Trying to fix an old Sakundiak
Рет қаралды 332
6 ай бұрынWorking on an old drill fill.
@jordanbeardy8798 6 ай бұрын
Have fun at school and thanks for the vidja enjoyed it👍👍
@benedict_323 6 ай бұрын
Best of luck with school and safe travels.
@kyfarmerman 6 ай бұрын
Thank you
@bcpfarmandtrucking6560 6 ай бұрын
Have fun at school...before you know it it will be summer break
@barneyshort8227 6 ай бұрын
School will be your source of people you will network with in your life at the ranch!!!
@roosty6 6 ай бұрын
Been a while since I ran one of those but mine was a Westfileld with direct drive, motor right on the bottom of the auger. The solenoid should have worked. Did the auger turn at all? Did you push the tractor hydraulic lever to neutral instead of float? Dong that puts a shock load on the whole hydraulic circuit and can blow up a motor, or a hose.
@kyfarmerman 6 ай бұрын
Solenoid might have worked but I didn’t want to put new wires on it. Auger would spin about a half turn and blow the hose out. That’s a good point about putting the hydraulic to float when you shut it off. I always forget that part.
@asquithmainlines699 6 ай бұрын
What a difference a week makes. It is now - 25 and we are expecting 10 to 15 cms of snow………. You escaped just in time.
@kyfarmerman 6 ай бұрын
Yepp
Girl Mechanical
Рет қаралды 36 М.