Рет қаралды 29,243
Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AACV00524
This video shows you how to install a right front CV axle shaft on your 2004-2010 BMW X3. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 18mm Wrench
• 16mm Socket 1aau.to/oa/1AXAA00015
• 17mm Socket 1aau.to/oa/1AXAA00015
• 36mm 12-point socket
• 8mm Socket 1aau.to/oa/1AXAA00017
• Pliers
• Push Pin Pliers
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Paper Towels 1aau.to/oa/1AXSS00035
• 5mm Hex Socket
• Center Punch 1aau.to/oa/1AXAA00055
• Chisel 1aau.to/oa/1AXAA00055
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Ratchet Strap
• Rubber Mallet 1aau.to/oa/1AXAA00413
Subscribe: kzfaq.info/love/WCdsftsTqYMO7cA_5Sc-yA
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.