Buy Now!
New Door Lock Actuator from 1AAuto.com 1aau.to/ia/1ADLA00270
This video shows you how to replace the lock actuator so that you don’t need to purchase an entire latch assembly in your Chevrolet Silverado 1500 1999-2006. Power door lock systems typically use some sort of actuated motor to drive the lock mechanism. If the actuator breaks, then the door lock will no longer operate electronically.
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Pocket Screwdriver
• 7mm Socket 1aau.to/obfZ/1AXAA00017
• Trim Tool Set 1aau.to/oae7/1AXXX00006
• Needle nose pliers 1aau.to/oEs/1AXAA00051
• Needle nose pliers 1aau.to/oEs/1AXAA00052
• T30 Driver 1aau.to/oEp/1AXAA00008
• 3/8 Inch Drive Ratchet 1aau.to/obAy/1AXAA00015
• Socket Extensions 1aau.to/obAy/1AXAA00015
• Duct Tape
• Gloves 1aau.to/oage/1AXSS00048
• Safety Glasses 1aau.to/o9a/1AXAA00343
• Pick 1aau.to/oRg/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.