This looks awesome man! I never knew this was available! When I bought mine I thought that this is exactly what it needed to look perfect! Great work!
@SuperCheesyMan Жыл бұрын
Thanks man!I'm glad you like it. My mount is completely custom as the Tuareg doesn't have enough mounting points under the triple tree. You can check my previous videos to see what I did. CamelADV is working on theirs as well
@mikebaines4111 Жыл бұрын
Hi what fender did you use? Going to do this on mine
@SuperCheesyMan Жыл бұрын
@@mikebaines4111 it's the Polisport Universal SM Line
@timothybrockbank747411 ай бұрын
Looks great
@BeijingOffRoadAdventures Жыл бұрын
I like the High Fender a lot! Makes the bike look much better. As for the front brake oil line, another solution would be completely removing one of the brake rotors and caliper.
@SuperCheesyMan Жыл бұрын
Thanks Man, yeah there are multiple solutions about the brake line Like you said, make a single brake caliper conversion Or cut the front of the OEM fender, and cut in half the high fender. Like the new T7 extreme edition and the new KTM 890 Adventure Super moto
@shaunrose590610 ай бұрын
Looks much better . Love it ❤
@twowheelsandathrottle Жыл бұрын
That looks so much more "Moto" - I love it!
@SuperCheesyMan Жыл бұрын
yeah it's a nice change for the standard look :)
@lyubengeorgiev17512 ай бұрын
This is the best looking Tuareg 660 front! Anyhow, I guess it was a costly change of the forks but I guess you can still use the original forks and add high fender.
@SuperCheesyMan2 ай бұрын
Thanks, adding the fork guards were cheap. Got a set from a used KTM 890r adventure for 30 bucks :)
@lyubengeorgiev17512 ай бұрын
@@SuperCheesyMan Ooh I understood that you had changed the whole fork with WP forks from KTM 890r. My mistake. I hope that there is not a lot of vibrations on the front tire with the high Polisport fender because it looks amazing. I have experienced issues with high fender only when the speed is above 120 km/h and there are strong side winds.
@SuperCheesyMan2 ай бұрын
@@lyubengeorgiev1751 oh hell no I'm not that rich 😅 My bike has been very stable with the high fender....
@Nulrom Жыл бұрын
I think looks awesome but for what I need to do I will stick with the standard. I prefer more illumination on the road. Good one 👍
@SuperCheesyMan Жыл бұрын
The illumination doesn't change with the high fender on, however I find that the Tuareg isn't very bright when riding at night. Adding 2 fog/spot lights makes a big difference :)
@Nulrom Жыл бұрын
@@SuperCheesyMan on my cfr250l I can see clearly that the beam is blocked by the fender, you have the shadow of it. I hope that on the tuareg will not have that problem cause with the high fender is so sweet
@SuperCheesyMan Жыл бұрын
@@Nulrom the CRF's fender is waaaay longer than the Polisport I installed (I had CRF Rally). Really it doesn't change a thing here :)
@Nulrom Жыл бұрын
@@SuperCheesyMan I'm so glad to hear 🤩
@danielv603 Жыл бұрын
Salut Efixe! Sympa le mod! Je voudrais savoir aussi d'autres choses, tu es content du sabot moteur heed? Les support latérale de GIVI sont-ils solides en cas de chute? Merci d'avance pour ta réponse ✌😉
@SuperCheesyMan Жыл бұрын
Salut Daniel, ouaip franchement HEED c'est du bon matériel, je fais tomber ma moto souvent quand je fais du offroad et elles tiennent bien le coup. J'ai cassé les fixations du sabot sur un énorme caillou en descendant une pente, et j'ai pu racheter des nouvelles pièces chez HEED. J'ai remplacé mes protections par le nouveau sabot AXP et les barres de protection Outback Motortek (elles se plient super facilement. A éviter) En gros HEED a le meilleur rapport qualité/prix :)
@SuperCheesyMan Жыл бұрын
J'ai mal lu ta question ahah. Les supports latéraux tu parles des porte bagages GIVI? Si c'est le cas, ouaip suuuper solide :)
@sergeyskripnikov12852 ай бұрын
what brand of high fender didn u instal on your bike?
@SuperCheesyMan2 ай бұрын
Polisport SM universal
@granthammon90234 ай бұрын
Love the setup! What headlight protector do you have?
@SuperCheesyMan4 ай бұрын
It's the AliExpress one. Just look it up. Tuareg 660 headlight protector. :) I painted mine in white
@granthammon90234 ай бұрын
@@SuperCheesyMan Looks awesome. Love the look!
@SuperCheesyMan4 ай бұрын
@@granthammon9023 thanks bud :)
@valdemar79867 ай бұрын
awesome build! Is there any chance you can share you design for the fender adaptor? I can wire you some money for it as well. Thank you.
@SuperCheesyMan7 ай бұрын
Oh man you don't need to. CamelADV now sells a high fender kit for the Tuareg. Look it up on google :)
@francescoalessandropetrocc7035 Жыл бұрын
What bike is the front fender? Are there any modification to make to mount it? Thank you
@SuperCheesyMan Жыл бұрын
Front fender is a Polisport Universal SM, The mounts are completely custom. CamelADV is working on theirs but no ETA
@FMR189 Жыл бұрын
Is it easy to change the oil line and fill it up again? I am I little concerned about the abs
@SuperCheesyMan Жыл бұрын
I was concerned too. Turned out it was super easy. Just a normal procedure to bleed the brakes. To flush the abs pump, take the bike for a ride and brake hard to activate the ABS. Done!
@rogerlosberger75410 ай бұрын
Hello Looks great 👍where do you find the hose clamps?
@SuperCheesyMan10 ай бұрын
Hey I designed them and got them 3D printed. Now I replaced them with CNC clamps I found on AliExpress. Much better and durable
@davidprachar52226 ай бұрын
@@SuperCheesyMando you have link pls?
@SuperCheesyMan6 ай бұрын
@@davidprachar5222 yup right here a.aliexpress.com/_mqMyKEK
@PierreS-um1bv Жыл бұрын
I love the crash bars you put. Do you have the brand and model please?
@SuperCheesyMan Жыл бұрын
hey man, those are HEED crash bars/skid plate combo, look for Heed Tuareg 660 on google :)
@Angry-Lynx4 ай бұрын
gay AF. high fender on enduro, low on adv ;
@SuperCheesyMan4 ай бұрын
Hahahaha that's cute, but I don't care about your opinion Let me guess you also liked your own comment? So gaaaaaay 🤣🤣 It must sucks being you 🤣🤣