Just Like The PGA Tour, I Get My Irons Custom Built For Me

No video

Just Like The PGA Tour, I Get My Irons Custom Built For Me | TrottieGolf

Рет қаралды 178,600

Күн бұрын

Onion Master David Anderson from the KBS Golf Experience team walks us through the build process and what goes in to making an iron set flo.
Tour like precision equal to the PGA Tour is displayed as my set of TaylorMade P7MC Irons are built to perfection as I hand over the reigns and watch on with a keen eye.
New ferrules from BB& F Co is a huge step for me but demonstrates the level of custom available to all of us through the KBS Golf Experience process.
Puring or floing the set is also completely new ground when it comes to iron shafts , this ensures a consistent flex is achieved throughout.
Learn more about the whole process below and be sure to #subscribe for more:
KBS Golf Experience : kbsgolfx.com/
KBS Golf Shafts : kbsgolfshafts....
BB&Fco Ferrules : bbandfco.com/
P Series Irons from TaylorMade Golf : imp.i366014.ne...
Happy #tourtrucktuesday :
Instagram: / trottiegolf
Facebook: / trottiegolf
TikTok: / trottiegolf
Twitter: / trottiegolf

Пікірлер: 95

@golf007sd2 Жыл бұрын

Billy is one of the BEST builders in the USA. He has been my custom builder for well over 5 years. From my Hogan PTx's, to my current Wilson Staff CB's to all my wedges. Cannot speak highly enough of his skill and all those at KBS Golf Experience.

@Gramkan Жыл бұрын

You know trottie hated every second of someone else building his clubs

@trottiegolf Жыл бұрын

You know me too well…… this was a tough one for me to make and not get too involved 🤣🧅

@standardh_ Жыл бұрын

I went with the same Hogan-inspired look! 👌🏼

@elgeneral72 Жыл бұрын

@@trottiegolf Someone must have odds on: How quickly you measure and put on a swing-weight scale How quickly you bend How quickly you re-assemble How quickly you shelve and build your own. 🤣🤣🤣🤣

@trottiegolf Жыл бұрын

@@elgeneral72 🤣😂🤣😂

@ND-jz7yk Жыл бұрын

Trottie took these apart and rebuilt them as soon as he got back home lol

@billhamlin9689 5 ай бұрын

Awesome as always! Love your videos.

@trottiegolf 5 ай бұрын

Yea this Vid ripped, thanks for tuning in.

@jazzyjay4595 Жыл бұрын

If you’re in Florida, Moon Golf does the exact same thing but with every brand of shaft/club. Fitting bays 20 feet away from the build shop. The builders go through the exact same process. I’ve had them build my entire set, drive to lob wedge. Pure’ing, swing weighted, exact length, lie and loft, and with tour level quality control.

@Reffitt2 Жыл бұрын

I absolutely love these videos, Trottie! Just true craftsman building incredible sticks with zero compromise!

@allenpeloquin4492 Жыл бұрын

I've enjoyed all of these videos

@trottiegolf Жыл бұрын

Happy that you’re happy with them 👊🏻

@larrywhalen Жыл бұрын

Very very cool to see the process where my driver was built! Can’t recommend these guys at KBS enough- they are awesome to work with!

@hithisisng 5 ай бұрын

This is the difference between assembly line and a master craftsman

@stevedamm9553 Жыл бұрын

The black steel shafts seem to have a nice contrast with a satin head.

@stphn8 Жыл бұрын

Production quality looks mint! Keep up the great content Trottie!

@sammora470 Жыл бұрын

Loved watching Trottie stress whilst he watched someone else do his passion for him. Double checking the shaft length against the grips, you had me bloody nervous there, had me wondering if scottsdale did mine right haha. Only difference is I'm probably not good enough for it to make any difference.

@trottiegolf Жыл бұрын

🤣😂😅😅😅😅😅

@kevintee7437 Жыл бұрын

Trottie a sick looking set of clubs.

@garygary8856 3 ай бұрын

sooo sick!! i can't wait to get fitted!!

@jmrm0478 Жыл бұрын

In love with this process

@wildman166 Жыл бұрын

Rock on Trottie !

@markchazz6117 Жыл бұрын

This is great. Just got the phantom black p790. Probably could do my own “prism” build. Thanks for Sharing Trottie! Clubs look amazing.

@DIARRHEA-PANIC 10 ай бұрын

That set looks 🔥 📛 👨‍🚒

@danjohnson6292 Жыл бұрын

RIGHT as RAIN!!

@jonathanm9200 Жыл бұрын

If you could draw a "craftsman" throughout the ages they would look like Billy.

