun to do.

@CreatingArt3185 Жыл бұрын

Props to the original owner for giving it a go plenty of people would’ve just chucked it in the bin 🗑️

@srbnat Жыл бұрын

I hope those people will tell me their address

@Tomazack Жыл бұрын

No one's that stupid unless they're filthy rich. It usually ends up as a scam on eBay or sold for parts on eBay if the seller is honest.

@glutentag5853 Жыл бұрын

It's crazy how well controlled your fingers are, I can't hold anything without shaking. Also it always shocks me when I see the size of your finger against the electronics

@Tronicsfix Жыл бұрын

I’m actually pretty shaky. It’s all about positioning and support

@TimInertiatic Жыл бұрын

@@Tronicsfix good to know. Next time I have a broken electronics thing I want to give it a go, but I have proper shaky hands 😁

@ztechrepairs Жыл бұрын

Dang glad the gent stopped when he did. That repair could have been a lot worse lol.

@12345....... Жыл бұрын

I respect the effort by Kyle. Worst case scenario, it still needs to be fixed.

@Tronicsfix Жыл бұрын

Yep. He was so close!

@keithdavison2960 Жыл бұрын

Just a quick note I have been looking for a how to video for a console task and KZfaq has some very dumb people trying to explain things they clearly don’t know, then I found you and your channel and a Video explaining exactly what I needed and you articulated how to as well as the pitfalls in less than 3 minutes, thank you so so so much you rock

@Touch_Grass_Fr Жыл бұрын

Another day fixing stuff Great work!

@Tronicsfix Жыл бұрын

Thanks 👍

@gabe2252 Жыл бұрын

I love the steamdeck repairs the most.

@digitaldonovin1189 Жыл бұрын

I dropped mine within the first few months of owning my deck. My bumper would not reach the button. But instead of removing it and soldering it like 1 or 2 mm higher. I just got a tiny piece of paper and folding it to create a bridge between the bumper and button.

@Tronicsfix Жыл бұрын

Great idea! the bumpers get damaged a lot because of drops.

@TheSkaldenmettrunk Жыл бұрын

Nice fix. Shoutout to Kyle for trying! 17:19

@isledon Ай бұрын

Thank you so much, this was me. Hopefully now I can fix my mistake and if not share this with someone who can 🤣

@blutey Жыл бұрын

You're very patient and methodical with your fixes. Good job on figuring that one out in the end!

@Saadi_Lyfe Жыл бұрын

Loved the video and the diagnostics we get to learn from you... thanks 😊

@trevor245 Жыл бұрын

he didnt even do that poor of a job. Like you said, he almost had it.

@Tronicsfix Жыл бұрын

Yep, exactly

@justinc9991 Жыл бұрын

Micro-soldering is not your best friend BUT u fixed and that’s a huge win! GL!

@rairai5114 Жыл бұрын

I'm not into fixing stuff, or even engineering, but I find your videos fascinating!

@ItsHyomoto 8 ай бұрын

Good lesson here: channels like this can give you confidence and advice, but Tronix also does it for a living as well as has dedicated tools for it. It definitely isn't as easy as he makes it look!

@patterisepi Жыл бұрын

Your workmanship is usually top notch so when the solder joints on this one are tiny bit crooked I noticed it immediately :)

@DCstar Жыл бұрын

I think it’s nice that the person tried to fix this on their own but practice makes perfect.

@virgildeklerk Жыл бұрын

Very nice fix Steve, i know how hard this is, i've replaced a xbox one controller micro usb port with trace repair ones pfffff so difficult but i was succesful. Keep up the great videos

@brucepreston3927 Жыл бұрын

I'm learning how to replace those small ports myself, and it has been much more difficult than I thought it would be...I don't have the best tools, but i've managed to successfully replace 10 or so of them...I really need to get a microscope though!

@Tronicsfix Жыл бұрын

Nice work!

@nhand42 Жыл бұрын

I reckon that middle "pad" was actually the ground plane. It was far too close to the neighbouring pads to be from-factory. The previous owner probably scraped through the original middle pad and exposed the ground plane.

