TRUE Bridge Mode? Your ISP keeps this a secret. (Gateway Router Setup)

No video

TRUE Bridge Mode? Your ISP keeps this a secret. (Gateway Router Setup)

Рет қаралды 346,930

Күн бұрын

True bridge mode, the best bridge mode router setup on your ISP gateway modem router. Here's how I did it...There are several ways to set up "Bridge Mode" on your ISP gateway - but very few people know this method... This Bridge Mode essentially turns your ISP internet router gateway into an enterprise-like modem
the context of this video is for educational purposes and how changing certain settings on your internet provider gateway can help you use your own router with less issues!

Пікірлер: 343

@ShovikMdAnjum 5 жыл бұрын

You should open an ISP and serve the whole world with true honest fiber broadband.

@JohnGlasscock 5 жыл бұрын

Billionaire goals

@unknownwolf4046 4 жыл бұрын

Be perfect for those live in Rural or Farm Areas cause my isp Bravado Wireless is ok but my xbox shows 5mbps download june 8 2020 I recently got a TPLINK archer AX1500 Router hooked up to my main LTE modem bec 6300nel Ridgewave R15 it wifi gotten worse over time

@leqendslab1124 3 жыл бұрын

Does this allow you to change your Ips incase of a ddos attack i recently switched from spectrum to ATT and spectrum allowed me to change my ip with problem

@FrenzyBoi 3 жыл бұрын

"Glasscock Network"

@ShovikMdAnjum 3 жыл бұрын

@@FrenzyBoi I can't believe my comment got 90+ likes.Why I have not been notified??

@JohnGlasscock 5 жыл бұрын

There are many "bridge mode" router setups that i've tested and this is by far the best and closest you can get to true bridge mode. Unfortunately, it is not free. But, it turns your ISP gateway into an enterprise modem capable of assigning more than just one public IP - which is awesome. I'm very happy with this setup. (edit) P.S. This video did not hit sub boxes

@ReaperHackz 5 жыл бұрын

i got it weird but great video :)

@djaran13 5 жыл бұрын

glorious

@JohnGlasscock 5 жыл бұрын

@@barneyfife7208 where's your video then?

@artrodriguez590 5 жыл бұрын

What do you mean when you say that the video does not "hit sub boxes"? Thanks.

@JADC93 5 жыл бұрын

Hey jhon and viewers. I have a question, my internet is 400mpbs download and 40upload, but on my PS4 pro it sets to 50mpbs download and 4.5 upload... How can I fix this?

@carlosmontana5219 Жыл бұрын

I work for an ISP like that and I love that, cause i feel confident about it, i love tech support and IP work even though I learned it how i went other ITs and Engineers and L2 and L3s a lot of them dont want to learn something new

@benjaminc.m.9873 3 жыл бұрын

Question is, does this method provide an IPv6 connection? Does IPv6 tunnel through the IPv4 static IP from ATT?

@bloom6372 5 жыл бұрын

I call verizon, And I end up teaching them how to internet......

@gilbee14 5 жыл бұрын

i called ATT and got hung up on when i told her to get level 2 or level 3 support after she tried to tell me i needed a technician, and she knew what she was doing.

@malrofo 5 жыл бұрын

Tech support in most companies has no idea wtf they're talking about. Most are either in India or are a recent graduate that knows boolean algebra but can't reset their own modem

@justforviews3802 3 жыл бұрын

Something here in Canada with Bell Canada. I'm sure we're talking to people in the Philippines and not in Canada (not disrespecting other countries just stating that if we spoke to someone in our own country instead of call centering all the way down there)

@asil10110 2 ай бұрын

No, you do not. Most companies hire unxerpert persons for jobs like support. I also called ISP support to asking for a open port used by his voIP service in a way i was abble to add to my firewall configuration and they have not idea what i was talking about.

@SiontheRapadant 2 жыл бұрын

Can you give some info real quick on how to go about talking to the ISP and getting this all actually done? Because this would be really useful to me

@sonyalee3434 4 жыл бұрын

I have some questions about this type of thing an have been unable to get or find answers. Wish there was a way to send emails with questions for this guy. I've watched so many of his videos that my mind is over filled at the moment. Lol Thanks for Sharing

@JohnGlasscock 4 жыл бұрын

My business email is on my channel description and is only available on desktop view to cutdown on spam. You can send questions there if you have any

@recoildisruptor3217 5 жыл бұрын

Thank you so much for this video. I will be using it a lot this week as a guide (just scheduled an install date for Gigapower thru AT&T on Thursday). I will attempt to use this setup -- please wish me luck! 😄

@JohnGlasscock 5 жыл бұрын

Welcome to the bittersweet world of fiber. Good luck!

