Рет қаралды 5,403
Shop for New Auto Parts at 1AAuto.com 1aau.to/c/137/b...
This video shows you how to install a valve cover gasket on your 2010-2014 Subaru Outback. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket will make sure the oil stays inside the engine where it belongs!
Estimated installation time for a professional technician is approximately: 54 minutes
This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obHk/1A...
• 10mm Wrench 1aau.to/oadC/1A...
• 10mm Socket 1aau.to/obIj/1A...
• 12mm Socket 1aau.to/ob9b/1A...
• 14mm Socket 1aau.to/ob9b/1A...
• Trim Tool Set 1aau.to/oaym/1A...
• Needle nose pliers 1aau.to/oI7/1AX...
• Needle nose pliers 1aau.to/oI7/1AX...
• Ratchet 1aau.to/ocaJ/1A...
• Socket Extensions 1aau.to/ob9b/1A...
• Torque Wrench 1aau.to/obcD/1A...
• Block of Wood
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oPx/1AX...
• Gloves 1aau.to/oa8s/1A...
• Safety Glasses
• Floor Jack 1aau.to/oayn/1A...
• Magnet - Extendable
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.