@thomastartu9597 Жыл бұрын

It looks like someone who has some basic skills had tried to fix this, but unfortunately was unsuccessful. And they were that close to getting the job done!

@1998LeonSKennedy Жыл бұрын

At the moment I saw the almost inexistent pin I thought "Why don't you just cover the whole pad and use the wire directly into the button?" Guess that was really the perfect solution XDXD Amazing to see and guess on these repairs.

@Hectic_Times Жыл бұрын

I have never worked on electronics in my life besides replacing batteries in the remote, still completely entertained by this.

@LightPhoenix7000 Жыл бұрын

On that left trigger button, maybe it didn't show as well on camera but it looked like the left leg's pad had excess solder over the mask. I wonder if that was causing a bridge there rather than any issues with your wire soldering.

@Tronicsfix Жыл бұрын

That's possible.

@effingandjeffing8270 Жыл бұрын

Yeah look at 8:25 it's joined the the corner of the next pad.

@CBarker151 Жыл бұрын

Great video as always. The microscope output really helps see what is going on, but hides the truse scale of what you are doing, until a finger comes into view!

@DanielMcGeary Жыл бұрын

Such a dope channel.

@bryans8656 Жыл бұрын

I never tire of watching you troubleshoot and fix gadgets.

@RGInquisitor Жыл бұрын

I did a similar "repair" on my own Steam Deck. The right bumper came from factory with no "clickyness" to it. It still worked fine, however I hated how the left bumper was all nice and clicky and the right one was all mushy. After watching a previous video of yours, I bought some Nintendo DS Lite microswitches and swapped out the right bumper myself. It went great! However, now I have a different issue.... the left bumper is not as clicky as the replacement!

@M1H1yt Жыл бұрын

People try fail but tronicsfix never fails at tech

@SApcProSergijAleksovski Жыл бұрын

Wow, such a hard job. Congrats!

@Tronicsfix Жыл бұрын

Thanks!

@mongo6167 Жыл бұрын

I never think that the stuff your soldering is that small until I see a finger come into the screen and it’s massive!🤣

@bigdawghoss9871 Жыл бұрын

Can confirm. I'm rather seasoned with electronics repair. And swapping out the buttons for the steam deck was tough. The screws are very delicate and tend to strip easily. And the power connectors for each control board module break so easily. I was so gentle with them and one cracked. Luckily half remained and i secured it with Kapton tape. But i definitely don't plan on cracking it open again unless absolutely necessary

@jimmymyers Жыл бұрын

Would love to see you try to fix a broken microsd slot on a ROG Ally. Mine fried itself and i had to return it.

@Tronicsfix Жыл бұрын

I’d love to! I’m watching for broken ones

@MahmoudYahyaoui Жыл бұрын

Small mistake not testing continuity on the button before assembly :p great video as always

@gsuberland Жыл бұрын

Looks like the initial repair attempt cut the soldermask off the top layer and found a buried ground via under the pad, and assumed that was the connection point. Not entirely surprising on HDI boards.

@furqanbangash Жыл бұрын

This is very satisfying to watch.. keep them coming...

@vadnegru Жыл бұрын

Valve actually made a good job making this much test pads. If there are schematic freely available it would make any repairs easy.

@JimNichols Жыл бұрын

Drank too much coffee this morning didn't you Steve? lol.... Great video bro! As usual the scripting, editing and videography is dead on the money.

@mtshark7 Жыл бұрын

Nicely done Steve!

@ashhks Жыл бұрын

Hey Steve, I'm a big fan of your channel and videos! Thank you very much for all your efforts. I think it would be fun to see you try to fix some steering wheels. Wish you all the best my friend 🙏

@somethingfunnyyt Жыл бұрын

Because of how separated the mother boards are in the steam deck, wouldn’t it just be easier to replace the shoulder button boards?

@djust270 Жыл бұрын

This is exactly what happened to my deck. I put it in the case, and picked up the case without it being zipped up without thinking. Fell hard on the right shoulder button. Valve fixed it for free.