@recoildisruptor3217 5 жыл бұрын

John Glasscock Thank you.

@benjaminc.m.9873 4 жыл бұрын

As long as the "IP Passthrough" function that is available on some of the ATT Gateways shows successful trace routing over IPv4 and IPv6, wouldn't that method be sufficient? I know the "DMZ" mode on your model doesn't actually allow IPv6 passthrough, just want to know if the "IP Passthrough" function works better than "DMZ"...thanks

@tjhuntog 3 жыл бұрын

Yes most efficient. That’s what I use, ip pass through and disable all filters and security options on att gateway disabled

@pocketknifeMT 4 жыл бұрын

Most ISPs will not lease you a static IP anymore unless you have a business account (we kinda ran out of IPv4 addresses a long time ago), FYI for anyone out there looking to do this. I only have a static at home because I got it 15ish years ago.

@TrayDays113 5 жыл бұрын

Good to see you got it working perfectly. As I know this was a bit of a hassle for you previously.

@JohnGlasscock 5 жыл бұрын

yeah that's because all the other options are not good, too many issues

@26payam 2 жыл бұрын

Can you do a new with you because AT&T website exchange appreciate it thanks

@SobeHall 4 жыл бұрын

This is cool, I think since you’re having success with your setup it would be cool to see how you have your Pace configured as far as all of the settings are concerned internally. Not just specially the “modem only” mode. I have issues with ATT dropping my signal completely at times, I have a Nighthawk AX12 sitting behind my Pace 5286 and the WiFi improvement is 1000% better but my fiber 1Gb connection is still wonky at times even though any time I do a true Speedtest from the modem I’m getting around 980-995Mbps at all times ...

@BenDover-yt3fs 3 жыл бұрын

Will I get charged more if I do this though? I’ve never seen anyone complain that they get charged more on their bill so I assume they don’t?

@ahwang95 5 жыл бұрын

I purchased a block of static IP addresses through ATT and I don't have that option on my router settings for public routed network.

@jeffm4284 3 жыл бұрын

I haven't done this (I may in the future), so you'll need to read the Help text off to the right side: 1) Look under "Home Network", "Subnets & DHCP", 1/2 way down, "Public Subnet". 2) Then also check "Firewall", IP Passthrough", 1st option "Allocation Mode"=Off. Change it to "Passthrough". Change other settings on the page as required. 3) Under "Firewall", check "Public Subnet Hosts". This will not display options until "Public Subnet" is turned ON, so I can't tell what this will do. This is all more complicated than in this video, but looks a lot more robust - more feature rich. Good luck. If you get it working, please document for the rest of us.

@meropolis 4 ай бұрын

Wtf??😂 I usually follow you for playstation 5 information, but I found you here as well lol very cool 😎

@brian95240 2 жыл бұрын

I was enjoying wifi 6 via my Nighthawk router AX50 and all devices were flying too. Then, a couple of weeks later, nobody was able to connect to it anymore. A Cox representative bragged about something called "Beacon"; built into the newer Panoramic wifi modem/router. She said it eventually detects your 3rd party router and blocks it on your network. Is there a way to disable something like that; so we are able to still use gigablast internet? Even when I had their 300 mbps service, my router surpassed 300mbps on speed tests. Now. I am hitting 800+ out of 1000mbps (I'm not complaining about that speed. But I miss using the MU MIMO protocol for our household's barrage of devices.

@Ryuga117 3 ай бұрын

damn thats fucked up, fuck cox

@bobithpopit3193 4 жыл бұрын

If I'm still using a wired connection for my pc, would I still plug that directly into the gateway?

@KinoStudentX 4 жыл бұрын

I have a catch 22. My parents have att 2 in 1 router combo and we still do bridge. Except they live in the stone age and feel like like 5mb/s is fine for a household.

@keepthetrash 4 жыл бұрын

This is all super helpful! Would all of these this to be done if I bought my own standalone modem without the router combined?

