Troubleshooting a Powermax 0-30 fault code

Рет қаралды 27,999

Күн бұрын

For metal workers who need to easily and reliably gouge and cut metal up to 38 mm (1-1/2″), Powermax® is a line of seven portable, professional-grade plasma systems that are designed for maximum productivity. Unlike other metal removal methods or competitive plasma brands, industry-leading Powermax systems allow customers to tackle any job by offering the most extensive manual and automated metal cutting and gouging capabilities.
This short video will help you to identify the symptoms of an 0-30 error for the Powermax® product line, where to locate the fault code on the machine, and some possible solutions.
0:00 - Introduction
0:46 - 0-30 Fault Code Symptoms
1:19 - Different 0-30 Faults
1:42 - Low-amperage machine fault display (30 AIR, 30 XP, 45 XP)
2:02 - High-amperage machine fault display (65, 85, 105, 125)
2:38 - Resolving Fault - Consumable inspection and replacement
3:07 - Resolving Fault - Torch or power supply damage
3:25 - Continuing 0-30-1 fault - Perform a gas test
4:43 - Conclusion
For more information, visit: www.hypertherm.com
For more training, visit: www.hypertherm.com/HCI
You may also be interested in these other related videos.
Powermax Low Gas Pressure Faults for Powermax plasma systems under 50 amps
• Powermax Low Gas Press...
Troubleshooting Powermax Low Gas Pressure Faults for Systems over 50A
• Troubleshooting Powerm...
Troubleshooting Powermax 0-51 Fault: Start Signal at Power Up
• Troubleshooting Powerm...
Troubleshooting Powermax Torch Cap Faults 0-50 Fault
• Troubleshooting Powerm...
Powermax Preventive Maintenance
• Powermax Preventive Ma...

Пікірлер: 10

@pmd7914 3 жыл бұрын

Fellow Powermax45 XP users, be aware you may not get a numeric fault code if using hand held torch. If fault develops look at pages 150 of operator manual for flashing lights code meanings. If using with cnc computer screen may display the fault code.

@upendergupta5302 3 жыл бұрын

Please sir help me my machine torch is moving down in running time it touch in material sheet and stop machine plasma collision alarm

@samisiddique5000 6 ай бұрын

Sir I have powermax105 sometime 0-30 error but two to three time on off its reset I already send to service but same problem until now we change new torch but problem still same any idea why

@francescobalbisboggiano7775 3 жыл бұрын

I have a problem on hypertherm 125: the electrode hops and the air comes out intermittently. result when I start the arc it burns the electrode spring immediately. how should i solve? do i need a more powerful compressor? the flashlight is new

@hypertherm 3 жыл бұрын

Hi Fancesco, Thanks for reaching out with your comment. Can you verify that your compressor that is rated for 9.2 CFM at 90 PSI.?