Рет қаралды 3,446
Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1AST...
Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections. This video shows you how to install new TRQ outer tie rods on your 2001-2007 Toyota Highlander.
This process should be similar on the following vehicles:
2001 Toyota Highlander
2002 Toyota Highlander
2003 Toyota Highlander
2004 Toyota Highlander
2005 Toyota Highlander
2006 Toyota Highlander
2007 Toyota Highlander
Tools you will need:
• 19mm Wrench 1aau.to/oc/1AXA...
• 1/2 Inch Impact Socket Set 1aau.to/oa/1AXA...
• 1/2 Inch Impact Socket Set 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/od/1AXA...
• 19mm Socket 1aau.to/of/1AXA...
• 21mm Socket 1aau.to/of/1AXA...
• Locking Pliers 1aau.to/od/1AXA...
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Socket Driver
• Torque Wrench 1aau.to/oe/1AXA...
• Copper Anti-Seize
• Gloves 1aau.to/oa/1AXS...
• Safety Glasses 1aau.to/oa/1AXA...
• Hammer 1aau.to/od/1AXA...
• Rubber Mallet 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
2000-2007 Toyota Highlander 1st Generation: • 2001-2007 Toyota Highl...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.