@Elias-uf8dd 15 күн бұрын

help!! if i add a router to my modem/router combo will that effect my ping and latency and how to make my modem/router works only as a modem ?

@edwardmacnab354 Жыл бұрын

these type of topics are usually way more involved and complex than these you tube guys let on because they never do know all facets of what they are talking about so never go by what ONE of them says.

@techstuff3120 5 жыл бұрын

John, do you think there are hidden settings that get activated/turned off on the att backend when you get a static ip vs the dynamic one? From what I see, the static is very similar to the dmz+ mode, but I’ve tried that and some devices go through and others like my tv and ring alarm do not, I finally set it up as just two separate network ranges and limited the att router to 1 address range and seems to be working for me, but was just curious if everything that wasn’t working for you on the dmz method is working for you on this way of doing it? Just debating to opt for the 15$ to find out it still works flaky, no guarantee, just looking for your experience with both methods. I’ve watched your other videos so I take it this way is actually working for you...

@baremetaltechtv 3 жыл бұрын

Many providers don't support pulling multiple ups from a wan bridge like this, you're actually pretty lucky if yours does. My isp will only lease one ip per customer, period, without a business account

@PhatHeadBullys 4 жыл бұрын

Has there been an update on att configuration/settings because I don’t see the same things that you describe in your video. I have a BSW210.

@afi3702 5 жыл бұрын

Appreciate the knowledge, i got my Static ip block but can i use that static ip i paid for 2 weeks from now when i get my xr700 even tho Frontier is comin tomor to install my internet...?

@kanoooo1111 4 жыл бұрын

Can a paid static ip be assigned to ps4 pro to forward ports . If so do a video on it. Thanks

@timcarter5982 4 жыл бұрын

Do I need one for the router or one for each device connected to it? Also what do I ask my ISP for?

@diloo7524 2 ай бұрын

My isp told me that if they activate bridge mode then I can only connect my lan to pc or laptop ? But my question is why can’t I connect to my phone? Is it something related to the port ? Please sir I need your help♥️

@KasproGe 4 жыл бұрын

Hello I know this's a bit old video, but I have a question, why don't you just disable DHCP on the Gateway and assign a static Wan IP on the 2nd Router?! Won't that work?

@GameAPBT Жыл бұрын

nice explanation John

@jbprojects3 4 жыл бұрын

Used this when I first installed eero with AT&T Fiber. Wondering if this is the same if I move to Google Fiber? Thanks much.

@ivannunez8795 4 жыл бұрын

Good evening John! Will this work with my att BGW210? I recently purchased the nighthawk xr500, I would like to set it up. I have att fiber 1000mbps and I would like to utilize it how is suppose to.

@lobotomizedjellyfish2171 3 жыл бұрын

With this method does it bypass the DNS servers that the 5268 forces on you so you can specify your own Primary and Secondary DNS servers? AT&T should give out free static IP's for that reason alone. They have seriously crippled their gateway router with all the crap they have locked down and the stupid crazy featureless firewall.

@jeremiahjohnson5205 2 жыл бұрын

My ISP basically did the same thing with me when i asked. But I believe I'm only getting a single IP for $10/month. I didn't realize why they were charging me til i watched this video. I have to be careful with mine though, if I plug in a new router or device directly, I have to clone the MAC address that I was just using on old router otherwise I can lose my connection or lease and end up having to call tech support (not 24 hour) to fix it. Really annoying.

@drakedrizzy9413 2 жыл бұрын

Hey John I don’t understand when I put public network and I hit save thinking it’ll send the static ip straight to my xr500 it didn’t work it sent it straight to my computer I don’t understand why is it sending the static ip to my computer but not to my nighthawk

@Is_That_Soma 3 жыл бұрын

So the business below my apartment allows me to use their internet. So they have a modem/router in the basement which is wired to a router on the 1st floor. I have a wifi extender in my living room to boost the signal. Would it be ideal to have them set up bridge mode. I’m getting 60mbps per second one day then the next it was hitting 320mbps. I reset the modem for them and it was working fine but I think I was getting double NAT. Any help would be greatly appreciated. Once the Comcast guy came my mbps dropped to 8 mbps.

