TRX4M Goes Brushless!!! Installing & Testing A Furitek Micro Komodo and Lizard Pro ESC!

Рет қаралды 45,233

Күн бұрын

Furitek Micro Komodo for TRX4M: bit.ly/3PwUa7Q
Furitek Lizard Pro ESC: bit.ly/3l9BwV6
CCxRC TRX4M Bearings: bit.ly/3BCdYkb
00:00 Intro / Game Plan
01:24 Opening Spare Transmission
02:40 Installing Bearings
03:00 Installing the Micro Komodo
06:32 Removing The Battery Tray
08:40 Removing ECM
09:05 Removing the Transmission
10:13 Re-installing Transmission
12:18 Furitek Lizard Pro & Avatar RX
13:00 Installing Lizard Pro ESC
17:10 Installing RX
19:00 Binding Radio
20:26 Using Furicar App To Setup ESC
22:18 Run Footage
Click to subscribe ⇨ bit.ly/Sub-CCxRC
WAYS YOU CAN SUPPORT THE CHANNEL:
1. Buy CCxRC Products at CCxRC.com
2. The channel is supported by affiliate links that don't cost you any extra money, but does give me a percentage of the purchase price for directing traffic their way if you use the following links.
Shop at Horizon Hobby: bit.ly/HH-CCxRC
Shop at Amain: bit.ly/Amain-CCxRC
Shop at Amazon: amzn.to/3s1BdNW
3. You can also support by buying CCxRC Shirts and Merch ⇨ teespring.com/stores/ccxrc
----------------------------------
Connect with CCxRC
----------------------------------
Facebook ⇨ / ccxrc
Instagram ⇨ /
Twitter ⇨ / ccxrc
----------------------------------------------------------
Best KZfaq Account Management: Tube Buddy ⇨ bit.ly/YT_TubeBuddy
DISCLOSURE
----------------------------------------------
The product shown in this video may have been sent to me for review. Regardless, I do not get paid by the companies to make the videos, but many of the links contained in the description are affiliate links and I may benefit from a small commission if you purchase something using the links. It is my duty to you to provide you with my honest and unbiased opinion about the products that appear on this channel to help you make informed decisions. This channel makes money through views, and if you don't trust the content, it doesn't do either of us any good. If you plan on making a purchase and want to support the channel using the links, I thank you in advance. I look forward to making more great reviews for you.

Пікірлер: 95

@shawnthomas444 Жыл бұрын

Here is how I remember- 1 to turn and 2 to burn lol

@08KoolBoy Жыл бұрын

Ah yes, a true man of culture I see

@expediterfromgeorgia7981 2 ай бұрын

@@08KoolBoyI was gonna comment the same. That’s how I always remember 👍

@makestuffbetter19 Жыл бұрын

Remember to line up your u-joints so they are in phase with the one at the other end of the shaft. It am not matter so much on the tiny trucks but will help make the wheel drive smoother. P.S. best knife ever!

@expediterfromgeorgia7981 2 ай бұрын

My new furitek stinger system, bearings, and gears are arriving today. Can’t wait to install it all

@plincoman Жыл бұрын

man i kept hearing the printer thinking wtf is going on with the audio, figured it out like a minute right before it was mentioned. Nice build btw! I dont have a crawler yet and this is looking tempting.

@just_inolredneck8319 Жыл бұрын

That gorilla tape is awesome! Also I love the pro x’s! Especially after they get broken in.. but that’s most tires!

@lowlight8466 Жыл бұрын

I have used the clear gorilla tape for a couple years now.... it works great!

@Moggmodels23 Жыл бұрын

Great video bud looking good nice jeep

@PSYCHO13GARAGE Жыл бұрын

I might have to look into making one of my TRX4Ms brushless. I just ordered a second one. LOL

@andrewrichey7374 Жыл бұрын

Super cool Tony

@halmakenreuther8843 Жыл бұрын

Exciting to see how slow this little outrunners can turn without cogging especially being sensorless...do you have any comparison on runtime between brushed/brushless setup?

@danon-theautisticmaker8112 Жыл бұрын

it would be interesting to see it with the low gear set. I think it'd also be interesting to see it with the brushless, & the high gear set. obviously wouldn't b any good for crawling, but it'd b smoken fast!

@jemshobbies Жыл бұрын

definitely interested in seeing this with low range gears

@lordharr123456 Жыл бұрын

Please show a video with the low range gears I stalled and on 2s and 3 s as well please.

@rrzrrich Жыл бұрын

I would suggest adjusting the throttle curve slightly and turn down your start up power to low I had seen recently where @exocaged suggested that and it definitely helps with the slow speed jump to running hope this helps !