@mangakey Жыл бұрын

Damn this channel really blew up I remember joining back when it had less than 100k subs...

@aerodigital Жыл бұрын

Spills are a friggin nightmare for these things. You can fix them, they will work, but getting the button feels back to the original is very hard. Didn't know the Xbox switches would fit, going to order a handful of those! Of course going to use a heat station to repair so no ripped pads. Don't get junk in your touch pads, those are on the bottom and you have to remove everything including the screen to clean it thoroughly. Nice video!

@Dragoncb456 11 ай бұрын

I think the problem you had with the first button repair was that the pad was grounded already on the board prior to you soldering the button back on I still saw solder connecting the far left and center pads. But that is just a theory. Though, good thinking on raising that pin and just routing around the pad. Love your videos, oddly satisfying to watch especially with the soldering.

@duramirez Жыл бұрын

Imagine having a robot arm that can move smooth and precise at that level of magnitude, for repairs like these? would be awesome ^^

@outfield1988 Жыл бұрын

I like low melt solder when desoldering. I am addicted to it

@flyinryanfpv Жыл бұрын

I'm jealous! That's a great deal!! Cheers Mate 🍻

@user-oi4eg7rq8w Жыл бұрын

The surgeon of electronics

@jdplumber007 Жыл бұрын

Great content. I want to see an episode where you buy 5 broken Tesla's and try to fix them lol

@truthhurts3524 11 ай бұрын

I’d like to think I could fix it myself, but know I’d just mess it up even more. After saving up $$ to buy one, I’m super careful with my deck, fingers crossed it stays just like new. 🤞🏽

@OperationDecoded Жыл бұрын

I suspected a short first but then when I thought you fixed it (and so did you) it turned out it didn't need to be connected the way it did but how did you know that in the first place? It was not just guessing I assume?

@thiago4santos Жыл бұрын

Guys this skill isn't like screwing some screws, it seems easy because he is a professional. You will break your electronics if you try to do this without experience.

@Xmifi_ Жыл бұрын

Would you do a video on all the tools you use like the magnifying camera and share some tips?

@Tronicsfix Жыл бұрын

Great idea! Might have to do that sometime

@matemagyar9446 Жыл бұрын

I tend to forget how small these things are.. I was wondering why did you bother/struggle with the mask, then you put your finger there , and I realized how small place was there.. maybe it’s just me , but it’d be wonderful if you sometimes zoom out to “real life” so we can see how precise you have to be. Keep up the good work, love your vids and your mentality!

@ExperimentalCreat0r Жыл бұрын

I love this channel so much, it made me learn abt consoles, how 2 fix, etc. And now i wish i had my ps1 back so i could open it

@mavowar72 6 ай бұрын

Hope your health is getting better Steve

@isaaccervantes5955 Жыл бұрын

We have right to fix , sometimes w just get it wrong . Glad you could help him out

@charliehamnett5880 Жыл бұрын

Yeah this kind of stuff always seems alot easier to follow on a video by a professional and then you go and start opening your hundreds of dollars worth of tech and you have to use a bit fo force in certain areas and you hear the shell crack and then you see the flimsy fragile ribbons and it's so easy to get intimidated or lost following instructions even if they're super clear and we'll done.

@James-gj8rn Жыл бұрын

I've never seen inside of a Steam Deck so this will be interesting (and for the record i love mine, paired with my PC build) :)

Жыл бұрын

i tought it wouldn't work, but you are the best! great job!

@matthewhardwick8208 Жыл бұрын

Maybe now I can understand why Valve did their own teardown video and said in all caps DO NOT TRY THIS AT HOME.

@CooLDEaFY4204Me Жыл бұрын

Wow good job Steve Impressive work

@Tronicsfix Жыл бұрын

Thanks! Glad you enjoyed.

@CooLDEaFY4204Me Жыл бұрын

Yea bro :

@robertpage2023 Жыл бұрын

I could see that the pin area on the left had solder still spread into the middle pin area. Get a grinding pen and grind a trench between those two pins. That solder mask only coated the touching solder. Once you get that trench ground out, THEN add the solder mask. OR solder mask all under the middle pin to insulate that middle terminal from the left side.