@treloarw 4 жыл бұрын

Got a question John. Wanting to know if this will solve my problem. Sounds like it will. Great video and thank you. Quick summary: purchased an asus router that would allow me to connect my vpn service on it. Trouble now is that I have a double nat on Xbox. ISP router doesn’t have bridge mode. I have tried passthrough but that doesn’t fix it either. Aftermarket modems cannot be used with the isp and the isp does not offer any simple modems without router capabilities. So if I call them back and am able to purchase another static ip from them (or five 🙄) should that solve my issue as far as you know?

@zachjohnson8054 2 жыл бұрын

Hi, I would like to know how would I do this with Xfinity? I've tried everything and just want to know the best way of getting to this

@FuroowHD 4 жыл бұрын

my ISP has ZTE F668A modem/router. it only has the option to create a new WAN connection in Bridge mode to use my own router... My ISP does say that their customers can use their own router as main.

@ms7165 2 жыл бұрын

Disclaimer, not real tech proficient! I currently have a BGW210 with Orbi router and 1 satellite. I have an automated home with multiple hubs (Smartthings, Hue, Hubitat etc.) that have assigned fixed IP addresses that I want/must keep as is. The ATT gateway is 5+ years old and they have sent me a replacement 2Wire 5268AC. I really need this changeout to go as smoothly as possible so will this process be the preferred method of changing out the gateway? One more thing; I have a Synology NAS that when attempting to set up Open VPN, the NAS sees 2 routers and won't complete setup. Will this method take care of that issue as well? The VPN is of secondary importance but would be nice if I could get everything up and going during this change out. Any suggestions are appreciated!

@AGeekNamedRoss 2 жыл бұрын

Great video. Thanks for this!

@itzguccii2804 4 жыл бұрын

My router isn’t popping up on the gateway it’s a NETGEAR nighthawk ac2300, connected it via Ethernet cord from the Ethernet cord on the modem router to the new routers internet port. I disabled the WiFi on att router and changed the DHCP and it didn’t pop up on the firewall tab any suggestions

@eddycuevas5130 3 жыл бұрын

John, I guess this is the solution I am looking for, I have a consumer grade modem, I wanna setup my cisco soho router. If I setup bridge mode, would It bypass NAT to my Cisco Router in order I could configure my routing capability? Thank you so much

@mindovergungame-mogg2477 5 жыл бұрын

So is this a better connection than using the Gaming Switch ?

@JohnGlasscock 5 жыл бұрын

If you want to use a third party router, this is probably the best setup. There are pros and cons to both

@ccnp2009 5 жыл бұрын

It’s always best to configure your NAT. You want that public IP on your router. Don’t let the ISPs to configure your internal network settings. G. Can you do a video on the following DNS servers that blocks malware 9.9.9.9, 149.112.112.112 and 149.112.149.149

@baobabcesay2844 4 жыл бұрын

As always, great video... Is there away around AT&T pace gateway....Does anyone offer a seperate router and modem for fiber ?

@quakes1047 2 ай бұрын

Does this work with mesh wifi?

@BriceClary 4 жыл бұрын

Hey got a question with AT&T's fixed wireless internet, your IP is constantly changing which makes your NAT type strict and does not allow you to play online games effectively at all. This is because your internet is being pinged off a cellular tower. Would something like this allow me to keep a static IP address for my gaming PC so that I can have a better experience gaming?

@MrYamaharider1 4 жыл бұрын

I need help. I have CenturyLink fiber internet. I have the C3000Z, and I am trying to set up PPPOE. It's not working I got the login credentials tried doing transparent bridging and tried going straight to the Fiber ONT. Any suggestions? Do I need static IP's to do this?

@loriashcraft7445 4 жыл бұрын

After researching routers to "bridge" with the NVG510, I've got a Motorola AC2600 and have been trying to find a video that will tell me how to connect them and disable the NVG510. I can only get as far as the IP address, which is the same as what you and everyone else says it is, BUT I see a very different interface. After trying to find the same screens and buttons, I give up! Any idea why the interface I am seeing is totally different (and way more complicated) than what you get when going to that IP address? Or any idea where else to look for instructions (please don't say "call ATT!) haha. Thanks in advance for any help!

@livendi3229 4 жыл бұрын

I’m not paying. What’s the second best option ?

@macster1457 4 жыл бұрын

just disable wifi and DHCP on your ISP modem.. that is the same as bridge mode... when you do that, your router will handle all DHCP bypassing your ISP modem.

