Рет қаралды 2,425
Buy Now!
New Vehicle Speed Sensor from 1AAuto.com 1aau.to/ia/1ATRS00417
This video shows you how to install a new rear wheel speed sensor on your 2010-2014 Subaru Outback. Wheel speed sensors send data to the ABS system, which uses it to determine if the vehicle is sliding, or skidding. A sensor that is not working correctly will usually trigger an ABS dash light.
This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback
Tools you will need:
• 10mm Socket 1aau.to/obFA/1AXAA00017
• Ratchet 1aau.to/ob7A/1AXAA00016
• Socket Extensions 1aau.to/ob5U/1AXAA00015
• Torque Wrench 1aau.to/obaa/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oNt/1AXSS00035
• Gloves 1aau.to/oa28/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oawr/1AXAA00068
• Jack Stands 1aau.to/oais/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.