TSDZ2 Mid Motor Installation Video

Рет қаралды 77,859

8 жыл бұрын

TSDZ2 Mid Motor Installation Video
If u have any interest ，welcome to connect with us！
whatsapp/wechat： +86-18625292991
skype：anne.xu1992
mail：anne@cnebikes.com

Пікірлер: 24

@stonehill27 5 жыл бұрын

Don't put spoke magnet to close with speed sensor (about 1 mm) .You can get 99.9 km/h error when walking with bike or pedaling at low speed. Also laggy performance with poor or no power when pedaling starts, from stand still. Try increase soace between magnet and sensor. If no luck, try other wheel magnet from old cycle computer.

@uilleamgilvoni4295 8 жыл бұрын

Hello, this is a fantastic video, hope you keep loading more about this motors, also about hub motors would be great!

@SquadraBike 10 ай бұрын

Very nice!

@SHINE88 4 жыл бұрын

Great video. I am mostly done the installation already. I am filming it and will upload video when finished.

@aquariuskiwilog 3 жыл бұрын

Yes, please do. Seriously considering getting the 48v kit soon!

@SHINE88 3 жыл бұрын

@@aquariuskiwilog I have the 52v. Motor is on and battery. Just need new bar tape and brake lines then I will finish video.

@PutYHWH1st 6 жыл бұрын

Should also put e brake and throttle ( if applicable to you) installation

@phatmeow7764 6 жыл бұрын

Hi thks for the video - perhaps share what sort of max speeds and range to expect would be something viewers are keen to know ^^

@piers927 6 жыл бұрын

like 25-40

@volapas 5 жыл бұрын

I'm curious, if you turn the throttle, the pedals spin faster with your legs on them? And can i go without using my legs at all?

@TheUnfired 7 жыл бұрын

do you know if the motor can be used as generator?

@mrprofile101 3 жыл бұрын

If you’re talking about regenerative braking, no. It cannot.

@nikolajovanovic7462 5 жыл бұрын

Can you tell me dimensions of the scale using to check clearance for the motor. Thanks.

@mikkoravi 5 жыл бұрын

76mm from the center. Check the pictures on this Extension kit, it's the last one. www.eco-ebike.com/products/tsdz2-upgrade-bottom-bracket-axle-extension-in-92mm-100mm-120mm

@nicholasmorrill4711 2 жыл бұрын

@@mikkoravi I don't think that measurement is 76mm you can get a fairly accurate figure off the gauge when it is seen at the 37 second stage.I think you were just trying to flog him an additional product. I estimate the dimension to be about 61.41 not the 76mm they have stated. Really what it needs is proper Engineering drawings & that seems to be beyond the Chinese! If the people who produced this video gave the measurements for that gauge it would help! As it is it makes no sense.

@mikkoravi 2 жыл бұрын

@@nicholasmorrill4711 i don't sell anything. The product on the link is not relevant, only the LAST PICTURE, like i wrote..

@mikkoravi 2 жыл бұрын

@@nicholasmorrill4711 yeah, the dimensions of the scale are in the last picture dumbass.

@nicholasmorrill4711 2 жыл бұрын

@@mikkoravi The last photo in the link you provided shows an unusual frame probably a fat tire bike & I think that 76mm dimension is pure fiction. It looks to me like they have failed or deliberately omitted to take off half the bottom bracket diameter in order to give you an accurate measurement from the center line..

@jonienglish3231 6 жыл бұрын

HOW MUCH ??? WHERE TO BUY ??\\ EBAY

@piers927 6 жыл бұрын

ali express

@PutYHWH1st 6 жыл бұрын

recycles ebikes d o t c o m great guys great service

@TheMetalkon 5 жыл бұрын

pswpower has good prices

@nicholasmorrill4711 2 жыл бұрын

I am not going to take the risk of buying one of these motors until accurate measurements are released so that I can find if one of them will fit my frame.That gauge is useless without them & I cannot find a proper Engineering drawing anywhere that shows them. Piss poor........you have lost a potential customer.

@ELESMART-HANDCYCLE Жыл бұрын

Maybe you will still need it, or your relatives and friends will want it, we have been Website: www.cnebikes.com Store: cnebikes.en.alibaba.com/ Email: sales07@cnebikes.com Whatsapp: +86 18151205233