@Ishh__M 4 жыл бұрын

Hi, I just purchased the block of addresses from AT&T , i got my ASUS router working with one of the addresses. Now my challenge is getting open NAT on both my xboxes. one is hard wired and the other is in a room on 5ghz wifi. i was wondering if it was possible to keep one xbox on the asus routers network and place the wired xbox behind the ATT R/G, and if so whats the proper way to set this up. ( i tried and kept getting a teredo error on the wired xbox). Thanks

@achillesbuilds2432 2 жыл бұрын

I have a very nice Asus router I want to use, but my new ISP only offers a modem/ wifi combo. How can I still use my router with this until I get around to buying my own modem? I've searched around and have found little information on the subject. Also... what modem do you recommend for gaming... that isn't netgear bc I can't stand their customer service. Arris?

@azaansiddique6791 Жыл бұрын

Hey John Thank you for making this video. I cannot find a single video on the internet taking about this kind of bridge setup. however im still confused I actually want my isp gateway (router and modem combo) to act as a modem and then connect a router to it and assign a static public ip to that router. basically all the routing would be carried out by that router. can anyone guide me and tell me what to do

@carlburgin9362 7 ай бұрын

Did you ever get your answer? I'm looking to do something similar

@cjc9719 7 ай бұрын

Exactly right. You are basically replacing the ISP gateway's router function with your own third party router; leaving the gateway to function as a modem only. To do so, you must put the ISP gateway/router into bridge mode. The method outlined in this video is one way to do this. You turn off the WI-FI function on the gateway, eliminating it as a wireless router and making sure it can only be connected to downstream devices through its LAN ethernet ports. Then, connect your 3rd party router into one of the gateway's LAN ports. Make sure that the router is the ONLY DEVICE connected to the gateway (by turning off the gateway's WI-FI and leaving all other LAN ports empty). Thus, the gateway's wireless and wired routing functions are bypassed, having only the single device (the router) to rout to. Then by telling the gateway to assign the public (static) IP's through its DHCP, your router will be the only device assigned a WAN IP which gives the router a direct internet connection and will not conflict with the LAN IP's it, in turn, assigns to all downstream devices. Your 3rd party router is now solely responsible for wireless and wired routing to, from. and among all other devices; after using its own DHCP to assign a LAN IP to each of them (as all other devices are connected to it, the router, NOT the gateway). The router will have it's own firewall and security features so the gateway's firewall should be turned off to avoid conflicts. I hope this helps and didn't just confuse you more. Good luck. It probably is not necessary, however it might be a good idea to set the gateway's DHCP Lease Time to infinite, in order to avoid the future possibility that the gateway might reassign the router's WAN IP to one of the other 5 you are leasing from the ISP. This would depend on the brand of gateway and would of course not be necessary if using the second option he mentioned regarding manually assigning the Router's WAN IP.

@jose117ful 4 жыл бұрын

Can you have the full features of the third party modem? I just bought an XR500 and is super hard for me to get it work properly. I have it now as AP mode which does not allow me to use GEO filter. Please, help! My ISP is Bell.

@Daygomadebrian 4 жыл бұрын

Hey between cox and att? Is att the better route in terms of privacy, etc seems like it.. good video bro

@DavidJimenez-sp3id 3 жыл бұрын

I have the same router with att and just bought a netgear nighthawk r7000. So you’re saying I have to call att and buy something? Please help

@seanmccullen8347 2 жыл бұрын

Could just use your own equipment altogether??? I mean I setup my own modem and router and I never see throttles. I do both LTE and cable and all I do is mess with ip tables. Rural or in town I can get services for $25 or less. In rural spots I get around 150-230mbps

@narrowgate3906 5 жыл бұрын

@John Glasscock so this is only relevant if you have a modem/router combo from the isp? My current setup is modem tp-link tc-7610 (i purchased) netduma R1 with netfear R7000 bridged off netduma. I have spectrum 200 down 10 up. My base ping from ping plotter is 17ms. I'm interested in this buying a block of static ip's. But I'm guessing that it won't help me cause its for bridge mode. Just want to make my connection better for gaming cod blackout if at all possible!

@rigobertoquintero58 5 жыл бұрын

If have the xr500 and att 1000. My speeds are cut in half. Will this process get me closer to those speeds?

@darkosellsoklahoma1189 4 жыл бұрын

How do I purchase the block of IP’s?

