How to Replace Valve Cover 2007-2013 Mini Cooper

No video

How to Replace Valve Cover 2007-2013 Mini Cooper

Рет қаралды 27,829

Күн бұрын

Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ia/1AEV...
This video shows you how to install a new valve cover gasket in your 2007-2013 Mini Cooper. Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket.
This process should be similar on the following vehicles:
2007 Mini Cooper
2008 Mini Cooper
2009 Mini Cooper
2010 Mini Cooper
2011 Mini Cooper
2012 Mini Cooper
2013 Mini Cooper
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pocket Screwdriver
• 10mm Socket 1aau.to/oa/1AXA...
• 8mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• T20 Socket
• T30 Socket
• Ratchet 1aau.to/ob/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXS...
• Gloves 1aau.to/oa/1AXS...
• Paper Towels 1aau.to/oa/1AXS...
• RTV
• Magnet - Extendable
• Pick 1aau.to/oa/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 23

@marklaman2721 17 күн бұрын

Nice work!! Saved me a bunch of cash, man!!! As long as you follow his instructions and have the tools he uses, it’s pretty straightforward. Well done, man!

@yojay1 3 ай бұрын

Super useful thank you! I completed the job in about 45 mins that’s to this video 👍. But the way, the heat shield tubes have a small square cutout in their walls which fits onto a notch in each of the spark holes in the valve cover. Not having the shields seated properly meant I couldn’t seat the cover down on first attempt. Tube seals came fitted onto my valve cover already. I bought the OE cover from Neo Brothers in the UK for around £140.

@youtubeaccount9058 Жыл бұрын

Perfect no-nonsense video!

@michaelruys5021 Жыл бұрын

What about tube seals. My plugs are swimming in oil. Saw you remove a couple but did not see new ones or how to install.

@TyBardy Жыл бұрын

what are the two metal clips thst come with the new cover though?

@adamkelsch4143 Ай бұрын

How many hours does a job like this typically take? The local mini dealer quoted 19 hours labor for "valve seal" leak repair. Typical burning of 2 quarts of oil everything 5k but now starting to spit out smoke during long idle periods.

@mikemartian6217 2 ай бұрын

Nice job bro hey when putting back the coil packs is there a certain position that you got to remember or does it only go back one way

@Jhboy2011 6 ай бұрын

Thank you! This was great!

@sterlingwallstrum8975 Жыл бұрын

Would you recommend replacing the plastic valve cover with an aluminum one? As I understand the plastic warps which causes the leaks frequented in these models.

@michaelruys5021 Жыл бұрын

Great tutorial

@omardanon843 Жыл бұрын

Why not replacing the gasket by it alself ? Is it trequired to replace the whole cover if the gasket is leaking ?

@garycossar3577 Жыл бұрын

Why would you need to do this? Is this due to a rough idle?

@sebastianantoine8020 Жыл бұрын

Exactly the question I need answered for my 2012😭😭

@chiaradunn2367 Жыл бұрын

Need to do what???

@iambacksumon6466 5 ай бұрын

Can the mini cooper country valve be cleaned with water or does it need a new one? Please let me know in the comments

@ingaderas Жыл бұрын

Thanks for sharing!

@estebanvaldovinos9996 10 ай бұрын

My mini gives me a code for #1, #2 cyl misfire. I did see a spark plug wet with oil. I did all spark plug and coil replacement but code still remains. Do you think it helps if I replace the valve cover gasket to avoid oil sipping into the spark plugs? Will that help get rid of the misfire codes?