Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ic/1ASBJ00024
This video shows you how to install a lower ball joint on your 2002-2005 Ford Explorer. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/ob/1AXAA00020
• 18mm Socket 1aau.to/ob/1AXAA00043
• 19mm Socket 1aau.to/ob/1AXAA00043
• 21mm Socket 1aau.to/ob/1AXAA00043
• 24mm Socket
• 30mm Socket
• Ball Joint Press
• Pickle Fork
• Trim Tool Set 1aau.to/oa/1AXXX00004
• Side Cutters
• Snap Ring Pliers
• 3/8 Inch Air Impact Gun
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Bungee Cord
• Liquid Thread Locker
• Center Punch 1aau.to/oa/1AXAA00055
• Hammer 1aau.to/oa/1AXAA00091
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.