No video
How to Replace Radiator 2015-2019 Hyundai Sonata
Рет қаралды 12,983
Күн бұрынBuy Now!
New Radiator from 1AAuto.com 1aau.to/ic/1ARA...
This video shows you how to install a radiator on your 2015-2019 Hyundai Sonata. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.
This process should be similar on the following vehicles:
2015 Hyundai Sonata
2016 Hyundai Sonata
2017 Hyundai Sonata
2018 Hyundai Sonata
2019 Hyundai Sonata
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa5U/1A...
• Phillips Head Screwdriver 1aau.to/oa5U/1A...
• 10mm Socket 1aau.to/oaQq/1A...
• Trim Tool Set 1aau.to/oXj/1AX...
• Needle nose pliers 1aau.to/oyE/1AX...
• Needle nose pliers 1aau.to/oyE/1AX...
• Ratchet 1aau.to/obiJ/1A...
• Socket Extensions 1aau.to/oa7U/1A...
• Swivel
• Gloves 1aau.to/oDk/1AX...
• Safety Glasses 1aau.to/ow2/1AX...
• Drain Pan 1aau.to/ot2/1AX...
• Razor Blade / Gasket Scraper 1aau.to/ohn/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
@TRQ Жыл бұрын
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@tonyr2365 8 ай бұрын
Great video - successfully replaced my radiator in 2016 Sonata base model in ~4 hours. A few notes for others: I did not vaccum out my AC lines, but was very careful to not bend/flex AC lines excessively and did not run into any issues - use your judgement. Also, when putting things back together, I found it easier to leave the radiator unbolted while installing the fan and the plastic piece with 4 bolts that mounts above (video forgot to include the re-installation of this part, had to disassemble after realizing). Also, I had trouble fitting the fan back in, so I unscrewed the aluminum block fan controller and tucked it out of the way to more easily slide fan down. Thanks again, guys - very helpful! $120 + 4hrs vs $1000 the mechanic wanted!
@TheManu909 Жыл бұрын
This video was awesome, rock the size of a softball went through my front bumper puncturing condenser and radiator. Was looking at over $1000 in parts and labor and did everything myself for less than $200.
@dstone2274 6 ай бұрын
One of the best KZfaq mechanic videos
@Olezhamen Ай бұрын
You have been a great help
@sliccpulla601 4 ай бұрын
Do we have to put that elbow connector back on the lower radiator or can we run the hose directly to the radiator..??
@sterlinghardy8956 5 ай бұрын
How did you get the lower connector off
@saavyone Жыл бұрын
Very well done! Super helpful thank you
@user-uj9rv7jb7w 11 ай бұрын
I don’t understand what bolts were unscrewed at 8:05 and what clips were undone at 8:44. Currently taking out my radiator for 2017 Hyundai sonata hybrid limited
@user-fx2mz3hr8m 7 ай бұрын
Where is your business located and how much a job like this cost?
@user-uj9rv7jb7w 11 ай бұрын
P.s. I’m stuck trying to figure out how to separate fan from radiator to avoid disconnecting A/C / Freon pipes
@yummylaos 7 ай бұрын
Is this the same as Elantra no videos on radiator
@TRQ 7 ай бұрын
+@yummylaos We do have a how-to video for your vehicle that you're looking for: kzfaq.info/get/bejne/qN9idaSC0JyrgIE.html