@zack9790 3 жыл бұрын

I have a xr500 but I have to use my internet provider gateway, they can manually shut off the wifi and I can use it but I get a moderate nat.. any ideas

@zachc.1978 3 жыл бұрын

Thanks. I also have ATT and just ordered the 8 (5 usable) static IPs for an additional $15. I have their fiber 1,000 connection. Does this mean each wan port gets 1,000/1,000 or are they split up? five one-gigabit connections--that would be too good for +$15 ATT has scheduled a tech to come out. I assume the reasoning is to swap my gateway from bgw200 to the Pace 526AC. Maybe not.

@LkninBklyn1 2 жыл бұрын

Hey John, I have AT&T BGW 320-500 modem I want to add ASUS ZenWiFi AX6600 Tri-Band Mesh WiFi 6, I want to put the AT&T router in bridge mode. Can this be done so I can use the ASUS?

@dabb1up520 3 жыл бұрын

All i wanna do is have the xfinity router/modem combo to work out in the living room and to use our new router we just bought in our bedroom.. we have the new router connected to the xfinity router/modem combo... we do not have a bridge mode.. the 2nd xfinity turns on bridge mode.. it shuts down all the internet.. we don't want to bridge it.. we want to use the one in our room for us 2 and the 3 people that use the xfinity combo router to run off of that with no troubles.... we keep getting disconnected from our server a lot.. especially when trying to play online games. Is there a way to keep these seperate without bridging? because as i said before.. bridging shuts down all internet and we can't access it until we call xfinity and have them turn off bridge mode.

@joeg4785 3 жыл бұрын

Would you be able to provide a step by step on how to do the same set up on a NVG599

@georgehidow6877 4 жыл бұрын

i have rogers ignite arris xb6 modem with asus gt-ax11000. We pay for gigabit internet and would really love to use my own router. Will this method work? I feel the options in my modem settings are very limited.

@alpineassault 3 жыл бұрын

Hi I was just wondering if bridge mode is absolutely necessary when getting a third-party router?

@deontaywilson9029 5 жыл бұрын

@john glasscock do i need a nighthawk s8000 to get a True Bridge if i already have a xr500 router?

@JohnGlasscock 5 жыл бұрын

@deontaywilson9029 5 жыл бұрын

Thanks! I didn't think so since the xr500 already have QOS in it.

@Toni_De_Arcadia 3 жыл бұрын

I have xfinity gig speed. I get over a gig on my Xbox series x(wired) with Open NAT with IPv4 & IPv6, Apple TV is at 950 consistently(wired), and iPhones and iPads get 700 mbps thru wifi. So I don’t see the need to pay EXTRA when it’s already expensive enough. I get unlimited data, security for my network, flex tv included. 😅🤷‍♂️

@narrowgate3906 5 жыл бұрын

I don't know why it posted it several times I only did it once I promise I'm not spamming!

@jjlnguess7354 2 жыл бұрын

So I just call my provider and ask for a bridge and a static public IP? Then port forward my router for PLEX?

@haloassassin2719 2 жыл бұрын

So if you do this steps you won’t need a switch? Just an cable to the new router

@AR-bu2qp 2 жыл бұрын

Can it be done by purchasing one static IP?

@ccnt89 3 жыл бұрын

Any ping or bandwidth improvement? Jitter and noise improvement??

@pawplayz8077 5 жыл бұрын

Please help idk how to bridge mode with regular att i dont have u-verse

@CaptNemo_ 2 жыл бұрын

Do you have to purchase the static ip or no

@thecentralscrutinizer5105 3 жыл бұрын

Is it possible to take a gateway wireless router and connect it to an ICS (Internet Connection Sharing) computer (192.168.137.1) to distribute wireless access??

@ricn5494 3 жыл бұрын

what i want to do is use my ASUS AX11000-GT as my primary router and my verizon quantum gateway as the secondary but I figure there is some port forwarding I need to do in order to keep my tv function (do not want to use moca adapter) i get tv via tivo with verizon fios media cards in them. One coax going to verizon router which i am sure is coming from ont

@IronCondorSimulations 4 жыл бұрын

What are the pros and cons between this method and the IP Passthrough method?

@mattmyers0876 4 жыл бұрын

If I pay for one single static IP instead and manually assign that to the router would that work? Versus buying 5? For AT&T Fiber specifically.