@rcglock9608 Жыл бұрын

Yes that is what I use now for servo tape. It might even b better

@Zaclira31 Жыл бұрын

Awesome video! Question, is the Avatar in that configuration water proof? Is there a water proof version that would compliment the Ultimate ESC?

@plukensteinpaint Жыл бұрын

Let’s see the low end gears for fun🎉

@Jbzy3000 Жыл бұрын

Seems like the punch is turned up to high. I like this setup. Made me not so scared of upgraded these little rigs.

@Island-RC Жыл бұрын

Try turning the punch setting down to 1 or 2 first then try and playing with the throttle curve on the app.

@ICanDoItMyself 6 ай бұрын

I did this with the new Cedar motor and stock gearing. But it was clogging like crazy! I hated it for crawling. I’ll try the crawler gears to see if I will be satisfied with that. Otherwise I’ll stick with an INJORA motor or maybe this setup with the micro komodo will work. I’ll keep watching! Link for the electric driver?

@ritchi101 7 ай бұрын

Nice build. Can you do this same set up with the FMS FCX18 LC80?

@patrickjaquemet9732 Жыл бұрын

New to RC and definitely interested in going brushless on my trx4m. Question though... I have the stock transmitter and receiver (first rc so I dont have a tqi laying around), what would be the cheapest way to get that brushless setup to work? Will any 2 channel transmitter and receiver work?

@sammyboswelldirtybrc7580 8 ай бұрын

Hey Tony what electric screwdriver are u using looks pretty fast 😎👍🔥🔥

@nielsjuhr594 Жыл бұрын

Will that tire glue last especially with that much torque when utilizing the higher speeds to hop rocks or hit the tail? Noticed a big performance increase with the Furitech electronics. 👍

@CCxRC Жыл бұрын

When they ship, they should have brass or steel pinions

@Aderas82 Жыл бұрын

Just got mine installed. Are the screws supposed to go through the the black mounting plate and make contact with the red/silver plate as well?

@jemshobbies Жыл бұрын

also congrats to pablo on 1k views....lol

@CCxRC Жыл бұрын

I had to leave that Easter egg in there

@rc_amigos Жыл бұрын

how fast would it be with the HS gears? faster than stock motor?

@TKim103 Жыл бұрын

Deets on the electric screwdriver - my hands will love you😂

@gaffle7646 Жыл бұрын

Your statement sounds like it comes from a Massage parlor worker. 😮

@AndyRC Жыл бұрын

Like others have said adjusting the throttle curve will help if that radio has that option or use the flysky GT5 etc. I just wish the furytek stuff wasn't so expensive here in Canada. It is way over 200?$ for a good setup. That's a bit much considering what I already have tied up in it already. Lol. We are talking price of a 1/8th arrma ..lol

@CCxRC Жыл бұрын

I get it Andy. That does make it pricey.

@Island-RC Жыл бұрын

I have 3 of them so far at 200 cad a pop. I feel ya. Going to need to wait a little for the 4th one

@crystalwolfmoon2863 Жыл бұрын

all the proprietary spares and upgrades are overpriced for this unfortunately.i bet there are some good lower priced setups yet to be discovered.

@zm6658 Жыл бұрын

any updates on the throttle control and touchiness?

@Wicked03GT Жыл бұрын

I need a Komodo for my Scythe V1 chassis kit...Debating on what to do with transmission, thinking about giving the Mofo RC billet a go.

@CCxRC Жыл бұрын

I just buy the Komodo installed on the Stellar transmission. Then you get it fully assembled. It's the only way I offer them because it's easy and works well www.ccxrc.com/product-page/copy-of-furitek-micro-komodo-brushless-outrunner-motor-for-scx24

@Wicked03GT Жыл бұрын

@@CCxRC didn’t realize someone had the combo for sale. I ordered myself one and a ESC for the Scythe chassis I got

@CrivRex 7 ай бұрын

I have a fly sky gt3b and gr3e rx and was wondering if furitek has a motor and ecm that could* work with what I have currently? Thx!

@earthcoloredeyes5043 Жыл бұрын

I want a 1/18 scaled K10!

@twooldguysonabananapeel7914 Жыл бұрын

Is there a place to install the lights from traxxas

@misterbrown4122 Жыл бұрын

What is the top speed in that setup? Love the videos

@CCxRC Жыл бұрын

I don’t usually speed test crawlers. I didn’t take the time for this one either. For me it just matters about wheel speed for crawling and it has plenty

@davidmutter7996 Жыл бұрын

What tool is that you are using

@NBC_NCO Жыл бұрын

Just a thought. They make brushless Motors for the Kyosho miniz platform.

