Tube Works Blue Tube Teardown! See what's inside!

  Рет қаралды 2,382

Gray Bench Electronics

Gray Bench Electronics

Күн бұрын

Welcome back to the bench! Today we're taking apart a 1999 Blue Tube tube overdrive pedal from Tube Works. Enjoy!
Follow me on instagram: @graybenchelec
Business contact: graybenchelec@gmail.com
#tubeworks #bluetube #tubeoverdrive #tubepedal #vacuumtubes #electronics #guitarpedals #diypedals

Пікірлер: 16
@DavidRavenMoon
@DavidRavenMoon 2 ай бұрын
I have a Blue Tube I bought around 1990. The circuit is in dire need of an output buffer. The 500k pot is an indication that it has a high impedance output. It’s easily loaded down by some pedals. I used mine on bass. By the time I’d get to unity gain on the drive it would be too distorted, so I used a 12AU7 tube instead. No hot melt in my unit. The other issue is a slight hum. Could probably stand to have a DC tube heater.
@gph2193
@gph2193 2 ай бұрын
The gem was their 2x90w Mosvalve power amp. That had character.
@Loscha
@Loscha 2 ай бұрын
Another really great video! Thanks!
@BlakeC27
@BlakeC27 2 ай бұрын
Someone sent me one of these to install a power jack after the transformer failed so the could use an external 15-volt AC power supply instead. I also modified for true bypass.
@jesseyasaitis9036
@jesseyasaitis9036 2 ай бұрын
I have a black colored model that has transformer hum, even after I changed it.
@maxmcmillan99
@maxmcmillan99 2 ай бұрын
I had a Real Tube rack unit back in the day and I recall it being somewhat noisy. I see it has half-wave rectification - for the cost of a a few more diodes, they could have improved the power supply greatly. Do you notice excessive hum? As a side note, I recall seeing on an internet forum (many years ago) an anecdotal statement that increasing the voltage to the circuit greatl improved it's performance.
@therealjamesmarchant
@therealjamesmarchant 2 ай бұрын
The resistors look like carbon film not carbon comp to me. For those interested, current regulations require that the safety ground is connected to its own screw terminal which must be marked with a ground symbol and not shared with any other connection.
@graybenchelec
@graybenchelec 2 ай бұрын
Correct! That was a flub on my part, definitely carbon film 1/4W
@kevinafflack
@kevinafflack 2 ай бұрын
I use the Real Tube version for a lead tone and it really sings. Unfortunately the tone controls are too interactive with each other, especially the treble. There’s only one spot where it sounds good, otherwise it rolls off all the mids and bass. Is there anyway to mod this behavior? Interesting that the Blue Tube uses a 100k vs 500k for the treble. Would changing the pot to 100k help?
@gph2193
@gph2193 2 ай бұрын
Had one, nothing special to it except that the power cord was a lame pain.
@BlakeC27
@BlakeC27 2 ай бұрын
If I recall correctly, the tone stack was of the type that if you turning the mids all the way down, the signal was lost completely.
@kennyjohnson336
@kennyjohnson336 2 ай бұрын
Does the tube actually get hot? Seems like it wouldn't. 🤔
@graybenchelec
@graybenchelec 2 ай бұрын
Sure, as hot as any other 12AX7. Whether the vents are really necessary is another question, but if you’re doing a custom enclosure why not?
@kennyjohnson336
@kennyjohnson336 2 ай бұрын
@@graybenchelec Even if the tube is only getting 12V?
@graybenchelec
@graybenchelec 2 ай бұрын
@@kennyjohnson336 I believe so, the heat in a preamp tube like a 12AX7 is 99% filament, about 1.8W.
@BRYDN_NATHAN
@BRYDN_NATHAN 2 ай бұрын
nat atbot GPT-3 [:|]... "thank you. I don't know about stompinging on a tube how about a germanium modification. more 12ax7 pls +2 [BEEP]
BOSS TB-2W Tone Bender Teardown! See what's inside! // Gray Bench Electronics
22:46
Earthquaker Plumes Teardown! See what's inside!
16:55
Gray Bench Electronics
Рет қаралды 5 М.
Heartwarming: Stranger Saves Puppy from Hot Car #shorts
00:22
Fabiosa Best Lifehacks
Рет қаралды 17 МЛН
1❤️
00:17
Nonomen ノノメン
Рет қаралды 12 МЛН
Gearless Magnet Bike
17:57
Tom Stanton
Рет қаралды 6 МЛН
Real Tube Tube Works
3:27
shnobel
Рет қаралды 13 М.
How backspin ACTUALLY works - in super slow motion
15:50
Steve Mould
Рет қаралды 664 М.
Barber Tone Pump Teardown! See what's inside!
11:25
Gray Bench Electronics
Рет қаралды 1,5 М.
I 3D Printed a $1,224 Chair
23:56
Morley Kert
Рет қаралды 78 М.
Vintage Stereo: 6 Things I Had Completely Wrong!
17:24
Skylabs Audio
Рет қаралды 50 М.
Warm Audio Warm bender Teardown! See what's inside!
22:51
Gray Bench Electronics
Рет қаралды 5 М.
JHS Pedals Bender Teardown! See what's inside!
10:25
Gray Bench Electronics
Рет қаралды 6 М.
Cusack Music Tap-A-Scream Teardown! See what's inside!
14:06
Gray Bench Electronics
Рет қаралды 1 М.