@JohnGlasscock 4 жыл бұрын

You have to pay for them in blocks. I think the smallest block is 5 or 10

@kanoooo1111 4 жыл бұрын

How would this help portforwarding

@dodge1629 3 жыл бұрын

You don't need portforwarding in this case if you assign the public IP directly to your computer... the only problem is that your computer would be exposed to the whole internet and that's a big deal !

@rmain534 3 жыл бұрын

Can you do this on a wireless router. Do I need a modem and my virgin router?

@vamosajugarpelota 4 жыл бұрын

So this will dramatically increase my 1000mb fiber? I'm getting 200mbps on 5g wifi.

@oudomsambatchorn851 3 жыл бұрын

My speed dropped 5mbps and sometime when I use my pc the speed drop to half unless I restart everything But I fixed my strict nat in game from strict to moderate

@TheRealDocRobertz 2 жыл бұрын

My GUI does not look like this whatsoever so I am beyond stuck and could really use some assistance

@dadon197922 Жыл бұрын

I try to put my router into gaming mode and it keeps telling me double nat

@kanoooo1111 4 жыл бұрын

hello glasscock i need your help with not being able to select use public dhcp pool in lan dhcp , new device dhcp pool because when click the drop down its not there . also in lan settings advanced configurqation there is not outbound protocol config there to be seen on the page. how do i get to those things . HOPE THAT YOU REPLY I NEED YOU BRO!

@rhdtv2002 4 жыл бұрын

Dont you or the ISP provider place the Static range in their modem? That's how I see them generally. I usually place the range in them - then one by one - inside each device I connect directly to the modem- I statically assign them then plug them into the modem to pull the one I assigned.

@tmastersat 2 жыл бұрын

Yea i dont think they will sell you that on fixed wireless

@Fabricio11_81 4 жыл бұрын

Hello John. Could you explain how to do this with a BGW210 ATT router and my XR500 Netgear? I already paid for the Static Ip. Thank you man and happy new year.

@tcc5750 4 жыл бұрын

It will still NAT and Firewall. It simply opens differently. You can wireshark to see what I mean. Honestly just google EAP proxy ubiquiti. That method gives you a true bypass if you have AT&T fiber.

@Fabricio11_81 4 жыл бұрын

TCC Thanks brother. I’ll take a look to that method ok? I have real issues trying to play FIFA20 here. Was using Comcast before and never had this kind of lag, delay and disconnections.

@MikeysWay 4 жыл бұрын

@@Fabricio11_81 I've been having same issues. Never had a problem with spectrum. When I switched over to att fiber, my firestick has been buffering. Att fiber is Fast as hell but would drop to 10mbps randomly throughout the day. Not sure if using this method would help solve my issue

@kyleluidens4179 4 жыл бұрын

MikeysWay I’ve been having the same issue with my connection at home, did this work for you? I’ll have consistent 300-400mbps(sometimes more) then it will suddenly drop to below 50mbps for a couple minutes.

@TheProphegy 4 жыл бұрын

So should I setup this bridge mode before I start setting up my XR500? What steps would you say to do in order to get it done properly?

@JohnGlasscock 4 жыл бұрын

I explained it in the video, you need to have public IPs from your internet provider to do this method

@masm.. 4 жыл бұрын

how can you access ISP's router throw pc connecting to netgear router with WAN IP?

@M530H 4 жыл бұрын

Hey John, I jut cam across your channel and it is all very helpful information. I found your other video that says to use a network swtich nighthawk s800 for gaming purposes. What is a better option using your own router in bridge mode as you describe here or the network switch as detailed in your other video?

@JohnGlasscock 4 жыл бұрын

If you don't mind spending the extra money per month, the static IPs are better

@M530H 4 жыл бұрын

@@JohnGlasscock I will check with my provider to see how much extra it would be for that. If I end up going the switch route, I'll be sure to use your Amazon link in the other video. Does one method have less latency than the other?

@halfmanhalfamazing2198 4 жыл бұрын

hey john does it improve your connection? for online gaming?

@claytonmagnet9961 4 жыл бұрын

Whats the difference between bridge mode and true bridge mode? I have bridge mode enabled on my PON and use my Asus router for DHCP and my ISP issues dynamic IP's. I dont need a static IP to set up bridge mode.

@JohnGlasscock 4 жыл бұрын

Bridge mode with att is broken