@CCxRC Жыл бұрын

I have one…just no time to install it

@NBC_NCO Жыл бұрын

@@CCxRC I hear that. With a full time job and a school age child it's tough for me to get to work out in my little workplace.

@oliverruelas1562 Жыл бұрын

Does this kit come with a receiver? What’s a cheap transmitter/ I can buy that pairs with this furitek?

@FlailinMonkey Жыл бұрын

This isn't a kit, you have to buy the motor ($40) and the ESC ($80) then you have to buy the receiver separate ($44). Furitek sells a transmitter ($120) for use with their micro receivers, they also have a transmitter/micro receiver combo for $150. The Furitek transmitters look kinda low quality to me, but some KZfaqrs seem to like them. Another inexpensive option would be a Flysky GT5 then you need a AFHDS 2A micro receiver.

@genevarides3269 10 ай бұрын

You might have said it to n the video but where did you get this motor for it from???

@CCxRC 10 ай бұрын

I got it from Furitek to test before they were released. I now sell their products in my online store. www.ccxrc.com/product-page/furitek-micro-komodo-brushless-motor-with-11t-brass-pinion-fits-t-word-4m

@lordharr123456 Жыл бұрын

I have that same combo where did you get the motor plate so I can install this? I need to order it ASAP! PLEASE

@Joshman5000 Жыл бұрын

FlubberRC has the adapter plate

@CCxRC Жыл бұрын

Flubber RC makes one for this motor and the larger Komodo. This one ships with the plate from Furitek

@lordharr123456 Жыл бұрын

Thank you.

@alamanako 6 ай бұрын

Great video my friend! I’m sold I think I’ll do the same!

@alanmtb9927 10 ай бұрын

Let’s see low range gear please !!

@ozaricblox2016 Жыл бұрын

That is the single loudest electric screw driver in the world. 😂

@sebastianfranco5893 Жыл бұрын

When will the scx24 wall hanger be back in stock?😅

@CCxRC Жыл бұрын

it is now.

@xhgconde Жыл бұрын

can this be used with the fast gears ? would make it faster ?

@CCxRC Жыл бұрын

Definitely. It would make it pretty quick

@rellis6037 Жыл бұрын

Name of that electric tool you were using? Getting sick of using my full size dewalt😂

@CCxRC Жыл бұрын

This is the screw driver. It’s great amzn.to/3HI8Ajz

@rellis6037 Жыл бұрын

@@CCxRC thank you

@allyoucando8486 Жыл бұрын

TRX 4M was screaming for Furitek so badly

@dzamajRC Жыл бұрын

hello is furitek waterproof?

@tonyborg6918 Жыл бұрын

After change the ESC the light kit working with the new ESC or not??????

@davidseychell Жыл бұрын

@tonyborg6918 Жыл бұрын

????????????

@tonyborg6918 Жыл бұрын

????????

@davidseychell Жыл бұрын

@@tonyborg6918 ??????

@samcarmel6975 Жыл бұрын

You running it in 2 or 3s?

@CCxRC Жыл бұрын

Only on 2s so far

@Rs817t Жыл бұрын

Why is that motor spinning like that? Is that something new?

@Sysiphos Жыл бұрын

It's called an outrunner, they're not that new but less common in cars

@drewp9112 7 ай бұрын

the wires are twisted to reduce unwanted rf / radio electronic interference

@absolut3zr0 Жыл бұрын

What is that tool used throughout the video?

@CCxRC Жыл бұрын

amzn.to/3HI8Ajz

@CB-ql2qv Жыл бұрын

Why does my same setup cog so bad

@dua4436 4 ай бұрын

Can l install this motor on the stock ESC?

@CCxRC 4 ай бұрын

No. It requires a brushless capable ESC

@CB-ql2qv Жыл бұрын

Mine cogs like crazy and of course can't get ahold of furitek

@rccrawlingcrab8001 Жыл бұрын

1 to turn 2 to burn

@iamn2computers Жыл бұрын

Be carefull idk if that gorilla tape is the permanent one or not but it will tear up whatever you trying to pull it off

@CCxRC Жыл бұрын

It’s more like a putty…like servo tape

@johnabelljr1997 Жыл бұрын

I was using ear buds and whatever you have running in the background is Really ANNOYING! Otherwise I really enjoyed the show ☺

@darkelement8953 Жыл бұрын

I can hear a 3d printer

@CCxRC Жыл бұрын

You got it! My printers were running non-stop for a while

@bradybuckner6184 Жыл бұрын

fast eddy is the goat for bearings.

@CCxRC Жыл бұрын

They make great bearings