How to Replace Engine Water Pump 2007-2013 Mini Cooper

Рет қаралды 48,000

2 жыл бұрын

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00212
This video shows you how to install an engine water pump on your 2007-2013 Mini Cooper. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2007 Mini Cooper
2008 Mini Cooper
2009 Mini Cooper
2010 Mini Cooper
2011 Mini Cooper
2012 Mini Cooper
2013 Mini Cooper
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oI/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench 1aau.to/of/1AXAA00010
• 10mm Socket 1aau.to/oz/1AXAA00017
• 17mm Socket 1aau.to/oA/1AXAA00015
• Hose Clamp Pliers 1aau.to/ob/1AXAA00076
• T30 Socket
• Ratchet 1aau.to/oL/1AXAA00016
• Torque Wrench 1aau.to/ow/1AXAA00044
• Drain Pan 1aau.to/oe/1AXAA00320
• Razor Blade / Gasket Scraper 1aau.to/oe/1AXAA00280
Subscribe: / @trq
Check out our playlist:
Mini Cooper 2007-2013 2nd Generation: • Mini Cooper 2007-2013 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 29

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@sbmallik2 Жыл бұрын

The best video so far about replacing the water pump! Removal of the water pump pulley followed by the tensioner pulley allowed a better access to the pump. Other videos either demonstrated struggle to maneuver the pump or dismantled half the car to do the job. 👍

@jameszumbrock1650 5 ай бұрын

Doing a 2010 right now, everything he says is pretty accurate with the exception of the top bolt on the water pump. Nearly impossible to get at. I've been working on it for over an hour and I'm ready to punch something

@blueyfi Жыл бұрын

Thanks mate, Just about to do the one on my wife's car. Haven't done a Mini water pump as yet, so thanks for the video. Cheers Bluey

@MDALAM-nh2sh 7 ай бұрын

very straight forward technique. Other guys make it extremely complicated. Hats off

@charlesb.3116 Жыл бұрын

This can't be a 2008 cooper. The 2008 has even less space to remove things. Don't get me started on the water pipe. If I ever meet the engineer who designed this car there is going to be a misunderstanding!

@charlesb.3116 Жыл бұрын

Great video though guys. This did help a lot!

@ToeNailBreaker 7 ай бұрын

Took me 8 hours to get this done on our 2012 Mini Cooper S Countryman. I would like to know what special tool? That darn tentioner took the longest to get those bolts out. After doing this job I can only think of a 10mm flex rachet wrench, S-Shape Rachet wrench, Offset wrench, or halfmoon rachet wrench to make things go smoother and reduce time. This was my first time changing a water, so the video was a mig help and guid to know what to expect.

@clozedcaskets1438 10 ай бұрын

Thanks for the video, about to do one now, im a diesel mechanic so had to watch a video on this little guy. This doesn’t look fun 😂 lmao

@rockyacrbusa 2 ай бұрын

I put a jacl under the engine and took the motor mounts off and worked from above. It was easier and the top bolts were easier to get at. Buy some shorty sockets and the wrench also. Got a torque wrench on the pump bolts at 9 nm.

@Hugs_4_Bugs_ Жыл бұрын

Oh awesome, I totally thought I would have to remove my thermostat housing AGAIN! I just replaced my thermostat last month and lo and behold, my water pump goes out! Byebye A/C byebye coolant circulation byebye engine fan lmao... Fortunately, this is a 20 minute video on the job. This looks very doable and I don't have to clear half the engine bay to reach it.

@mindtwister6249 2 ай бұрын

I’m assuming mine has went bad but I don’t know, probably gonna look at it today and if so then follow this video

@CityOfSpears Жыл бұрын

What is the special tool used to get in those tight spaces?

@thomasduan8508 Жыл бұрын

Great video! Very nice camera sets up, good skills, clear instruction. I really like it!

@gokselemre5940 Ай бұрын

İs this same with countryman 2011? Thanks

@LuisFigueroa-ql4xb 11 ай бұрын

Máster of masters 👊🏻👊🏻👏🏻👏🏻👏🏻

@TRQ 11 ай бұрын

+Luis Figueroa Thanks for watching our video! 1aau.to/m/Shop-TRQ

@Leoneidas 9 ай бұрын

What goes out on the pump? Looks like it should still work just fine? Maybe it leaks?

@alexw7766 3 ай бұрын

Hi I’m looking into doing this myself, I’ve been told you need a bmw computer to reset it once you’ve done it it’s a 09 plate 1.4 is This true ?

@user-uv6oq8mz5c 5 ай бұрын

I would replace the hose and serpilentine belt as well.

@PrestigeWorldwide-XXII 5 ай бұрын

U R AWESOME!

@davidlward7998 9 ай бұрын

Why did you install a water pump that was different from the original. In the video the original water pump has a casting hole with a plug that is clearly visible. The water pump you put in doesn't have this and the water pump you put in looks like it has an electrical plug on the side.