@fireteamomega2343 Жыл бұрын

That would work on a non layered board but with that you risk grinding into the next layer and hitting a trace. Some boards are twenty layers deep.

@Simcadepro Жыл бұрын

have to add lead solder first before the botton so the the lead will melt with a smaller solder tip.

@bringingbackthegore Жыл бұрын

This was an especially informative video. I always like watching trace repairs! Can you please tell me which digital microscope you use? I see you listed the Omano model on your Amazon lists page but I don't see the microscope with the screen that I've seen you use. Thanks so much for the help and videos!

@hawkfeather6802 Жыл бұрын

Repairing consoles is really hard, especially soldering tiny parts. The owner did pretty good! I'm still a beginner at soldering,but I'll keep practicing!

@outfield1988 Жыл бұрын

Helps to have a good iron hot air station and microscope. I practice on non fixable boards.

@HardWhereHero 6 ай бұрын

Why not just buy the PCB with the button attached? He went though all that trouble and could have paid $20 for the bumper with the button already on it... This dude is a legit magician. I have never heard him knock an individual for attempting a repair, no matter how bad it may have went for them. Cool.

@JhustineProvido Жыл бұрын

loved this video!

@mikaeldalc Жыл бұрын

Nobody with the name Kyle should be anywhere near anything so sophisticated. Get your life together Kyle 😂

@deanhayashi5299 Жыл бұрын

I’ve been binging your videos…and I don’t know why. I used to sell electronics at Sears. So I have some basic knowledge. Also in trying to sell protection agreements I’m glad to know when mother boards go bad they can be expensive to replace. Because that was part of my sales pitch 😅

@sarabihyena Жыл бұрын

$300 for a damaged min spec steam deck? It feels like people are getting very greedy with the prices of broken tech nowdays.

@grantrule6593 Жыл бұрын

Amazing Video Steve

@Tronicsfix Жыл бұрын

Thanks!

@ChristopherBurtraw Жыл бұрын

Kyle definitely picked up some tips and trick from you, just needs a bit more practice and patience.

@Tronicsfix Жыл бұрын

Yes, he almost had it!

@SoulDivide Жыл бұрын

How did h3 not see the solder bridging the gap between pads ? Lol. Of course that button isnt gonna work 😂😂

@seguramlk Жыл бұрын

Steve to the rescue

@TimidSylveon Жыл бұрын

I honestly don’t blame him! I tried jumping deep into complex repairs early on too when I started and ended up burning a hole through an Elite Controller PCB 😅. We all start somewhere, though! You learn from these mistakes and it’s better to try and save an electronic rather than what most would do: bin it and cause eWaste…

@Tronicsfix Жыл бұрын

Yep, sometimes you learn best by just jumping in

@timathypotato8034 Жыл бұрын

Really surprised those shoulder buttons aren't through hole, figured they would be since all the nintendo handhelds and controllers that use that type of button for the shoulder button are through hole

@marceloabreu669 11 ай бұрын

Seu trabalho é espetacular.. parabéns...

@Violaetor Жыл бұрын

Though you changed your job to engineer with all those bridges. ;P

@VAMPRESS23 Жыл бұрын

You know that solder Wick is actually use to be used in older cars for grounding

@ramajyello Жыл бұрын

The music is... a bold choice 🙃 But maybe I'm just used to your voice alone.

@HoneypawsModsDE Жыл бұрын

i find it pretty funny that you've used Red Nail Polish as "Conformal Coating"... That's a pretty cheap, yet super effective alternative and i love it 🤣 Fun Fact: You can also use any kind of Nail Polish as an electrical insulator when you delid a CPU to make it "Liquid Metal Ready", because some overclocker enthusiasts love to delid their CPUs, put Nail Polish on the tiny SMD parts next to the die to prevent shorts when they put their Direct-Die Coolers onto the Die with Liquid Metal, which is in my opinion a nice approach to save the lives of many extremely pricey Components (not only for CPUs but also GPUs and other extremely sensitive Stuff)