Tru Bolt Electronic Door Lock Install and Setup

No video

Tru Bolt Electronic Door Lock Install and Setup

Рет қаралды 60,503

Күн бұрын

How to install and set up a Tru Bolt electronic keypad door lock. Other brands are similar in installation and programming.

Пікірлер: 47

@the_ejsme4446 10 күн бұрын

You can tell that this man is old-school when he's got electrical tape as a bandage on his thumb. Probably got the cut held together with super glue and sanitized by pouring whiskey on it. Great video too! Helped me install and program mine!

@LunaLupin12 Жыл бұрын

This video was so incredibly helpful! My mother and I spent over an hour trying to install our new unit with the very limited, confusing instructions they included. This video helped me actually get it installed. Thank you so much!!!

@JL-il6vk 2 жыл бұрын

Great Video! You remind me of my dad who recently passed. He was very good at giving me instructions and never yelled! Miss you dad! Thank you Roger for your wonderful instructions!

@1gmhope 2 жыл бұрын

Thank you for making this video - even with angle issue it's very helpful - they never answer their phone & don't call back (after requesting your name & number) - you have the only video with this model & I sure do appreciate your time /effort

@TB-et9wp 2 жыл бұрын

Great video. Can't wait to install mine. Thank you!

@sherrynoss7135 2 жыл бұрын

Great job. Even with bad camera angle, I was able to install mine with your help. The instructions that came with were confusing. Thanks.

@groffus11 2 жыл бұрын

Thank you or the video it was a great help even with the bad camera. Your explaination was great, the instructions were very confusing, it only took me 15 mins to do it on my door.

@MOKAY Жыл бұрын

Thank you for sharing This was exactly what I needed to learn how to replace my batteries.

@blgillespie1 2 жыл бұрын

Thanks for the installation video! I installed mine last night and this video make my installation super smooth!

@georgereasr9080 Жыл бұрын

The whole installation was a picture of rogers back! The programming part was great

@demiurgeimago9343 2 жыл бұрын

Would help if the camera was actually pointing at the doorknob…

@mssatire14 2 жыл бұрын

Great video if we could see what you're doing. I'm glad you're explaining and did this video but upset at the angle of seeing nothing

@jacobo9611 2 жыл бұрын

Question for my left handed hinged door in the back, the locked switch is facing vertical, my right hinged door in front has the lock switch horizontal, is their a way to make the locked switch to be horizontal for the back door?

@shavondaconway3518 2 жыл бұрын

Awesome I got it installed and it connected but then my dead bolt won’t automatically turn :( it just spins HELP

@rogersshop 2 жыл бұрын

Check your alignment with the strike plate. Sounds like you are not aligned right.

@lamontfoxhoven9673 3 жыл бұрын

I have a quick question the lock button on the inside, is that remain on the unlocked position.

@rogersshop 3 жыл бұрын

This made me go look! The lock button does turn when using the keypad to lock or unlock

@demetrousnobles552 Жыл бұрын

I couldn't see what was being done. The camera was not on the work.

@JenMulholland-kc2jt 18 күн бұрын

Would’ve been really nice if you could’ve actually seen what he was doing

@richardwhite2292 3 жыл бұрын

I can't see you installing due to your camera is pointing at the floor.

@rogersshop 3 жыл бұрын

Aware of that and is noted in the video. One of the down-sides of shooting on your own, without help. However, the install is pretty straight forward. The programming is where many have a problem.

@karenhoffman7929 3 жыл бұрын

h Have you ever had one that will not lock? Neither with the finger lock (won't turn), or the electronic lock button (hear it trying to work)?

@rogersshop 3 жыл бұрын

No. I've done a total of seven of these with no problems.

@jordanseger 3 жыл бұрын

Common issue with locks installed in properly. Just got mine installed and the 258 doesn’t work at all

@1gmhope 2 жыл бұрын

Mine won't lock either - I'm thinking the latch cylinder might be turned the wrong way - I noticed on his that the rounded side points to the outside side of his door with the straight side pointing inside - I'm taking mine apart to change it now

@1gmhope 2 жыл бұрын

Well I tried installing it with the cylinder facing the way it is on his & everything works except with the cylinder half moon facing outside of the door it opens right up even when locked - also with cylinder in this position it would be easy to insert a butterknife to open - I don't know what to do to fix this as it's inability to lock makes it worthless

@gabinorenteria3695 2 жыл бұрын

Well explained but didn't see what I needed to see. Can you redo the video?

@Bruceyoung100 3 жыл бұрын

I can't see how your putting those screws in

@shavondaconway3518 2 жыл бұрын

Omg the only part i need and the camera is to low and I can’t see 😭😭

@wsaba2850 2 ай бұрын

You can't see what your doing. The camera is to low.

@joannestevens7621 9 ай бұрын

Can't see door ,just the bottom half too bad

@MODDINGDASH3R 3 жыл бұрын

What stops a thief from simply looking up this video or manual and then reprogramming someone’s lock to break and enter? Seems like a huge flaw. Guess the chances are very low but still.

@rogersshop 3 жыл бұрын

Change the programming code from the factory 123456 to something else, which is what I always do. Another mistake I see people do is use their address for the entry code...........Not a good idea!

@xchen8980 2 жыл бұрын

@@rogersshop hi please answer if I already programmed it how do I re-do the admin passcode

@rogersshop 2 жыл бұрын

@@xchen8980 Unless it was changed, the default factory passcode is 123456 for admin access.

@anneshirley9560 2 жыл бұрын

Thanks for asking this question! I was wondering that myself.

@rick0757 3 жыл бұрын

Couldn’t even see what you were doing

@rogersshop 3 жыл бұрын

Yes, I am aware that the camera was not exactly on point. One drawback of one-person videos.

@paulamurdaugh3948 3 жыл бұрын

wish I could see what you are doing

@rogersshop 3 жыл бұрын

Yes, I am aware of the bad camera angle. I intend to do another one on just the programming and it will be close up and detailed.

@dmtravis2712 2 жыл бұрын

blah, blah, blah...just get to the details of installing and programming the keyless entry lock. The video of this project is horrible. All you see is the bottom half of the door and the guy's body. I can't even watch it.