@davidgolf3245 Жыл бұрын

I got a set of Mizuno 923 tour irons coming soon with KBS Tour Lite shafts. Can't wait to put them in play and see what those bad boys can do for me. Been hitting those shafts on a demo club, but will be fantastic on my own clubs. KBS makes an awesome shaft!!!!!

@michaelgillies9075 Жыл бұрын

The tour lite shafts are👌,I’ve got them in my P790 and I won’t use anything else

@TJCombo67 Жыл бұрын

Love the building vids, fitting vids too

@mattjons1074 Жыл бұрын

Loved these KBS videos 👍🏻clubs look amazing

@TheTraditionalGolfer Жыл бұрын

Trottie chomping at the bit 😂

@CraigalFun Жыл бұрын

Need this in the UK!!

@paparoachschecter Жыл бұрын

Hopefully one day I could afford to get custom fitted for a set! 😊

@ronmarcelo8551 Жыл бұрын

Anybody get the feeling that Trottie is gonna take this set and rebuild it himself? Haha

@trottiegolf Жыл бұрын

🤣 I think he did a solid job BUT I was watching 🤣🤣

@merkeva1841 Жыл бұрын

trottie is the new sergio for taylormade

@bertraminc9412 Жыл бұрын

My KBS Tour 90 shafts are wonderful but I’d like to get fitted there once!

@mr.p9496 4 ай бұрын

Sorry for my ignorance, but why you chose KBS build over TM build?

@michaelbardeleben4519 6 ай бұрын

Yeah...KBS ex is pretty cool...they fit exactly to what the customer wants...I had some concerns intially about fitting my old parallax irons to D4 with money taper 125+ but they assured me it would not be an issue... perfect customer service and focus. Its not a cheap service but you get what you pay for. Ping just production build quickly like robots and shaft using this crazy air cannon which ruins alot of shafts in the hozel. But these are made by hand with love and care and top expertise....what's not to like?

@JPx412 Жыл бұрын

Trottie eyeing em like u gonna weigh that epoxy son!? 🤣🤣

@chrisbye8203 Жыл бұрын

Kid in a candy shop!

@keasy395 Жыл бұрын

Trottie please give us a course vlog with you playing

@Tee-PayneGolf Жыл бұрын

Irons just need a regrip, but could really use a driver and wedges! Thanks dude

@krisbalanecki6265 Жыл бұрын

Hey @trottiegolf coming down from the great white north later this year for my 40th and doing some golfing and fittings and would love to add Taylormade on my fitting list experience. So far im hitting up Cobra and Titleist but wondering what would be a good place to go to for Taylormade.

@jaychqpr97 Жыл бұрын

I'm really suprised they attach the club head by smashing the shaft down onto the floor... how can they be so confident they wont damage the shaft?

@trottiegolf Жыл бұрын

I've only ever seen folks do it that way. A square hit and it's fine, you're not hammering the thing, it's more of a firm tap. Trust me I had a lot more to monitor than that & the guys did a nice job 👍

@chrislewis50 Жыл бұрын

So when are we going to get the custom trottie irons? The way you would play them just like getting the p7TW tiger spec irons?

@GriffinGolf Жыл бұрын

Trottie threw a curve ball with the glue weight question

@trottiegolf Жыл бұрын

🤣😂 Love a curve ball

@henryxue10 10 ай бұрын

Great video Trottie! I have a question: what frequency of the shaft vibration was? Is there a correlation with the swing speed(head/ball)?

@trottiegolf 10 ай бұрын

Do you know what I didn't even check but yes there is a correlation. I just know they matched which was what I was conscious of

@roidAholic Жыл бұрын

called him out over that 1/8th of an inch and he re-marked the shaft 😂😂

@trottiegolf Жыл бұрын

If it's not right it's wrong..... 🤣😂

@darrenclark2993 Жыл бұрын

Where can I get the same experience in the uk?

@spodbw1 Жыл бұрын

Could watch Billy all day, total craftsman. Do you fit yourself or does someone else come in?

@trottiegolf Жыл бұрын

I went through the whole experience. You can see the fitting portion here: kzfaq.info/get/bejne/otKPeMmWsNLKaaM.html

@richardc3676 2 ай бұрын

Was there not a tip trimming process?

@trottiegolf 2 ай бұрын

Not on my irons

@GregSmith-cw8xu Жыл бұрын

Is the spine meant to be installed at 12 o’clock looking at the club head at address or 3 o’clock?

@trottiegolf Жыл бұрын

I've seen both ways in terms of marking the shaft position and I think Billy marked it to be at 12 O'clock but you want the spine at the target. Obv 3 O'clock changes if you're a lefty. I have marked them in the past like Billy but I know that mark leaves the spine at the target. Some people get deep, deep on this and go at angles or away from target etc I'll be honest I'm not one of those characters

@anthonygiuliano6574 Жыл бұрын

Hey trottie is there a p790 coming out this year ? Before I buy the current set

@trottiegolf Жыл бұрын

Do you know what.... I have no clue. They deliberately keep me out of the rooms with that type of info these days 🤣

@ddde48 Жыл бұрын

What lie angle do you play on your irons?

@trottiegolf Жыл бұрын

6i @ 61 - move both ways off that

@MM-tn3br Жыл бұрын

Rumor has it that Billy quit after Trottie's visit.

@trottiegolf Жыл бұрын

🤣😂 I can confirm Billy did not quit

@mitchy7051 Жыл бұрын

what fish wire type/thickness does he use ? thanks

@trottiegolf Жыл бұрын

I have no clue.... I'll find out though

@mitchy7051 Жыл бұрын

Hi Trottie - do you typically SW it a little lighter so that it accounts for the epoxy? as in if you wanted D2, you SW at D1.5 add epoxy?

@davidlambert4823 Жыл бұрын

In his previous builds he says he does. Look at the Rory wedge build and he mentions it.

@trottiegolf Жыл бұрын

As our guy says I like to but that's just me, defo on wedges I keep a very close eye on that

@MarineBand5524 Жыл бұрын

Am I guessing correctly that the KBS shafts that came with my TM not done like KBS would have done?

@trottiegolf Жыл бұрын

They will have been assembled by TM

@MarineBand5524 Жыл бұрын

@@trottiegolf yes but they don’t do the wobble testing for straight back and forward like they do?

@MarineBand5524 Жыл бұрын

I love what I’ve got and fully trust TM from the videos I’ve seen of people here showing quality control. And my irons still feel great. Would it be possible to send them in and have TM redo the faces when they get worn down enough? Or I’ve heard that using mats has a higher probability of needing them checked for angles?

@trottiegolf Жыл бұрын

@@MarineBand5524 Mats and lie angles is 100% a thing, so check them frequently. Redoing the grooves, that's a myth, TM won't do that. In terms of frequency matching, you'd need to send your clubs to KBS for them to retro build the irons again. Might be something you wanna consider.

@MarineBand5524 Жыл бұрын

@@trottiegolf thank you! I will do that!

@roidAholic Жыл бұрын

whats trotties handicap? how often do you play man? love the videos

@trottiegolf Жыл бұрын

Play maybe once a week / 10 days all depends on schedule, fluctuate between scr and +3 all depending on my flow. I'll be honest still wrapping my head around this GHIN system as was a pro for quite sometime so not really sure still how it can move so much. Old money UK hcp prolly a +1 ish but like everyone can still get hot (or cold) occasionally 🤣

@carllicari3067 Жыл бұрын

@@trottiegolf ...or so little at times. It's a real head scratcher!

@trottiegolf Жыл бұрын

@@carllicari3067 Greatest game i've ever known 😎

@raymondkuk5409 Жыл бұрын

Hardest hard is the get the length right….everyone measure 37” different for instance.

@Danjon1235 Жыл бұрын

is it just me or did he mess the griptape up? Didnt look smooth. :/

@joseenriques5791 Жыл бұрын

I will be 100% honest here and my intention is NEVER to talk about a great company like TAYLORMADE! I've been playing golf for 30 years, and sponsored by Taylormade since 2008. The company is AMAZING, however trottie, I am like you and honestly, Taylormade when you order a set of custom clubs, when you received them, they are not what you order. Last time, I order my set of irons swing weight D2 and I received them swing weight D7 and D8!! YES that big of a difference. The specs 1* flat and they came 1* Upright. Most of the times, happened this situation with Taylormade and is a real PAIN. I am currently playing Mizuno and my experience has been AMAZING in quality control if I can call it that way. May be too busy? Anyways this doesn't mean I don't LOVE Taylormade and this doesn't mean that the quality is AMAZING I am just trying to point out this to you since as far as I see the video, I am like you!

@jayburbs15 14 күн бұрын

SST Pure..... smh

@raphael6507 Жыл бұрын

"Promosm"

@imnotelvis11 Жыл бұрын

the volume gain limiter on the audio is WAY TOO INTENSE. it was so disorienting having the audio fully cut every few seconds in between words or people speaking.

@imnotelvis11 Жыл бұрын

i get the use of it, just up the attack/release times ffs.

@Cohen177 Жыл бұрын

It does not speak for KBS that they need to spine align their own shafts, which basically means they are not perfectly round.

@GregSmith-cw8xu Жыл бұрын

Each shaft starts as a flat piece of material, wrapped into a round object. So this means there will always be a crossover point where the ends meet. This is the spine.

@thisisjoelrobinson Жыл бұрын

No steel shaft is perfectly round